From 61598093bbdd283a7edc367d900f223070ead8d2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:03 +0000
Subject: [PATCH] add ax88772C AX88772C_eeprom_tools
---
kernel/drivers/rtc/rtc-cmos.c | 582 ++++++++++++++++++++++++++++++++-------------------------
1 files changed, 328 insertions(+), 254 deletions(-)
diff --git a/kernel/drivers/rtc/rtc-cmos.c b/kernel/drivers/rtc/rtc-cmos.c
index 8545f0d..7f56093 100644
--- a/kernel/drivers/rtc/rtc-cmos.c
+++ b/kernel/drivers/rtc/rtc-cmos.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* RTC class driver for "CMOS RTC": PCs, ACPI, etc
*
* Copyright (C) 1996 Paul Gortmaker (drivers/char/rtc.c)
* Copyright (C) 2006 David Brownell (convert to new framework)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
*/
/*
@@ -226,6 +222,8 @@
static int cmos_read_time(struct device *dev, struct rtc_time *t)
{
+ int ret;
+
/*
* If pm_trace abused the RTC for storage, set the timespec to 0,
* which tells the caller that this RTC value is unusable.
@@ -233,29 +231,64 @@
if (!pm_trace_rtc_valid())
return -EIO;
- /* REVISIT: if the clock has a "century" register, use
- * that instead of the heuristic in mc146818_get_time().
- * That'll make Y3K compatility (year > 2070) easy!
- */
- mc146818_get_time(t);
+ ret = mc146818_get_time(t);
+ if (ret < 0) {
+ dev_err_ratelimited(dev, "unable to read current time\n");
+ return ret;
+ }
+
return 0;
}
static int cmos_set_time(struct device *dev, struct rtc_time *t)
{
- /* REVISIT: set the "century" register if available
- *
- * NOTE: this ignores the issue whereby updating the seconds
+ /* NOTE: this ignores the issue whereby updating the seconds
* takes effect exactly 500ms after we write the register.
* (Also queueing and other delays before we get this far.)
*/
return mc146818_set_time(t);
}
+struct cmos_read_alarm_callback_param {
+ struct cmos_rtc *cmos;
+ struct rtc_time *time;
+ unsigned char rtc_control;
+};
+
+static void cmos_read_alarm_callback(unsigned char __always_unused seconds,
+ void *param_in)
+{
+ struct cmos_read_alarm_callback_param *p =
+ (struct cmos_read_alarm_callback_param *)param_in;
+ struct rtc_time *time = p->time;
+
+ time->tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
+ time->tm_min = CMOS_READ(RTC_MINUTES_ALARM);
+ time->tm_hour = CMOS_READ(RTC_HOURS_ALARM);
+
+ if (p->cmos->day_alrm) {
+ /* ignore upper bits on readback per ACPI spec */
+ time->tm_mday = CMOS_READ(p->cmos->day_alrm) & 0x3f;
+ if (!time->tm_mday)
+ time->tm_mday = -1;
+
+ if (p->cmos->mon_alrm) {
+ time->tm_mon = CMOS_READ(p->cmos->mon_alrm);
+ if (!time->tm_mon)
+ time->tm_mon = -1;
+ }
+ }
+
+ p->rtc_control = CMOS_READ(RTC_CONTROL);
+}
+
static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
- unsigned char rtc_control;
+ struct cmos_read_alarm_callback_param p = {
+ .cmos = cmos,
+ .time = &t->time,
+ };
/* This not only a rtc_op, but also called directly */
if (!is_valid_irq(cmos->irq))
@@ -266,28 +299,18 @@
* the future.
*/
- spin_lock_irq(&rtc_lock);
- t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
- t->time.tm_min = CMOS_READ(RTC_MINUTES_ALARM);
- t->time.tm_hour = CMOS_READ(RTC_HOURS_ALARM);
+ /* Some Intel chipsets disconnect the alarm registers when the clock
+ * update is in progress - during this time reads return bogus values
+ * and writes may fail silently. See for example "7th Generation Intel®
+ * Processor Family I/O for U/Y Platforms [...] Datasheet", section
+ * 27.7.1
+ *
+ * Use the mc146818_avoid_UIP() function to avoid this.
+ */
+ if (!mc146818_avoid_UIP(cmos_read_alarm_callback, &p))
+ return -EIO;
- if (cmos->day_alrm) {
- /* ignore upper bits on readback per ACPI spec */
- t->time.tm_mday = CMOS_READ(cmos->day_alrm) & 0x3f;
- if (!t->time.tm_mday)
- t->time.tm_mday = -1;
-
- if (cmos->mon_alrm) {
- t->time.tm_mon = CMOS_READ(cmos->mon_alrm);
- if (!t->time.tm_mon)
- t->time.tm_mon = -1;
- }
- }
-
- rtc_control = CMOS_READ(RTC_CONTROL);
- spin_unlock_irq(&rtc_lock);
-
- if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ if (!(p.rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
if (((unsigned)t->time.tm_sec) < 0x60)
t->time.tm_sec = bcd2bin(t->time.tm_sec);
else
@@ -316,7 +339,7 @@
}
}
- t->enabled = !!(rtc_control & RTC_AIE);
+ t->enabled = !!(p.rtc_control & RTC_AIE);
t->pending = 0;
return 0;
@@ -447,10 +470,57 @@
return 0;
}
+struct cmos_set_alarm_callback_param {
+ struct cmos_rtc *cmos;
+ unsigned char mon, mday, hrs, min, sec;
+ struct rtc_wkalrm *t;
+};
+
+/* Note: this function may be executed by mc146818_avoid_UIP() more then
+ * once
+ */
+static void cmos_set_alarm_callback(unsigned char __always_unused seconds,
+ void *param_in)
+{
+ struct cmos_set_alarm_callback_param *p =
+ (struct cmos_set_alarm_callback_param *)param_in;
+
+ /* next rtc irq must not be from previous alarm setting */
+ cmos_irq_disable(p->cmos, RTC_AIE);
+
+ /* update alarm */
+ CMOS_WRITE(p->hrs, RTC_HOURS_ALARM);
+ CMOS_WRITE(p->min, RTC_MINUTES_ALARM);
+ CMOS_WRITE(p->sec, RTC_SECONDS_ALARM);
+
+ /* the system may support an "enhanced" alarm */
+ if (p->cmos->day_alrm) {
+ CMOS_WRITE(p->mday, p->cmos->day_alrm);
+ if (p->cmos->mon_alrm)
+ CMOS_WRITE(p->mon, p->cmos->mon_alrm);
+ }
+
+ if (use_hpet_alarm()) {
+ /*
+ * FIXME the HPET alarm glue currently ignores day_alrm
+ * and mon_alrm ...
+ */
+ hpet_set_alarm_time(p->t->time.tm_hour, p->t->time.tm_min,
+ p->t->time.tm_sec);
+ }
+
+ if (p->t->enabled)
+ cmos_irq_enable(p->cmos, RTC_AIE);
+}
+
static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
- unsigned char mon, mday, hrs, min, sec, rtc_control;
+ struct cmos_set_alarm_callback_param p = {
+ .cmos = cmos,
+ .t = t
+ };
+ unsigned char rtc_control;
int ret;
/* This not only a rtc_op, but also called directly */
@@ -461,11 +531,11 @@
if (ret < 0)
return ret;
- mon = t->time.tm_mon + 1;
- mday = t->time.tm_mday;
- hrs = t->time.tm_hour;
- min = t->time.tm_min;
- sec = t->time.tm_sec;
+ p.mon = t->time.tm_mon + 1;
+ p.mday = t->time.tm_mday;
+ p.hrs = t->time.tm_hour;
+ p.min = t->time.tm_min;
+ p.sec = t->time.tm_sec;
spin_lock_irq(&rtc_lock);
rtc_control = CMOS_READ(RTC_CONTROL);
@@ -473,43 +543,21 @@
if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
/* Writing 0xff means "don't care" or "match all". */
- mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
- mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
- hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
- min = (min < 60) ? bin2bcd(min) : 0xff;
- sec = (sec < 60) ? bin2bcd(sec) : 0xff;
+ p.mon = (p.mon <= 12) ? bin2bcd(p.mon) : 0xff;
+ p.mday = (p.mday >= 1 && p.mday <= 31) ? bin2bcd(p.mday) : 0xff;
+ p.hrs = (p.hrs < 24) ? bin2bcd(p.hrs) : 0xff;
+ p.min = (p.min < 60) ? bin2bcd(p.min) : 0xff;
+ p.sec = (p.sec < 60) ? bin2bcd(p.sec) : 0xff;
}
- spin_lock_irq(&rtc_lock);
-
- /* next rtc irq must not be from previous alarm setting */
- cmos_irq_disable(cmos, RTC_AIE);
-
- /* update alarm */
- CMOS_WRITE(hrs, RTC_HOURS_ALARM);
- CMOS_WRITE(min, RTC_MINUTES_ALARM);
- CMOS_WRITE(sec, RTC_SECONDS_ALARM);
-
- /* the system may support an "enhanced" alarm */
- if (cmos->day_alrm) {
- CMOS_WRITE(mday, cmos->day_alrm);
- if (cmos->mon_alrm)
- CMOS_WRITE(mon, cmos->mon_alrm);
- }
-
- if (use_hpet_alarm()) {
- /*
- * FIXME the HPET alarm glue currently ignores day_alrm
- * and mon_alrm ...
- */
- hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min,
- t->time.tm_sec);
- }
-
- if (t->enabled)
- cmos_irq_enable(cmos, RTC_AIE);
-
- spin_unlock_irq(&rtc_lock);
+ /*
+ * Some Intel chipsets disconnect the alarm registers when the clock
+ * update is in progress - during this time writes fail silently.
+ *
+ * Use mc146818_avoid_UIP() to avoid this.
+ */
+ if (!mc146818_avoid_UIP(cmos_set_alarm_callback, &p))
+ return -EIO;
cmos->alarm_expires = rtc_tm_to_time64(&t->time);
@@ -702,6 +750,168 @@
return IRQ_NONE;
}
+#ifdef CONFIG_ACPI
+
+#include <linux/acpi.h>
+
+static u32 rtc_handler(void *context)
+{
+ struct device *dev = context;
+ struct cmos_rtc *cmos = dev_get_drvdata(dev);
+ unsigned char rtc_control = 0;
+ unsigned char rtc_intr;
+ unsigned long flags;
+
+
+ /*
+ * Always update rtc irq when ACPI is used as RTC Alarm.
+ * Or else, ACPI SCI is enabled during suspend/resume only,
+ * update rtc irq in that case.
+ */
+ if (cmos_use_acpi_alarm())
+ cmos_interrupt(0, (void *)cmos->rtc);
+ else {
+ /* Fix me: can we use cmos_interrupt() here as well? */
+ spin_lock_irqsave(&rtc_lock, flags);
+ if (cmos_rtc.suspend_ctrl)
+ rtc_control = CMOS_READ(RTC_CONTROL);
+ if (rtc_control & RTC_AIE) {
+ cmos_rtc.suspend_ctrl &= ~RTC_AIE;
+ CMOS_WRITE(rtc_control, RTC_CONTROL);
+ rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
+ rtc_update_irq(cmos->rtc, 1, rtc_intr);
+ }
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ }
+
+ pm_wakeup_hard_event(dev);
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
+ return ACPI_INTERRUPT_HANDLED;
+}
+
+static void acpi_rtc_event_setup(struct device *dev)
+{
+ if (acpi_disabled)
+ return;
+
+ acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
+ /*
+ * After the RTC handler is installed, the Fixed_RTC event should
+ * be disabled. Only when the RTC alarm is set will it be enabled.
+ */
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
+}
+
+static void acpi_rtc_event_cleanup(void)
+{
+ if (acpi_disabled)
+ return;
+
+ acpi_remove_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler);
+}
+
+static void rtc_wake_on(struct device *dev)
+{
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_enable_event(ACPI_EVENT_RTC, 0);
+}
+
+static void rtc_wake_off(struct device *dev)
+{
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
+}
+
+#ifdef CONFIG_X86
+/* Enable use_acpi_alarm mode for Intel platforms no earlier than 2015 */
+static void use_acpi_alarm_quirks(void)
+{
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+ return;
+
+ if (!is_hpet_enabled())
+ return;
+
+ if (dmi_get_bios_year() < 2015)
+ return;
+
+ use_acpi_alarm = true;
+}
+#else
+static inline void use_acpi_alarm_quirks(void) { }
+#endif
+
+static void acpi_cmos_wake_setup(struct device *dev)
+{
+ if (acpi_disabled)
+ return;
+
+ use_acpi_alarm_quirks();
+
+ cmos_rtc.wake_on = rtc_wake_on;
+ cmos_rtc.wake_off = rtc_wake_off;
+
+ /* ACPI tables bug workaround. */
+ if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
+ dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
+ acpi_gbl_FADT.month_alarm);
+ acpi_gbl_FADT.month_alarm = 0;
+ }
+
+ cmos_rtc.day_alrm = acpi_gbl_FADT.day_alarm;
+ cmos_rtc.mon_alrm = acpi_gbl_FADT.month_alarm;
+ cmos_rtc.century = acpi_gbl_FADT.century;
+
+ if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
+ dev_info(dev, "RTC can wake from S4\n");
+
+ /* RTC always wakes from S1/S2/S3, and often S4/STD */
+ device_init_wakeup(dev, 1);
+}
+
+static void cmos_check_acpi_rtc_status(struct device *dev,
+ unsigned char *rtc_control)
+{
+ struct cmos_rtc *cmos = dev_get_drvdata(dev);
+ acpi_event_status rtc_status;
+ acpi_status status;
+
+ if (acpi_gbl_FADT.flags & ACPI_FADT_FIXED_RTC)
+ return;
+
+ status = acpi_get_event_status(ACPI_EVENT_RTC, &rtc_status);
+ if (ACPI_FAILURE(status)) {
+ dev_err(dev, "Could not get RTC status\n");
+ } else if (rtc_status & ACPI_EVENT_FLAG_SET) {
+ unsigned char mask;
+ *rtc_control &= ~RTC_AIE;
+ CMOS_WRITE(*rtc_control, RTC_CONTROL);
+ mask = CMOS_READ(RTC_INTR_FLAGS);
+ rtc_update_irq(cmos->rtc, 1, mask);
+ }
+}
+
+#else /* !CONFIG_ACPI */
+
+static inline void acpi_rtc_event_setup(struct device *dev)
+{
+}
+
+static inline void acpi_rtc_event_cleanup(void)
+{
+}
+
+static inline void acpi_cmos_wake_setup(struct device *dev)
+{
+}
+
+static inline void cmos_check_acpi_rtc_status(struct device *dev,
+ unsigned char *rtc_control)
+{
+}
+#endif /* CONFIG_ACPI */
+
#ifdef CONFIG_PNP
#define INITSECTION
@@ -785,18 +995,26 @@
if (info->address_space)
address_space = info->address_space;
- if (info->rtc_day_alarm && info->rtc_day_alarm < 128)
- cmos_rtc.day_alrm = info->rtc_day_alarm;
- if (info->rtc_mon_alarm && info->rtc_mon_alarm < 128)
- cmos_rtc.mon_alrm = info->rtc_mon_alarm;
- if (info->rtc_century && info->rtc_century < 128)
- cmos_rtc.century = info->rtc_century;
+ cmos_rtc.day_alrm = info->rtc_day_alarm;
+ cmos_rtc.mon_alrm = info->rtc_mon_alarm;
+ cmos_rtc.century = info->rtc_century;
if (info->wake_on && info->wake_off) {
cmos_rtc.wake_on = info->wake_on;
cmos_rtc.wake_off = info->wake_off;
}
+ } else {
+ acpi_cmos_wake_setup(dev);
}
+
+ if (cmos_rtc.day_alrm >= 128)
+ cmos_rtc.day_alrm = 0;
+
+ if (cmos_rtc.mon_alrm >= 128)
+ cmos_rtc.mon_alrm = 0;
+
+ if (cmos_rtc.century >= 128)
+ cmos_rtc.century = 0;
cmos_rtc.dev = dev;
dev_set_drvdata(dev, &cmos_rtc);
@@ -808,6 +1026,12 @@
}
rename_region(ports, dev_name(&cmos_rtc.rtc->dev));
+
+ if (!mc146818_does_rtc_work()) {
+ dev_warn(dev, "broken or not accessible\n");
+ retval = -ENXIO;
+ goto cleanup1;
+ }
spin_lock_irq(&rtc_lock);
@@ -879,6 +1103,13 @@
if (rtc_nvmem_register(cmos_rtc.rtc, &nvmem_cfg))
dev_err(dev, "nvmem registration failed\n");
+ /*
+ * Everything has gone well so far, so by default register a handler for
+ * the ACPI RTC fixed event.
+ */
+ if (!info)
+ acpi_rtc_event_setup(dev);
+
dev_info(dev, "%s%s, %d bytes nvram%s\n",
!is_valid_irq(rtc_irq) ? "no alarms" :
cmos_rtc.mon_alrm ? "alarms up to one year" :
@@ -923,6 +1154,9 @@
if (use_hpet_alarm())
hpet_unregister_irq_handler(cmos_interrupt);
}
+
+ if (!dev_get_platdata(dev))
+ acpi_rtc_event_cleanup();
cmos->rtc = NULL;
@@ -1012,6 +1246,7 @@
enable_irq_wake(cmos->irq);
}
+ memset(&cmos->saved_wkalrm, 0, sizeof(struct rtc_wkalrm));
cmos_read_alarm(dev, &cmos->saved_wkalrm);
dev_dbg(dev, "suspend%s, ctrl %02x\n",
@@ -1056,10 +1291,13 @@
* ACK the rtc irq here
*/
if (t_now >= cmos->alarm_expires && cmos_use_acpi_alarm()) {
+ local_irq_disable();
cmos_interrupt(0, (void *)cmos->rtc);
+ local_irq_enable();
return;
}
+ memset(¤t_alarm, 0, sizeof(struct rtc_wkalrm));
cmos_read_alarm(dev, ¤t_alarm);
t_current_expires = rtc_tm_to_time64(¤t_alarm.time);
t_saved_expires = rtc_tm_to_time64(&cmos->saved_wkalrm.time);
@@ -1068,9 +1306,6 @@
cmos_set_alarm(dev, &cmos->saved_wkalrm);
}
}
-
-static void cmos_check_acpi_rtc_status(struct device *dev,
- unsigned char *rtc_control);
static int __maybe_unused cmos_resume(struct device *dev)
{
@@ -1138,189 +1373,29 @@
* predate even PNPBIOS should set up platform_bus devices.
*/
-#ifdef CONFIG_ACPI
-
-#include <linux/acpi.h>
-
-static u32 rtc_handler(void *context)
-{
- struct device *dev = context;
- struct cmos_rtc *cmos = dev_get_drvdata(dev);
- unsigned char rtc_control = 0;
- unsigned char rtc_intr;
- unsigned long flags;
-
-
- /*
- * Always update rtc irq when ACPI is used as RTC Alarm.
- * Or else, ACPI SCI is enabled during suspend/resume only,
- * update rtc irq in that case.
- */
- if (cmos_use_acpi_alarm())
- cmos_interrupt(0, (void *)cmos->rtc);
- else {
- /* Fix me: can we use cmos_interrupt() here as well? */
- spin_lock_irqsave(&rtc_lock, flags);
- if (cmos_rtc.suspend_ctrl)
- rtc_control = CMOS_READ(RTC_CONTROL);
- if (rtc_control & RTC_AIE) {
- cmos_rtc.suspend_ctrl &= ~RTC_AIE;
- CMOS_WRITE(rtc_control, RTC_CONTROL);
- rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
- rtc_update_irq(cmos->rtc, 1, rtc_intr);
- }
- spin_unlock_irqrestore(&rtc_lock, flags);
- }
-
- pm_wakeup_hard_event(dev);
- acpi_clear_event(ACPI_EVENT_RTC);
- acpi_disable_event(ACPI_EVENT_RTC, 0);
- return ACPI_INTERRUPT_HANDLED;
-}
-
-static inline void rtc_wake_setup(struct device *dev)
-{
- acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
- /*
- * After the RTC handler is installed, the Fixed_RTC event should
- * be disabled. Only when the RTC alarm is set will it be enabled.
- */
- acpi_clear_event(ACPI_EVENT_RTC);
- acpi_disable_event(ACPI_EVENT_RTC, 0);
-}
-
-static void rtc_wake_on(struct device *dev)
-{
- acpi_clear_event(ACPI_EVENT_RTC);
- acpi_enable_event(ACPI_EVENT_RTC, 0);
-}
-
-static void rtc_wake_off(struct device *dev)
-{
- acpi_disable_event(ACPI_EVENT_RTC, 0);
-}
-
-#ifdef CONFIG_X86
-/* Enable use_acpi_alarm mode for Intel platforms no earlier than 2015 */
-static void use_acpi_alarm_quirks(void)
-{
- int year;
-
- if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
- return;
-
- if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
- return;
-
- if (!is_hpet_enabled())
- return;
-
- if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year >= 2015)
- use_acpi_alarm = true;
-}
-#else
-static inline void use_acpi_alarm_quirks(void) { }
-#endif
-
-/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find
- * its device node and pass extra config data. This helps its driver use
- * capabilities that the now-obsolete mc146818 didn't have, and informs it
- * that this board's RTC is wakeup-capable (per ACPI spec).
- */
-static struct cmos_rtc_board_info acpi_rtc_info;
-
-static void cmos_wake_setup(struct device *dev)
-{
- if (acpi_disabled)
- return;
-
- use_acpi_alarm_quirks();
-
- rtc_wake_setup(dev);
- acpi_rtc_info.wake_on = rtc_wake_on;
- acpi_rtc_info.wake_off = rtc_wake_off;
-
- /* workaround bug in some ACPI tables */
- if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
- dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
- acpi_gbl_FADT.month_alarm);
- acpi_gbl_FADT.month_alarm = 0;
- }
-
- acpi_rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
- acpi_rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
- acpi_rtc_info.rtc_century = acpi_gbl_FADT.century;
-
- /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */
- if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
- dev_info(dev, "RTC can wake from S4\n");
-
- dev->platform_data = &acpi_rtc_info;
-
- /* RTC always wakes from S1/S2/S3, and often S4/STD */
- device_init_wakeup(dev, 1);
-}
-
-static void cmos_check_acpi_rtc_status(struct device *dev,
- unsigned char *rtc_control)
-{
- struct cmos_rtc *cmos = dev_get_drvdata(dev);
- acpi_event_status rtc_status;
- acpi_status status;
-
- if (acpi_gbl_FADT.flags & ACPI_FADT_FIXED_RTC)
- return;
-
- status = acpi_get_event_status(ACPI_EVENT_RTC, &rtc_status);
- if (ACPI_FAILURE(status)) {
- dev_err(dev, "Could not get RTC status\n");
- } else if (rtc_status & ACPI_EVENT_FLAG_SET) {
- unsigned char mask;
- *rtc_control &= ~RTC_AIE;
- CMOS_WRITE(*rtc_control, RTC_CONTROL);
- mask = CMOS_READ(RTC_INTR_FLAGS);
- rtc_update_irq(cmos->rtc, 1, mask);
- }
-}
-
-#else
-
-static void cmos_wake_setup(struct device *dev)
-{
-}
-
-static void cmos_check_acpi_rtc_status(struct device *dev,
- unsigned char *rtc_control)
-{
-}
-
-#endif
-
#ifdef CONFIG_PNP
#include <linux/pnp.h>
static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
- cmos_wake_setup(&pnp->dev);
+ int irq;
if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
- unsigned int irq = 0;
+ irq = 0;
#ifdef CONFIG_X86
/* Some machines contain a PNP entry for the RTC, but
* don't define the IRQ. It should always be safe to
* hardcode it on systems with a legacy PIC.
*/
if (nr_legacy_irqs())
- irq = 8;
+ irq = RTC_IRQ;
#endif
- return cmos_do_probe(&pnp->dev,
- pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
} else {
- return cmos_do_probe(&pnp->dev,
- pnp_get_resource(pnp, IORESOURCE_IO, 0),
- pnp_irq(pnp, 0));
+ irq = pnp_irq(pnp, 0);
}
+
+ return cmos_do_probe(&pnp->dev, pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
}
static void cmos_pnp_remove(struct pnp_dev *pnp)
@@ -1352,7 +1427,7 @@
MODULE_DEVICE_TABLE(pnp, rtc_ids);
static struct pnp_driver cmos_pnp_driver = {
- .name = (char *) driver_name,
+ .name = driver_name,
.id_table = rtc_ids,
.probe = cmos_pnp_probe,
.remove = cmos_pnp_remove,
@@ -1407,7 +1482,6 @@
int irq;
cmos_of_init(pdev);
- cmos_wake_setup(&pdev->dev);
if (RTC_IOMAPPED)
resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
--
Gitblit v1.6.2