From 61598093bbdd283a7edc367d900f223070ead8d2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:03 +0000
Subject: [PATCH] add ax88772C AX88772C_eeprom_tools
---
kernel/tools/testing/selftests/Makefile | 221 ++++++++++++++++++++++++++++++++++++++++---------------
1 files changed, 160 insertions(+), 61 deletions(-)
diff --git a/kernel/tools/testing/selftests/Makefile b/kernel/tools/testing/selftests/Makefile
index f0017c8..81fc7d1 100644
--- a/kernel/tools/testing/selftests/Makefile
+++ b/kernel/tools/testing/selftests/Makefile
@@ -1,35 +1,53 @@
# SPDX-License-Identifier: GPL-2.0
TARGETS = android
+TARGETS += arm64
TARGETS += bpf
TARGETS += breakpoints
TARGETS += capabilities
TARGETS += cgroup
+TARGETS += clone3
+TARGETS += core
TARGETS += cpufreq
TARGETS += cpu-hotplug
+TARGETS += damon
+TARGETS += drivers/dma-buf
TARGETS += efivarfs
TARGETS += exec
TARGETS += filesystems
+TARGETS += filesystems/binderfs
+TARGETS += filesystems/epoll
TARGETS += firmware
+TARGETS += fpu
TARGETS += ftrace
TARGETS += futex
TARGETS += gpio
TARGETS += intel_pstate
TARGETS += ipc
+TARGETS += ir
TARGETS += kcmp
+TARGETS += kexec
TARGETS += kvm
TARGETS += lib
+TARGETS += livepatch
+TARGETS += lkdtm
TARGETS += membarrier
TARGETS += memfd
TARGETS += memory-hotplug
+TARGETS += mincore
TARGETS += mount
TARGETS += mqueue
TARGETS += net
+TARGETS += net/forwarding
+TARGETS += net/mptcp
TARGETS += netfilter
TARGETS += nsfs
+TARGETS += pidfd
+TARGETS += pid_namespace
TARGETS += powerpc
TARGETS += proc
TARGETS += pstore
TARGETS += ptrace
+TARGETS += openat2
TARGETS += rseq
TARGETS += rtc
TARGETS += seccomp
@@ -40,9 +58,13 @@
TARGETS += static_keys
TARGETS += sync
TARGETS += sysctl
+TARGETS += tc-testing
+TARGETS += timens
ifneq (1, $(quicktest))
TARGETS += timers
endif
+TARGETS += tmpfs
+TARGETS += tpm2
TARGETS += user
TARGETS += vm
TARGETS += x86
@@ -54,114 +76,191 @@
TARGETS_HOTPLUG = cpu-hotplug
TARGETS_HOTPLUG += memory-hotplug
-# Clear LDFLAGS and MAKEFLAGS if called from main
-# Makefile to avoid test build failures when test
-# Makefile doesn't have explicit build rules.
-ifeq (1,$(MAKELEVEL))
+# User can optionally provide a TARGETS skiplist.
+SKIP_TARGETS ?=
+ifneq ($(SKIP_TARGETS),)
+ TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS))
+ override TARGETS := $(TMP)
+endif
+
+# User can set FORCE_TARGETS to 1 to require all targets to be successfully
+# built; make will fail if any of the targets cannot be built. If
+# FORCE_TARGETS is not set (the default), make will succeed if at least one
+# of the targets gets built.
+FORCE_TARGETS ?=
+
+# Clear LDFLAGS and MAKEFLAGS when implicit rules are missing. This provides
+# implicit rules to sub-test Makefiles which avoids build failures in test
+# Makefile that don't have explicit build rules.
+ifeq (,$(LINK.c))
override LDFLAGS =
override MAKEFLAGS =
endif
-ifneq ($(KBUILD_SRC),)
+# Append kselftest to KBUILD_OUTPUT and O to avoid cluttering
+# KBUILD_OUTPUT with selftest objects and headers installed
+# by selftests Makefile or lib.mk.
+ifdef building_out_of_srctree
override LDFLAGS =
endif
-BUILD := $(O)
-ifndef BUILD
- BUILD := $(KBUILD_OUTPUT)
-endif
-ifndef BUILD
- BUILD := $(shell pwd)
+top_srcdir ?= ../../..
+
+ifeq ("$(origin O)", "command line")
+ KBUILD_OUTPUT := $(O)
endif
-# KSFT_TAP_LEVEL is used from KSFT framework to prevent nested TAP header
-# printing from tests. Applicable to run_tests case where run_tests adds
-# TAP header prior running tests and when a test program invokes another
-# with system() call. Export it here to cover override RUN_TESTS defines.
-export KSFT_TAP_LEVEL=`echo 1`
+ifneq ($(KBUILD_OUTPUT),)
+ # Make's built-in functions such as $(abspath ...), $(realpath ...) cannot
+ # expand a shell special character '~'. We use a somewhat tedious way here.
+ abs_objtree := $(shell cd $(top_srcdir) && mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd)
+ $(if $(abs_objtree),, \
+ $(error failed to create output directory "$(KBUILD_OUTPUT)"))
+ # $(realpath ...) resolves symlinks
+ abs_objtree := $(realpath $(abs_objtree))
+ BUILD := $(abs_objtree)/kselftest
+else
+ BUILD := $(CURDIR)
+ DEFAULT_INSTALL_HDR_PATH := 1
+endif
+# Prepare for headers install
+include $(top_srcdir)/scripts/subarch.include
+ARCH ?= $(SUBARCH)
+export KSFT_KHDR_INSTALL_DONE := 1
export BUILD
-all:
- @for TARGET in $(TARGETS); do \
- BUILD_TARGET=$$BUILD/$$TARGET; \
- mkdir $$BUILD_TARGET -p; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET;\
- done;
+
+# build and run gpio when output directory is the src dir.
+# gpio has dependency on tools/gpio and builds tools/gpio
+# objects in the src directory in all cases making the src
+# repo dirty even when objects are relocated.
+ifneq (1,$(DEFAULT_INSTALL_HDR_PATH))
+ TMP := $(filter-out gpio, $(TARGETS))
+ TARGETS := $(TMP)
+endif
+
+# set default goal to all, so make without a target runs all, even when
+# all isn't the first target in the file.
+.DEFAULT_GOAL := all
+
+# Install headers here once for all tests. KSFT_KHDR_INSTALL_DONE
+# is used to avoid running headers_install from lib.mk.
+# Invoke headers install with --no-builtin-rules to avoid circular
+# dependency in "make kselftest" case. In this case, second level
+# make inherits builtin-rules which will use the rule generate
+# Makefile.o and runs into
+# "Circular Makefile.o <- prepare dependency dropped."
+# and headers_install fails and test compile fails.
+#
+# O= KBUILD_OUTPUT cases don't run into this error, since main Makefile
+# invokes them as sub-makes and --no-builtin-rules is not necessary,
+# but doesn't cause any failures. Keep it simple and use the same
+# flags in both cases.
+# Local build cases: "make kselftest", "make -C" - headers are installed
+# in the default INSTALL_HDR_PATH usr/include.
+khdr:
+ifeq (1,$(DEFAULT_INSTALL_HDR_PATH))
+ $(MAKE) --no-builtin-rules ARCH=$(ARCH) -C $(top_srcdir) headers_install
+else
+ $(MAKE) --no-builtin-rules INSTALL_HDR_PATH=$$BUILD/usr \
+ ARCH=$(ARCH) -C $(top_srcdir) headers_install
+endif
+
+all: khdr
+ @ret=1; \
+ for TARGET in $(TARGETS); do \
+ BUILD_TARGET=$$BUILD/$$TARGET; \
+ mkdir $$BUILD_TARGET -p; \
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET \
+ $(if $(FORCE_TARGETS),|| exit); \
+ ret=$$((ret * $$?)); \
+ done; exit $$ret;
run_tests: all
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
done;
hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
done;
run_hotplug: hotplug
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET run_full_test;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_full_test;\
done;
clean_hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
done;
run_pstore_crash:
- make -C pstore run_crash
+ $(MAKE) -C pstore run_crash
-INSTALL_PATH ?= install
-INSTALL_PATH := $(abspath $(INSTALL_PATH))
+# Use $BUILD as the default install root. $BUILD points to the
+# right output location for the following cases:
+# 1. output_dir=kernel_src
+# 2. a separate output directory is specified using O= KBUILD_OUTPUT
+# 3. a separate output directory is specified using KBUILD_OUTPUT
+# Avoid conflict with INSTALL_PATH set by the main Makefile
+#
+KSFT_INSTALL_PATH ?= $(BUILD)/kselftest_install
+KSFT_INSTALL_PATH := $(abspath $(KSFT_INSTALL_PATH))
+# Avoid changing the rest of the logic here and lib.mk.
+INSTALL_PATH := $(KSFT_INSTALL_PATH)
ALL_SCRIPT := $(INSTALL_PATH)/run_kselftest.sh
+TEST_LIST := $(INSTALL_PATH)/kselftest-list.txt
-install:
+install: all
ifdef INSTALL_PATH
@# Ask all targets to install their files
- mkdir -p $(INSTALL_PATH)
- @for TARGET in $(TARGETS); do \
- BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
- done;
-
- @# Ask all targets to emit their test scripts
- echo "#!/bin/sh" > $(ALL_SCRIPT)
- echo "BASE_DIR=\$$(realpath \$$(dirname \$$0))" >> $(ALL_SCRIPT)
- echo "cd \$$BASE_DIR" >> $(ALL_SCRIPT)
- echo "ROOT=\$$PWD" >> $(ALL_SCRIPT)
- echo "if [ \"\$$1\" = \"--summary\" ]; then" >> $(ALL_SCRIPT)
- echo " OUTPUT=\$$BASE_DIR/output.log" >> $(ALL_SCRIPT)
- echo " cat /dev/null > \$$OUTPUT" >> $(ALL_SCRIPT)
- echo "else" >> $(ALL_SCRIPT)
- echo " OUTPUT=/dev/stdout" >> $(ALL_SCRIPT)
- echo "fi" >> $(ALL_SCRIPT)
- echo "export KSFT_TAP_LEVEL=1" >> $(ALL_SCRIPT)
- echo "export skip=4" >> $(ALL_SCRIPT)
-
+ mkdir -p $(INSTALL_PATH)/kselftest
+ install -m 744 kselftest/module.sh $(INSTALL_PATH)/kselftest/
+ install -m 744 kselftest/runner.sh $(INSTALL_PATH)/kselftest/
+ install -m 744 kselftest/prefix.pl $(INSTALL_PATH)/kselftest/
+ install -m 744 run_kselftest.sh $(INSTALL_PATH)/
+ rm -f $(TEST_LIST)
+ @ret=1; \
for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- echo "echo ; echo TAP version 13" >> $(ALL_SCRIPT); \
- echo "echo Running tests in $$TARGET" >> $(ALL_SCRIPT); \
- echo "echo ========================================" >> $(ALL_SCRIPT); \
- echo "[ -w /dev/kmsg ] && echo \"kselftest: Running tests in $$TARGET\" >> /dev/kmsg" >> $(ALL_SCRIPT); \
- echo "cd $$TARGET" >> $(ALL_SCRIPT); \
- make -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
- echo "cd \$$ROOT" >> $(ALL_SCRIPT); \
- done;
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install \
+ $(if $(FORCE_TARGETS),|| exit); \
+ ret=$$((ret * $$?)); \
+ done; exit $$ret;
- chmod u+x $(ALL_SCRIPT)
+
+ @# Ask all targets to emit their test scripts
+ @# While building kselftest-list.text skip also non-existent TARGET dirs:
+ @# they could be the result of a build failure and should NOT be
+ @# included in the generated runlist.
+ for TARGET in $(TARGETS); do \
+ BUILD_TARGET=$$BUILD/$$TARGET; \
+ [ ! -d $(INSTALL_PATH)/$$TARGET ] && echo "Skipping non-existent dir: $$TARGET" && continue; \
+ echo -n "Emit Tests for $$TARGET\n"; \
+ $(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET COLLECTION=$$TARGET \
+ -C $$TARGET emit_tests >> $(TEST_LIST); \
+ done;
else
$(error Error: set INSTALL_PATH to use install)
endif
+FORMAT ?= .gz
+TAR_PATH = $(abspath ${INSTALL_PATH}/kselftest-packages/kselftest.tar${FORMAT})
+gen_tar: install
+ @mkdir -p ${INSTALL_PATH}/kselftest-packages/
+ @tar caf ${TAR_PATH} --exclude=kselftest-packages -C ${INSTALL_PATH} .
+ @echo "Created ${TAR_PATH}"
+
clean:
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
done;
-.PHONY: all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean
+.PHONY: khdr all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean gen_tar
--
Gitblit v1.6.2