From 748e4f3d702def1a4bff191e0cf93b6a05340f01 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:41:34 +0000
Subject: [PATCH] add gpio led uart

---
 kernel/Documentation/devicetree/bindings/hwmon/gpio-fan.txt |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/kernel/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/kernel/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
index 2becdcf..f4cfa35 100644
--- a/kernel/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
+++ b/kernel/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
@@ -12,7 +12,8 @@
 - alarm-gpios: This pin going active indicates something is wrong with
   the fan, and a udev event will be fired.
 - #cooling-cells: If used as a cooling device, must be <2>
-  Also see: Documentation/devicetree/bindings/thermal/thermal.txt
+  Also see:
+  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
   min and max states are derived from the speed-map of the fan.
 
 Note: At least one the "gpios" or "alarm-gpios" properties must be set.

--
Gitblit v1.6.2