From 6778948f9de86c3cfaf36725a7c87dcff9ba247f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 08:20:59 +0000
Subject: [PATCH] kernel_5.10 no rt
---
kernel/tools/testing/selftests/rseq/rseq-s390.h | 133 ++++++++++++++++++++++++++++++++++++++------
1 files changed, 115 insertions(+), 18 deletions(-)
diff --git a/kernel/tools/testing/selftests/rseq/rseq-s390.h b/kernel/tools/testing/selftests/rseq/rseq-s390.h
index 1069e85..4e6dc5f 100644
--- a/kernel/tools/testing/selftests/rseq/rseq-s390.h
+++ b/kernel/tools/testing/selftests/rseq/rseq-s390.h
@@ -1,6 +1,13 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
-#define RSEQ_SIG 0x53053053
+/*
+ * RSEQ_SIG uses the trap4 instruction. As Linux does not make use of the
+ * access-register mode nor the linkage stack this instruction will always
+ * cause a special-operation exception (the trap-enabled bit in the DUCT
+ * is and will stay 0). The instruction pattern is
+ * b2 ff 0f ff trap4 4095(%r0)
+ */
+#define RSEQ_SIG 0xB2FF0FFF
#define rseq_smp_mb() __asm__ __volatile__ ("bcr 15,0" ::: "memory")
#define rseq_smp_rmb() rseq_smp_mb()
@@ -37,22 +44,54 @@
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(label) "b\n\t" \
+ ".popsection\n\t"
+
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \
".popsection\n\t"
#elif __s390__
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".long 0x0, " __rseq_str(label) "b\n\t" \
+ ".popsection\n\t"
+
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) "\n\t" \
".popsection\n\t"
#define LONG_L "l"
@@ -85,14 +124,14 @@
".long " __rseq_str(RSEQ_SIG) "\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
- "j %l[" __rseq_str(abort_label) "]\n\t" \
+ "jg %l[" __rseq_str(abort_label) "]\n\t" \
".popsection\n\t"
#define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \
".pushsection __rseq_failure, \"ax\"\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
- "j %l[" __rseq_str(cmpfail_label) "]\n\t" \
+ "jg %l[" __rseq_str(cmpfail_label) "]\n\t" \
".popsection\n\t"
static inline __attribute__((always_inline))
@@ -102,6 +141,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -121,8 +165,8 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -134,16 +178,21 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -154,12 +203,17 @@
*/
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -184,8 +238,8 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -199,16 +253,21 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -220,6 +279,9 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -236,8 +298,8 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[count] "r" (count)
@@ -249,12 +311,15 @@
, error1
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
#endif
}
@@ -268,6 +333,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -290,8 +360,8 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -307,16 +377,21 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -339,6 +414,12 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -363,8 +444,8 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -380,18 +461,24 @@
, error1, error2, error3
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("1st expected value comparison failed");
error3:
+ rseq_after_asm_goto();
rseq_bug("2nd expected value comparison failed");
#endif
}
@@ -407,6 +494,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
LONG_S " %[src], %[rseq_scratch0]\n\t"
LONG_S " %[dst], %[rseq_scratch1]\n\t"
LONG_S " %[len], %[rseq_scratch2]\n\t"
@@ -466,8 +558,8 @@
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -487,16 +579,21 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
--
Gitblit v1.6.2