From 645e752c5a84baeb21015cdc85fc05b7d16312c8 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 01:13:52 +0000
Subject: [PATCH] disable i2c1
---
kernel/arch/arm/boot/dts/qcom-msm8974.dtsi | 709 ++++++++++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 602 insertions(+), 107 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/qcom-msm8974.dtsi b/kernel/arch/arm/boot/dts/qcom-msm8974.dtsi
index d9019a4..5f7426f 100644
--- a/kernel/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/kernel/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,14 +1,17 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/interconnect/qcom,msm8974.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Qualcomm MSM8974";
compatible = "qcom,msm8974";
interrupt-parent = <&intc>;
@@ -18,17 +21,17 @@
#size-cells = <1>;
ranges;
- mpss@8000000 {
+ mpss_region: mpss@8000000 {
reg = <0x08000000 0x5100000>;
no-map;
};
- mba@d100000 {
+ mba_region: mba@d100000 {
reg = <0x0d100000 0x100000>;
no-map;
};
- reserved@d200000 {
+ wcnss_region: wcnss@d200000 {
reg = <0x0d200000 0xa00000>;
no-map;
};
@@ -59,15 +62,18 @@
};
rmtfs@fd80000 {
+ compatible = "qcom,rmtfs-mem";
reg = <0x0fd80000 0x180000>;
no-map;
+
+ qcom,client-id = <1>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 0xf04>;
CPU0: cpu@0 {
compatible = "qcom,krait";
@@ -128,6 +134,11 @@
min-residency-us = <2000>;
};
};
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
};
thermal-zones {
@@ -210,11 +221,101 @@
};
};
};
+
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ q6_dsp_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modemtx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ modemtx_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ video_alert0: trip-point0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ wlan_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ gpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 10>;
+
+ trips {
+ gpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
};
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <1 7 0xf04>;
+ interrupts = <GIC_PPI 7 0xf04>;
};
clocks {
@@ -233,17 +334,17 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
+ interrupts = <GIC_PPI 2 0xf08>,
+ <GIC_PPI 3 0xf08>,
+ <GIC_PPI 4 0xf08>,
+ <GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
adsp-pil {
compatible = "qcom,msm8974-adsp-pil";
- interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -259,6 +360,15 @@
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
+
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 8>;
+ qcom,smd-edge = <1>;
+
+ label = "lpass";
+ };
};
smem {
@@ -275,7 +385,7 @@
qcom,smem = <443>, <429>;
interrupt-parent = <&intc>;
- interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 10>;
@@ -300,7 +410,7 @@
qcom,smem = <435>, <428>;
interrupt-parent = <&intc>;
- interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 14>;
@@ -325,7 +435,7 @@
qcom,smem = <451>, <431>;
interrupt-parent = <&intc>;
- interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 18>;
@@ -364,7 +474,7 @@
modem_smsm: modem@1 {
reg = <1>;
- interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -372,7 +482,7 @@
adsp_smsm: adsp@2 {
reg = <2>;
- interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -380,7 +490,7 @@
wcnss_smsm: wcnss@7 {
reg = <7>;
- interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -427,11 +537,15 @@
};
};
- tsens: thermal-sensor@fc4a8000 {
+ tsens: thermal-sensor@fc4a9000 {
compatible = "qcom,msm8974-tsens";
- reg = <0xfc4a8000 0x2000>;
+ reg = <0xfc4a9000 0x1000>, /* TM */
+ <0xfc4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
nvmem-cell-names = "calib", "calib_backup";
+ #qcom,sensors = <11>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
@@ -445,50 +559,50 @@
frame@f9021000 {
frame-number = <0>;
- interrupts = <0 8 0x4>,
- <0 7 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
- interrupts = <0 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
- interrupts = <0 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
- interrupts = <0 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
- interrupts = <0 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
- interrupts = <0 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
- interrupts = <0 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
@@ -586,7 +700,7 @@
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
- interrupts = <0 107 0x0>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -595,17 +709,27 @@
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
- interrupts = <0 108 0x0>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
+ blsp2_uart10: serial@f9960000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf9960000 0x1000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
sdhci@f9824900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 123 0>, <0 138 0>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
@@ -615,11 +739,11 @@
};
sdhci@f9864900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
- <GIC_SPI 224 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC3_APPS_CLK>,
<&gcc GCC_SDCC3_AHB_CLK>,
@@ -629,10 +753,11 @@
};
sdhci@f98a4900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 0>, <0 221 0>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
@@ -692,22 +817,169 @@
clock-names = "core";
};
+ remoteproc@fc880000 {
+ compatible = "qcom,msm8974-mss-pil";
+ reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ cx-supply = <&pm8841_s2>;
+ mss-supply = <&pm8841_s3>;
+ mx-supply = <&pm8841_s1>;
+ pll-supply = <&pm8941_l12>;
+
+ qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ mba {
+ memory-region = <&mba_region>;
+ };
+
+ mpss {
+ memory-region = <&mpss_region>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 12>;
+ qcom,smd-edge = <0>;
+
+ label = "modem";
+ };
+ };
+
+ pronto: remoteproc@fb21b000 {
+ compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+ reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ memory-region = <&wcnss_region>;
+
+ interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ vddpx-supply = <&pm8941_s3>;
+
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ iris {
+ compatible = "qcom,wcn3680";
+
+ clocks = <&rpmcc RPM_SMD_CXO_A2>;
+ clock-names = "xo";
+
+ vddxo-supply = <&pm8941_l6>;
+ vddrfa-supply = <&pm8941_l11>;
+ vddpa-supply = <&pm8941_l19>;
+ vdddig-supply = <&pm8941_s3>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+ status = "disabled";
+
+ qcom,mmio = <&pronto>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
msmgpio: pinctrl@fd510000 {
compatible = "qcom,msm8974-pinctrl";
reg = <0xfd510000 0x4000>;
gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 208 0>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ i2c@f9923000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9923000 0x1000>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
- interrupts = <0 96 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ blsp_i2c3: i2c@f9925000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9925000 0x1000>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ blsp_i2c6: i2c@f9928000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9928000 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
@@ -717,7 +989,7 @@
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9964000 0x1000>;
- interrupts = <0 102 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -728,13 +1000,24 @@
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9967000 0x1000>;
- interrupts = <0 105 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
+ };
+
+ blsp_i2c12: i2c@f9968000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9968000 0x1000>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spmi_bus: spmi@fc4cf000 {
@@ -744,7 +1027,7 @@
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
- interrupts = <0 190 0>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
@@ -770,10 +1053,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -785,10 +1069,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -800,7 +1085,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -816,10 +1101,11 @@
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
@@ -833,20 +1119,17 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
- port@1 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&merger_out>;
};
};
@@ -854,13 +1137,13 @@
};
funnel@fc31b000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0xfc31b000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -873,12 +1156,13 @@
port@1 {
reg = <1>;
merger_in1: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
merger_out: endpoint {
remote-endpoint = <&etf_in>;
};
@@ -887,13 +1171,13 @@
};
funnel@fc31a000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0xfc31a000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -910,12 +1194,13 @@
port@5 {
reg = <5>;
funnel1_in5: endpoint {
- slave-mode;
remote-endpoint = <&kpss_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
};
@@ -924,46 +1209,44 @@
};
funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0xfc345000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
kpss_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
kpss_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
kpss_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
kpss_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
};
@@ -980,9 +1263,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&kpss_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&kpss_in0>;
+ };
};
};
};
@@ -996,9 +1281,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&kpss_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&kpss_in1>;
+ };
};
};
};
@@ -1012,9 +1299,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&kpss_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&kpss_in2>;
+ };
};
};
};
@@ -1028,10 +1317,230 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&kpss_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&kpss_in3>;
+ };
};
+ };
+ };
+
+ ocmem@fdd00000 {
+ compatible = "qcom,msm8974-ocmem";
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x180000>;
+ reg-names = "ctrl",
+ "mem";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+ clock-names = "core",
+ "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gmu_sram: gmu-sram@0 {
+ reg = <0x0 0x100000>;
+ };
+ };
+
+ bimc: interconnect@fc380000 {
+ reg = <0xfc380000 0x6a000>;
+ compatible = "qcom,msm8974-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ snoc: interconnect@fc460000 {
+ reg = <0xfc460000 0x4000>;
+ compatible = "qcom,msm8974-snoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
+ pnoc: interconnect@fc468000 {
+ reg = <0xfc468000 0x4000>;
+ compatible = "qcom,msm8974-pnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ ocmemnoc: interconnect@fc470000 {
+ reg = <0xfc470000 0x4000>;
+ compatible = "qcom,msm8974-ocmemnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+ };
+
+ mmssnoc: interconnect@fc478000 {
+ reg = <0xfc478000 0x4000>;
+ compatible = "qcom,msm8974-mmssnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&mmcc MMSS_S0_AXI_CLK>,
+ <&mmcc MMSS_S0_AXI_CLK>;
+ };
+
+ cnoc: interconnect@fc480000 {
+ reg = <0xfc480000 0x4000>;
+ compatible = "qcom,msm8974-cnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ };
+
+ mdss: mdss@fd900000 {
+ status = "disabled";
+
+ compatible = "qcom,mdss";
+ reg = <0xfd900000 0x100>,
+ <0xfd924000 0x1000>;
+ reg-names = "mdss_phys",
+ "vbif_phys";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdp: mdp@fd900000 {
+ status = "disabled";
+
+ compatible = "qcom,mdp5";
+ reg = <0xfd900100 0x22000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
+ interconnect-names = "mdp0-mem";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi0: dsi@fd922800 {
+ status = "disabled";
+
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0xfd922800 0x1f8>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+ <&mmcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi_phy0 0>,
+ <&dsi_phy0 1>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>,
+ <&mmcc MMSS_MISC_AHB_CLK>;
+ clock-names = "mdp_core",
+ "iface",
+ "bus",
+ "byte",
+ "pixel",
+ "core",
+ "core_mmss";
+
+ phys = <&dsi_phy0>;
+ phy-names = "dsi-phy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp5_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi_phy0: dsi-phy@fd922a00 {
+ status = "disabled";
+
+ compatible = "qcom,dsi-phy-28nm-hpm";
+ reg = <0xfd922a00 0xd4>,
+ <0xfd922b00 0x280>,
+ <0xfd922d80 0x30>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ qcom,dsi-phy-index = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+ clock-names = "iface", "ref";
+ };
+ };
+
+ imem@fe805000 {
+ status = "disabled";
+ compatible = "syscon", "simple-mfd";
+ reg = <0xfe805000 0x1000>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x65c>;
};
};
};
@@ -1039,22 +1548,8 @@
smd {
compatible = "qcom,smd";
- adsp {
- interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 8>;
- qcom,smd-edge = <1>;
- };
-
- modem {
- interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 12>;
- qcom,smd-edge = <0>;
- };
-
rpm {
- interrupts = <0 168 1>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
--
Gitblit v1.6.2