From 61598093bbdd283a7edc367d900f223070ead8d2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:03 +0000
Subject: [PATCH] add ax88772C AX88772C_eeprom_tools
---
kernel/drivers/rtc/rtc-rs5c348.c | 70 +++++++++++++++--------------------
1 files changed, 30 insertions(+), 40 deletions(-)
diff --git a/kernel/drivers/rtc/rtc-rs5c348.c b/kernel/drivers/rtc/rtc-rs5c348.c
index f2de8b1..47c1367 100644
--- a/kernel/drivers/rtc/rtc-rs5c348.c
+++ b/kernel/drivers/rtc/rtc-rs5c348.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* A SPI driver for the Ricoh RS5C348 RTC
*
* Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*
* The board specific init code should provide characteristics of this
* device:
@@ -66,6 +63,17 @@
u8 txbuf[5+7], *txp;
int ret;
+ ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
+ if (ret < 0)
+ return ret;
+ if (ret & RS5C348_BIT_XSTP) {
+ txbuf[0] = RS5C348_CMD_W(RS5C348_REG_CTL2);
+ txbuf[1] = 0;
+ ret = spi_write_then_read(spi, txbuf, 2, NULL, 0);
+ if (ret < 0)
+ return ret;
+ }
+
/* Transfer 5 bytes before writing SEC. This gives 31us for carry. */
txp = txbuf;
txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
@@ -101,6 +109,16 @@
struct rs5c348_plat_data *pdata = dev_get_platdata(&spi->dev);
u8 txbuf[5], rxbuf[7];
int ret;
+
+ ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
+ if (ret < 0)
+ return ret;
+ if (ret & RS5C348_BIT_VDET)
+ dev_warn(&spi->dev, "voltage-low detected.\n");
+ if (ret & RS5C348_BIT_XSTP) {
+ dev_warn(&spi->dev, "oscillator-stop detected.\n");
+ return -EINVAL;
+ }
/* Transfer 5 byte befores reading SEC. This gives 31us for carry. */
txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
@@ -143,8 +161,6 @@
.set_time = rs5c348_rtc_set_time,
};
-static struct spi_driver rs5c348_driver;
-
static int rs5c348_probe(struct spi_device *spi)
{
int ret;
@@ -161,53 +177,27 @@
ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_SECS));
if (ret < 0 || (ret & 0x80)) {
dev_err(&spi->dev, "not found.\n");
- goto kfree_exit;
+ return ret;
}
dev_info(&spi->dev, "spiclk %u KHz.\n",
(spi->max_speed_hz + 500) / 1000);
- /* turn RTC on if it was not on */
- ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
- if (ret < 0)
- goto kfree_exit;
- if (ret & (RS5C348_BIT_XSTP | RS5C348_BIT_VDET)) {
- u8 buf[2];
- struct rtc_time tm;
- if (ret & RS5C348_BIT_VDET)
- dev_warn(&spi->dev, "voltage-low detected.\n");
- if (ret & RS5C348_BIT_XSTP)
- dev_warn(&spi->dev, "oscillator-stop detected.\n");
- rtc_time_to_tm(0, &tm); /* 1970/1/1 */
- ret = rs5c348_rtc_set_time(&spi->dev, &tm);
- if (ret < 0)
- goto kfree_exit;
- buf[0] = RS5C348_CMD_W(RS5C348_REG_CTL2);
- buf[1] = 0;
- ret = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
- if (ret < 0)
- goto kfree_exit;
- }
-
ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL1));
if (ret < 0)
- goto kfree_exit;
+ return ret;
if (ret & RS5C348_BIT_24H)
pdata->rtc_24h = 1;
- rtc = devm_rtc_device_register(&spi->dev, rs5c348_driver.driver.name,
- &rs5c348_rtc_ops, THIS_MODULE);
-
- if (IS_ERR(rtc)) {
- ret = PTR_ERR(rtc);
- goto kfree_exit;
- }
+ rtc = devm_rtc_allocate_device(&spi->dev);
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
pdata->rtc = rtc;
- return 0;
- kfree_exit:
- return ret;
+ rtc->ops = &rs5c348_rtc_ops;
+
+ return rtc_register_device(rtc);
}
static struct spi_driver rs5c348_driver = {
--
Gitblit v1.6.2