From 645e752c5a84baeb21015cdc85fc05b7d16312c8 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 01:13:52 +0000
Subject: [PATCH] disable i2c1
---
kernel/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi | 35 +++++++----------------------------
1 files changed, 7 insertions(+), 28 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/kernel/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
index 0093548..7d0468a 100644
--- a/kernel/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ b/kernel/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
@@ -1,8 +1,4 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0-only
/ {
gpio_keys {
@@ -83,7 +79,7 @@
};
&dss {
- status = "ok";
+ status = "okay";
vdds_dsi-supply = <&vpll2>;
vdda_video-supply = <&video_reg>;
pinctrl-names = "default";
@@ -108,34 +104,17 @@
regulator-max-microvolt = <3300000>;
};
- lcd0: display@0 {
- compatible = "panel-dpi";
- label = "28";
- status = "okay";
- /* default-on; */
+ lcd0: display {
+ /* This isn't the exact LCD, but the timings meet spec */
+ compatible = "logicpd,type28";
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_pin>;
- enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
+ backlight = <&bl>;
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
- };
-
- panel-timing {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <3>;
- hback-porch = <2>;
- hsync-len = <42>;
- vback-porch = <3>;
- vfront-porch = <2>;
- vsync-len = <11>;
- hsync-active = <1>;
- vsync-active = <1>;
- de-active = <1>;
- pixelclk-active = <0>;
};
};
--
Gitblit v1.6.2