From 645e752c5a84baeb21015cdc85fc05b7d16312c8 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 01:13:52 +0000
Subject: [PATCH] disable i2c1
---
kernel/arch/arm/boot/dts/ste-href-stuib.dtsi | 32 +++++++++++++++++++++++++-------
1 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/ste-href-stuib.dtsi b/kernel/arch/arm/boot/dts/ste-href-stuib.dtsi
index 35e944d..b8fd8f1 100644
--- a/kernel/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/kernel/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/interrupt-controller/irq.h>
@@ -44,6 +38,8 @@
interrupt-controller;
vcc-supply = <&db8500_vsmps2_reg>;
vio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&stmpe_stuib_mode>;
wakeup-source;
st,autosleep-timeout = <1024>;
@@ -132,6 +128,15 @@
};
pinctrl {
+ /* Pull up this GPIO pin */
+ stmpe {
+ stmpe_stuib_mode: stmpe_stuib {
+ stuib_cfg {
+ ste,pins = "GPIO218_AH11";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
prox {
prox_stuib_mode: prox_stuib {
stuib_cfg {
@@ -190,5 +195,18 @@
};
};
};
+
+ mcde@a0350000 {
+ status = "okay";
+
+ dsi-controller@a0351000 {
+ panel {
+ compatible = "samsung,s6d16d0";
+ reg = <0>;
+ vdd1-supply = <&ab8500_ldo_aux1_reg>;
+ reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+ };
};
};
--
Gitblit v1.6.2