From 748e4f3d702def1a4bff191e0cf93b6a05340f01 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:41:34 +0000
Subject: [PATCH] add gpio led uart
---
kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt | 38 +++++++++++++++++++++++++++++---------
1 files changed, 29 insertions(+), 9 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
index eb7cdd6..627efc7 100644
--- a/kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
+++ b/kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
@@ -3,12 +3,24 @@
Required properties:
- compatible : Should be "nxp,lpc1850-gpio"
-- reg : Address and length of the register set for the device
-- clocks : Clock specifier (see clock bindings for details)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two
- - First cell is the GPIO line number
- - Second cell is used to specify polarity
+- reg : List of addresses and lengths of the GPIO controller
+ register sets
+- reg-names : Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and
+ "gpio-gpoup1-ic"
+- clocks : Phandle and clock specifier pair for GPIO controller
+- resets : Phandle and reset specifier pair for GPIO controller
+- gpio-controller : Marks the device node as a GPIO controller
+- #gpio-cells : Should be two:
+ - The first cell is the GPIO line number
+ - The second cell is used to specify polarity
+- interrupt-controller : Marks the device node as an interrupt controller
+- #interrupt-cells : Should be two:
+ - The first cell is an interrupt number within
+ 0..9 range, for GPIO pin interrupts it is equal
+ to 'nxp,gpio-pin-interrupt' property value of
+ GPIO pin configuration, 8 is for GPIO GROUP0
+ interrupt, 9 is for GPIO GROUP1 interrupt
+ - The second cell is used to specify interrupt type
Optional properties:
- gpio-ranges : Mapping between GPIO and pinctrl
@@ -19,21 +31,29 @@
gpio: gpio@400f4000 {
compatible = "nxp,lpc1850-gpio";
- reg = <0x400f4000 0x4000>;
+ reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
+ <0x40088000 0x1000>, <0x40089000 0x1000>;
+ reg-names = "gpio", "gpio-pin-ic",
+ "gpio-group0-ic", "gpio-gpoup1-ic";
clocks = <&ccu1 CLK_CPU_GPIO>;
+ resets = <&rgu 28>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>,
...
<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>;
};
gpio_joystick {
- compatible = "gpio-keys-polled";
+ compatible = "gpio-keys";
...
- button@0 {
+ button0 {
...
+ interrupt-parent = <&gpio>;
+ interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
};
};
--
Gitblit v1.6.2