From 6778948f9de86c3cfaf36725a7c87dcff9ba247f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 08:20:59 +0000
Subject: [PATCH] kernel_5.10 no rt
---
kernel/arch/arm/boot/dts/omap3-n900.dts | 89 +++++++++++++++++++++++++++++++++-----------
1 files changed, 67 insertions(+), 22 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/omap3-n900.dts b/kernel/arch/arm/boot/dts/omap3-n900.dts
index 00b2eb8..d40c3d2 100644
--- a/kernel/arch/arm/boot/dts/omap3-n900.dts
+++ b/kernel/arch/arm/boot/dts/omap3-n900.dts
@@ -1,16 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 (or later) as
- * published by the Free Software Foundation.
*/
/dts-v1/;
#include "omap34xx.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/*
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -22,7 +20,11 @@
* but it is not widely used and to prevent kernel crash rather AES is disabled.
* There is also no runtime detection code if AES is disabled in L3 firewall...
*/
-&aes {
+&aes1_target {
+ status = "disabled";
+};
+
+&aes2_target {
status = "disabled";
};
@@ -106,6 +108,14 @@
gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
linux,input-type = <EV_SW>;
linux,code = <SW_FRONT_PROXIMITY>;
+ linux,can-disable;
+ };
+
+ machine_cover {
+ label = "Machine Cover";
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
linux,can-disable;
};
};
@@ -485,6 +495,11 @@
regulator-always-on;
};
+/* First two dma channels are reserved on secure omap3 */
+&sdma {
+ dma-channel-mask = <0xfffffffc>;
+};
+
&twl {
twl_audio: audio {
compatible = "ti,twl4030-audio";
@@ -616,63 +631,92 @@
};
lp5523: lp5523@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
- enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+ enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
- chan0 {
+ led@0 {
+ reg = <0>;
chan-name = "lp5523:kb1";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan1 {
+ led@1 {
+ reg = <1>;
chan-name = "lp5523:kb2";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan2 {
+ led@2 {
+ reg = <2>;
chan-name = "lp5523:kb3";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan3 {
+ led@3 {
+ reg = <3>;
chan-name = "lp5523:kb4";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan4 {
+ led@4 {
+ reg = <4>;
chan-name = "lp5523:b";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
};
- chan5 {
+ led@5 {
+ reg = <5>;
chan-name = "lp5523:g";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
};
- chan6 {
+ led@6 {
+ reg = <6>;
chan-name = "lp5523:r";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
};
- chan7 {
+ led@7 {
+ reg = <7>;
chan-name = "lp5523:kb5";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan8 {
+ led@8 {
+ reg = <8>;
chan-name = "lp5523:kb6";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
};
@@ -817,10 +861,6 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
- /* For debugging, it is often good idea to remove this GPIO.
- It means you can remove back cover (to reboot by removing
- battery) and still use the MMC card. */
- cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
/* most boards use vaux3, only some old versions use vmmc2 instead */
@@ -1034,6 +1074,11 @@
};
};
+/* RNG not directly accessible on n900, see omap3-rom-rng instead */
+&rng_target {
+ status = "disabled";
+};
+
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
@@ -1068,7 +1113,7 @@
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_sdi_pins>;
@@ -1091,7 +1136,7 @@
};
&venc {
- status = "ok";
+ status = "okay";
vdda-supply = <&vdac>;
@@ -1104,7 +1149,7 @@
};
&mcbsp2 {
- status = "ok";
+ status = "okay";
};
&ssi_port1 {
--
Gitblit v1.6.2