From 61598093bbdd283a7edc367d900f223070ead8d2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:03 +0000
Subject: [PATCH] add ax88772C AX88772C_eeprom_tools
---
kernel/drivers/i2c/busses/i2c-s3c2410.c | 74 ++++++++-----------------------------
1 files changed, 16 insertions(+), 58 deletions(-)
diff --git a/kernel/drivers/i2c/busses/i2c-s3c2410.c b/kernel/drivers/i2c/busses/i2c-s3c2410.c
index 4c60369..0583184 100644
--- a/kernel/drivers/i2c/busses/i2c-s3c2410.c
+++ b/kernel/drivers/i2c/busses/i2c-s3c2410.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/* linux/drivers/i2c/busses/i2c-s3c2410.c
*
* Copyright (C) 2004,2005,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 I2C Controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/kernel.h>
@@ -33,7 +24,7 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
@@ -104,7 +95,6 @@
struct s3c24xx_i2c {
wait_queue_head_t wait;
kernel_ulong_t quirks;
- unsigned int suspended:1;
struct i2c_msg *msg;
unsigned int msg_num;
@@ -123,7 +113,7 @@
struct i2c_adapter adap;
struct s3c2410_platform_i2c *pdata;
- int gpios[2];
+ struct gpio_desc *gpios[2];
struct pinctrl *pctrl;
#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
struct notifier_block freq_transition;
@@ -445,7 +435,7 @@
* fall through to the write state, as we will need to
* send a byte as well
*/
-
+ fallthrough;
case STATE_WRITE:
/*
* we are writing data to the device... check for the
@@ -706,9 +696,6 @@
unsigned long timeout;
int ret;
- if (i2c->suspended)
- return -EIO;
-
ret = s3c24xx_i2c_set_master(i2c);
if (ret != 0) {
dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
@@ -850,11 +837,11 @@
int freq;
i2c->clkrate = clkin;
- clkin /= 1000; /* clkin now in KHz */
+ clkin /= 1000; /* clkin now in KHz */
dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
- target_frequency = pdata->frequency ? pdata->frequency : 100000;
+ target_frequency = pdata->frequency ?: I2C_MAX_STANDARD_MODE_FREQ;
target_frequency /= 1000; /* Target frequency now in KHz */
@@ -963,52 +950,26 @@
#ifdef CONFIG_OF
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
{
- int idx, gpio, ret;
+ int i;
if (i2c->quirks & QUIRK_NO_GPIO)
return 0;
- for (idx = 0; idx < 2; idx++) {
- gpio = of_get_gpio(i2c->dev->of_node, idx);
- if (!gpio_is_valid(gpio)) {
- dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
- goto free_gpio;
- }
- i2c->gpios[idx] = gpio;
-
- ret = gpio_request(gpio, "i2c-bus");
- if (ret) {
- dev_err(i2c->dev, "gpio [%d] request failed (%d)\n",
- gpio, ret);
- goto free_gpio;
+ for (i = 0; i < 2; i++) {
+ i2c->gpios[i] = devm_gpiod_get_index(i2c->dev, NULL,
+ i, GPIOD_ASIS);
+ if (IS_ERR(i2c->gpios[i])) {
+ dev_err(i2c->dev, "i2c gpio invalid at index %d\n", i);
+ return -EINVAL;
}
}
return 0;
-
-free_gpio:
- while (--idx >= 0)
- gpio_free(i2c->gpios[idx]);
- return -EINVAL;
}
-static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
-{
- unsigned int idx;
-
- if (i2c->quirks & QUIRK_NO_GPIO)
- return;
-
- for (idx = 0; idx < 2; idx++)
- gpio_free(i2c->gpios[idx]);
-}
#else
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
{
return 0;
-}
-
-static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
-{
}
#endif
@@ -1238,9 +1199,6 @@
i2c_del_adapter(&i2c->adap);
- if (pdev->dev.of_node && IS_ERR(i2c->pctrl))
- s3c24xx_i2c_dt_gpio_free(i2c);
-
return 0;
}
@@ -1249,7 +1207,7 @@
{
struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
- i2c->suspended = 1;
+ i2c_mark_adapter_suspended(&i2c->adap);
if (!IS_ERR(i2c->sysreg))
regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg);
@@ -1270,7 +1228,7 @@
return ret;
s3c24xx_i2c_init(i2c);
clk_disable(i2c->clk);
- i2c->suspended = 0;
+ i2c_mark_adapter_resumed(&i2c->adap);
return 0;
}
@@ -1311,5 +1269,5 @@
module_exit(i2c_adap_s3c_exit);
MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");
--
Gitblit v1.6.2