From 6778948f9de86c3cfaf36725a7c87dcff9ba247f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 08:20:59 +0000
Subject: [PATCH] kernel_5.10 no rt
---
kernel/arch/arm/boot/dts/at91sam9x5ek.dtsi | 270 +++++++++++++++++++++++++++---------------------------
1 files changed, 135 insertions(+), 135 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/at91sam9x5ek.dtsi b/kernel/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 4a2e13c..6d1264d 100644
--- a/kernel/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/kernel/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
*
* Copyright (C) 2012 Atmel,
* 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
*/
#include "at91sam9x5cm.dtsi"
@@ -15,139 +14,6 @@
chosen {
bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
stdout-path = "serial0:115200n8";
- };
-
- ahb {
- apb {
- mmc0: mmc@f0008000 {
- pinctrl-0 = <
- &pinctrl_board_mmc0
- &pinctrl_mmc0_slot0_clk_cmd_dat0
- &pinctrl_mmc0_slot0_dat1_3>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
- };
- };
-
- mmc1: mmc@f000c000 {
- pinctrl-0 = <
- &pinctrl_board_mmc1
- &pinctrl_mmc1_slot0_clk_cmd_dat0
- &pinctrl_mmc1_slot0_dat1_3>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
- };
- };
-
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- usart0: serial@f801c000 {
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "okay";
- };
-
- usb2: gadget@f803c000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_board_usb2>;
- atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- i2c0: i2c@f8010000 {
- status = "okay";
-
- wm8731: wm8731@1a {
- compatible = "wm8731";
- reg = <0x1a>;
- };
- };
-
- adc0: adc@f804c000 {
- atmel,adc-ts-wires = <4>;
- atmel,adc-ts-pressure-threshold = <10000>;
- status = "okay";
- };
-
- pinctrl@fffff400 {
- camera_sensor {
- pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
- atmel,pins =
- <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */
- };
-
- pinctrl_sensor_power: sensor_power-0 {
- atmel,pins =
- <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
- };
-
- pinctrl_sensor_reset: sensor_reset-0 {
- atmel,pins =
- <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
- };
- };
-
- mmc0 {
- pinctrl_board_mmc0: mmc0-board {
- atmel,pins =
- <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
- };
- };
-
- mmc1 {
- pinctrl_board_mmc1: mmc1-board {
- atmel,pins =
- <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
- };
- };
-
- usb2 {
- pinctrl_board_usb2: usb2-board {
- atmel,pins =
- <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */
- };
- };
- };
-
- spi0: spi@f0000000 {
- status = "disabled"; /* conflicts with mmc1 */
- cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
- m25p80@0 {
- compatible = "atmel,at25df321a";
- spi-max-frequency = <50000000>;
- reg = <0>;
- };
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
-
- ssc0: ssc@f0010000 {
- status = "okay";
- };
- };
-
- usb0: ohci@600000 {
- status = "okay";
- num-ports = <3>;
- atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
- &pioD 19 GPIO_ACTIVE_LOW
- &pioD 20 GPIO_ACTIVE_LOW
- >;
- };
-
- usb1: ehci@700000 {
- status = "okay";
- };
};
sound {
@@ -165,3 +31,137 @@
atmel,audio-codec = <&wm8731>;
};
};
+
+&adc0 {
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ wm8731: wm8731@1a {
+ compatible = "wm8731";
+ reg = <0x1a>;
+ };
+};
+
+&mmc0 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mmc1 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc1
+ &pinctrl_mmc1_slot0_clk_cmd_dat0
+ &pinctrl_mmc1_slot0_dat1_3>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pinctrl {
+ camera_sensor {
+ pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+ atmel,pins =
+ <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */
+ };
+
+ pinctrl_sensor_power: sensor_power-0 {
+ atmel,pins =
+ <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_sensor_reset: sensor_reset-0 {
+ atmel,pins =
+ <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
+ };
+ };
+
+ mmc1 {
+ pinctrl_board_mmc1: mmc1-board {
+ atmel,pins =
+ <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
+ };
+ };
+
+ usb2 {
+ pinctrl_board_usb2: usb2-board {
+ atmel,pins =
+ <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */
+ };
+ };
+};
+
+&spi0 {
+ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+ status = "disabled"; /* conflicts with mmc1 */
+
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&ssc0 {
+ status = "okay";
+};
+
+&usart0 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+};
+
+&usb0 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+ &pioD 19 GPIO_ACTIVE_LOW
+ &pioD 20 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_board_usb2>;
+ atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
Gitblit v1.6.2