From 61598093bbdd283a7edc367d900f223070ead8d2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:03 +0000
Subject: [PATCH] add ax88772C AX88772C_eeprom_tools
---
kernel/drivers/rtc/rtc-s35390a.c | 123 +++++++++++++++-------------------------
1 files changed, 47 insertions(+), 76 deletions(-)
diff --git a/kernel/drivers/rtc/rtc-s35390a.c b/kernel/drivers/rtc/rtc-s35390a.c
index 3c64dbb..03672a2 100644
--- a/kernel/drivers/rtc/rtc-s35390a.c
+++ b/kernel/drivers/rtc/rtc-s35390a.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Seiko Instruments S-35390A RTC Driver
*
* Copyright (c) 2007 Byron Bradley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
*/
#include <linux/module.h>
@@ -36,21 +32,22 @@
#define S35390A_ALRM_BYTE_MINS 2
/* flags for STATUS1 */
-#define S35390A_FLAG_POC 0x01
-#define S35390A_FLAG_BLD 0x02
-#define S35390A_FLAG_INT2 0x04
-#define S35390A_FLAG_24H 0x40
-#define S35390A_FLAG_RESET 0x80
+#define S35390A_FLAG_POC BIT(0)
+#define S35390A_FLAG_BLD BIT(1)
+#define S35390A_FLAG_INT2 BIT(2)
+#define S35390A_FLAG_24H BIT(6)
+#define S35390A_FLAG_RESET BIT(7)
/* flag for STATUS2 */
-#define S35390A_FLAG_TEST 0x01
+#define S35390A_FLAG_TEST BIT(0)
-#define S35390A_INT2_MODE_MASK 0xF0
-
+/* INT2 pin output mode */
+#define S35390A_INT2_MODE_MASK 0x0E
#define S35390A_INT2_MODE_NOINTR 0x00
-#define S35390A_INT2_MODE_FREQ 0x10
-#define S35390A_INT2_MODE_ALARM 0x40
-#define S35390A_INT2_MODE_PMIN_EDG 0x20
+#define S35390A_INT2_MODE_ALARM BIT(1) /* INT2AE */
+#define S35390A_INT2_MODE_PMIN_EDG BIT(2) /* INT2ME */
+#define S35390A_INT2_MODE_FREQ BIT(3) /* INT2FE */
+#define S35390A_INT2_MODE_PMIN (BIT(3) | BIT(2)) /* INT2FE | INT2ME */
static const struct i2c_device_id s35390a_id[] = {
{ "s35390a", 0 },
@@ -288,6 +285,9 @@
alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday,
alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday);
+ if (alm->time.tm_sec != 0)
+ dev_warn(&client->dev, "Alarms are only supported on a per minute basis!\n");
+
/* disable interrupt (which deasserts the irq line) */
err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
if (err < 0)
@@ -302,9 +302,6 @@
sts = S35390A_INT2_MODE_ALARM;
else
sts = S35390A_INT2_MODE_NOINTR;
-
- /* This chip expects the bits of each byte to be in reverse order */
- sts = bitrev8(sts);
/* set interupt mode*/
err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
@@ -343,7 +340,7 @@
if (err < 0)
return err;
- if ((bitrev8(sts) & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
+ if ((sts & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
/*
* When the alarm isn't enabled, the register to configure
* the alarm time isn't accessible.
@@ -426,8 +423,6 @@
.ioctl = s35390a_rtc_ioctl,
};
-static struct i2c_driver s35390a_driver;
-
static int s35390a_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -435,39 +430,38 @@
unsigned int i;
struct s35390a *s35390a;
char buf, status1;
+ struct device *dev = &client->dev;
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
- err = -ENODEV;
- goto exit;
- }
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENODEV;
- s35390a = devm_kzalloc(&client->dev, sizeof(struct s35390a),
- GFP_KERNEL);
- if (!s35390a) {
- err = -ENOMEM;
- goto exit;
- }
+ s35390a = devm_kzalloc(dev, sizeof(struct s35390a), GFP_KERNEL);
+ if (!s35390a)
+ return -ENOMEM;
s35390a->client[0] = client;
i2c_set_clientdata(client, s35390a);
/* This chip uses multiple addresses, use dummy devices for them */
for (i = 1; i < 8; ++i) {
- s35390a->client[i] = i2c_new_dummy(client->adapter,
- client->addr + i);
- if (!s35390a->client[i]) {
- dev_err(&client->dev, "Address %02x unavailable\n",
- client->addr + i);
- err = -EBUSY;
- goto exit_dummy;
+ s35390a->client[i] = devm_i2c_new_dummy_device(dev,
+ client->adapter,
+ client->addr + i);
+ if (IS_ERR(s35390a->client[i])) {
+ dev_err(dev, "Address %02x unavailable\n",
+ client->addr + i);
+ return PTR_ERR(s35390a->client[i]);
}
}
+ s35390a->rtc = devm_rtc_allocate_device(dev);
+ if (IS_ERR(s35390a->rtc))
+ return PTR_ERR(s35390a->rtc);
+
err_read = s35390a_read_status(s35390a, &status1);
if (err_read < 0) {
- err = err_read;
- dev_err(&client->dev, "error resetting chip\n");
- goto exit_dummy;
+ dev_err(dev, "error resetting chip\n");
+ return err_read;
}
if (status1 & S35390A_FLAG_24H)
@@ -480,52 +474,30 @@
buf = 0;
err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1);
if (err < 0) {
- dev_err(&client->dev, "error disabling alarm");
- goto exit_dummy;
+ dev_err(dev, "error disabling alarm");
+ return err;
}
} else {
err = s35390a_disable_test_mode(s35390a);
if (err < 0) {
- dev_err(&client->dev, "error disabling test mode\n");
- goto exit_dummy;
+ dev_err(dev, "error disabling test mode\n");
+ return err;
}
}
- device_set_wakeup_capable(&client->dev, 1);
+ device_set_wakeup_capable(dev, 1);
- s35390a->rtc = devm_rtc_device_register(&client->dev,
- s35390a_driver.driver.name,
- &s35390a_rtc_ops, THIS_MODULE);
+ s35390a->rtc->ops = &s35390a_rtc_ops;
+ s35390a->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ s35390a->rtc->range_max = RTC_TIMESTAMP_END_2099;
- if (IS_ERR(s35390a->rtc)) {
- err = PTR_ERR(s35390a->rtc);
- goto exit_dummy;
- }
+ /* supports per-minute alarms only, therefore set uie_unsupported */
+ s35390a->rtc->uie_unsupported = 1;
if (status1 & S35390A_FLAG_INT2)
rtc_update_irq(s35390a->rtc, 1, RTC_AF);
- return 0;
-
-exit_dummy:
- for (i = 1; i < 8; ++i)
- if (s35390a->client[i])
- i2c_unregister_device(s35390a->client[i]);
-
-exit:
- return err;
-}
-
-static int s35390a_remove(struct i2c_client *client)
-{
- unsigned int i;
- struct s35390a *s35390a = i2c_get_clientdata(client);
-
- for (i = 1; i < 8; ++i)
- if (s35390a->client[i])
- i2c_unregister_device(s35390a->client[i]);
-
- return 0;
+ return rtc_register_device(s35390a->rtc);
}
static struct i2c_driver s35390a_driver = {
@@ -534,7 +506,6 @@
.of_match_table = of_match_ptr(s35390a_of_match),
},
.probe = s35390a_probe,
- .remove = s35390a_remove,
.id_table = s35390a_id,
};
--
Gitblit v1.6.2