From 6778948f9de86c3cfaf36725a7c87dcff9ba247f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 08:20:59 +0000
Subject: [PATCH] kernel_5.10 no rt
---
kernel/arch/mips/ralink/mt7621.c | 77 +++++++++++++++-----------------------
1 files changed, 31 insertions(+), 46 deletions(-)
diff --git a/kernel/arch/mips/ralink/mt7621.c b/kernel/arch/mips/ralink/mt7621.c
index d2718de..ca0ac60 100644
--- a/kernel/arch/mips/ralink/mt7621.c
+++ b/kernel/arch/mips/ralink/mt7621.c
@@ -1,7 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*
* Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
* Copyright (C) 2015 John Crispin <john@phrozen.org>
@@ -9,6 +7,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include <asm/mipsregs.h>
#include <asm/smp-ops.h>
@@ -19,11 +19,6 @@
#include <pinmux.h>
#include "common.h"
-
-#define SYSC_REG_SYSCFG 0x10
-#define SYSC_REG_CPLL_CLKCFG0 0x2c
-#define SYSC_REG_CUR_CLK_STS 0x44
-#define CPU_CLK_SEL (BIT(30) | BIT(31))
#define MT7621_GPIO_MODE_UART1 1
#define MT7621_GPIO_MODE_I2C 2
@@ -115,44 +110,6 @@
panic("Cannot detect cpc address");
}
-void __init ralink_clk_init(void)
-{
- int cpu_fdiv = 0;
- int cpu_ffrac = 0;
- int fbdiv = 0;
- u32 clk_sts, syscfg;
- u8 clk_sel = 0, xtal_mode;
- u32 cpu_clk;
-
- if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
- clk_sel = 1;
-
- switch (clk_sel) {
- case 0:
- clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
- cpu_fdiv = ((clk_sts >> 8) & 0x1F);
- cpu_ffrac = (clk_sts & 0x1F);
- cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
- break;
-
- case 1:
- fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
- syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
- xtal_mode = (syscfg >> 6) & 0x7;
- if (xtal_mode >= 6) {
- /* 25Mhz Xtal */
- cpu_clk = 25 * fbdiv * 1000 * 1000;
- } else if (xtal_mode >= 3) {
- /* 40Mhz Xtal */
- cpu_clk = 40 * fbdiv * 1000 * 1000;
- } else {
- /* 20Mhz Xtal */
- cpu_clk = 20 * fbdiv * 1000 * 1000;
- }
- break;
- }
-}
-
void __init ralink_of_remap(void)
{
rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
@@ -160,6 +117,33 @@
if (!rt_sysc_membase || !rt_memc_membase)
panic("Failed to remap core resources");
+}
+
+static void soc_dev_init(struct ralink_soc_info *soc_info, u32 rev)
+{
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return;
+
+ soc_dev_attr->soc_id = "mt7621";
+ soc_dev_attr->family = "Ralink";
+
+ if (((rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK) == 1 &&
+ (rev & CHIP_REV_ECO_MASK) == 1)
+ soc_dev_attr->revision = "E2";
+ else
+ soc_dev_attr->revision = "E1";
+
+ soc_dev_attr->data = soc_info;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr);
+ return;
+ }
}
void prom_soc_init(struct ralink_soc_info *soc_info)
@@ -216,6 +200,7 @@
rt2880_pinmux_data = mt7621_pinmux_data;
+ soc_dev_init(soc_info, rev);
if (!register_cps_smp_ops())
return;
--
Gitblit v1.6.2