From 6778948f9de86c3cfaf36725a7c87dcff9ba247f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 08:20:59 +0000
Subject: [PATCH] kernel_5.10 no rt
---
kernel/arch/arm/boot/dts/s5pv210-goni.dts | 99 +++++++++++++++++++++++++++----------------------
1 files changed, 54 insertions(+), 45 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/s5pv210-goni.dts b/kernel/arch/arm/boot/dts/s5pv210-goni.dts
index eb6d192..ad8d5d2 100644
--- a/kernel/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/kernel/arch/arm/boot/dts/s5pv210-goni.dts
@@ -11,6 +11,8 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"
@@ -33,52 +35,49 @@
0x50000000 0x08000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ pmic_ap_clk: clock-0 {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
- vtf_reg: fixed-regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "V_TF_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- reg = <0>;
- gpio = <&mp05 4 0>;
- enable-active-high;
- };
+ vtf_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- pda_reg: fixed-regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1.8V_PDA";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- reg = <1>;
- };
+ pda_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- bat_reg: fixed-regulator@2 {
- compatible = "regulator-fixed";
- regulator-name = "V_BAT";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- reg = <2>;
- };
+ bat_reg: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
- tsp_reg: fixed-regulator@3 {
- compatible = "regulator-fixed";
- regulator-name = "TSP_VDD";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- reg = <3>;
- gpio = <&gpj1 3 0>;
- enable-active-high;
- };
+ tsp_reg: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "TSP_VDD";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
i2c_pmic: i2c-pmic {
compatible = "i2c-gpio";
- gpios = <&gpj4 0 0>, /* sda */
- <&gpj4 3 0>; /* scl */
+ sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
@@ -88,13 +87,13 @@
reg = <0x66>;
max8998,pmic-buck1-default-dvs-idx = <0>;
- max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
- <&gph0 4 0>;
+ max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+ <&gph0 4 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
<1200000>, <1200000>;
max8998,pmic-buck2-default-dvs-idx = <0>;
- max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+ max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
regulators {
@@ -224,6 +223,11 @@
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
+
+ ap32khz_reg: EN32KHz-AP {
+ regulator-name = "32KHz AP";
+ regulator-always-on;
+ };
};
};
};
@@ -308,6 +312,11 @@
status = "okay";
};
+&rtc {
+ clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci0 {
bus-width = <4>;
non-removable;
@@ -348,7 +357,7 @@
compatible = "atmel,maxtouch";
reg = <0x4a>;
interrupt-parent = <&gpj0>;
- interrupts = <5 2>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
atmel,x-line = <17>;
atmel,y-line = <11>;
@@ -376,10 +385,10 @@
vdd_core-supply = <&ldo14_reg>;
clock-frequency = <16000000>;
- clocks = <&clock_cam 0>;
+ clocks = <&camera 0>;
clock-names = "mclk";
- nreset-gpios = <&gpb 2 0>;
- nstby-gpios = <&gpb 0 0>;
+ nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>;
+ nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>;
port {
noon010pc30_ep: endpoint {
--
Gitblit v1.6.2