From 61598093bbdd283a7edc367d900f223070ead8d2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:03 +0000
Subject: [PATCH] add ax88772C AX88772C_eeprom_tools
---
kernel/drivers/clk/qcom/gdsc.c | 166 +++++++++++++++++++++++++++++++++++++++++++++----------
1 files changed, 136 insertions(+), 30 deletions(-)
diff --git a/kernel/drivers/clk/qcom/gdsc.c b/kernel/drivers/clk/qcom/gdsc.c
index a077133..cf23cfd 100644
--- a/kernel/drivers/clk/qcom/gdsc.c
+++ b/kernel/drivers/clk/qcom/gdsc.c
@@ -1,24 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2015, 2017-2018, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Copyright (c) 2015, 2017-2018, 2022, The Linux Foundation. All rights reserved.
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/ktime.h>
#include <linux/pm_domain.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
#include "gdsc.h"
@@ -36,12 +30,18 @@
/* CFG_GDSCR */
#define GDSC_POWER_UP_COMPLETE BIT(16)
#define GDSC_POWER_DOWN_COMPLETE BIT(15)
+#define GDSC_RETAIN_FF_ENABLE BIT(11)
#define CFG_GDSCR_OFFSET 0x4
/* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */
-#define EN_REST_WAIT_VAL (0x2 << 20)
-#define EN_FEW_WAIT_VAL (0x8 << 16)
-#define CLK_DIS_WAIT_VAL (0x2 << 12)
+#define EN_REST_WAIT_VAL 0x2
+#define EN_FEW_WAIT_VAL 0x8
+#define CLK_DIS_WAIT_VAL 0x2
+
+/* Transition delay shifts */
+#define EN_REST_WAIT_SHIFT 20
+#define EN_FEW_WAIT_SHIFT 16
+#define CLK_DIS_WAIT_SHIFT 12
#define RETAIN_MEM BIT(14)
#define RETAIN_PERIPH BIT(13)
@@ -120,6 +120,12 @@
int ret;
u32 val = (status == GDSC_ON) ? 0 : SW_COLLAPSE_MASK;
+ if (status == GDSC_ON && sc->rsupply) {
+ ret = regulator_enable(sc->rsupply);
+ if (ret < 0)
+ return ret;
+ }
+
ret = regmap_update_bits(sc->regmap, sc->gdscr, SW_COLLAPSE_MASK, val);
if (ret)
return ret;
@@ -149,7 +155,16 @@
udelay(1);
}
- return gdsc_poll_status(sc, status);
+ ret = gdsc_poll_status(sc, status);
+ WARN(ret, "%s status stuck at 'o%s'", sc->pd.name, status ? "ff" : "n");
+
+ if (!ret && status == GDSC_OFF && sc->rsupply) {
+ ret = regulator_disable(sc->rsupply);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
}
static inline int gdsc_deassert_reset(struct gdsc *sc)
@@ -173,7 +188,10 @@
static inline void gdsc_force_mem_on(struct gdsc *sc)
{
int i;
- u32 mask = RETAIN_MEM | RETAIN_PERIPH;
+ u32 mask = RETAIN_MEM;
+
+ if (!(sc->flags & NO_RET_PERIPH))
+ mask |= RETAIN_PERIPH;
for (i = 0; i < sc->cxc_count; i++)
regmap_update_bits(sc->regmap, sc->cxcs[i], mask, mask);
@@ -182,7 +200,10 @@
static inline void gdsc_clear_mem_on(struct gdsc *sc)
{
int i;
- u32 mask = RETAIN_MEM | RETAIN_PERIPH;
+ u32 mask = RETAIN_MEM;
+
+ if (!(sc->flags & NO_RET_PERIPH))
+ mask |= RETAIN_PERIPH;
for (i = 0; i < sc->cxc_count; i++)
regmap_update_bits(sc->regmap, sc->cxcs[i], mask, 0);
@@ -208,6 +229,14 @@
regmap_update_bits(sc->regmap, sc->clamp_io_ctrl,
GMEM_RESET_MASK, 0);
}
+
+static void gdsc_retain_ff_on(struct gdsc *sc)
+{
+ u32 mask = GDSC_RETAIN_FF_ENABLE;
+
+ regmap_update_bits(sc->regmap, sc->gdscr, mask, mask);
+}
+
static int gdsc_enable(struct generic_pm_domain *domain)
{
struct gdsc *sc = domain_to_gdsc(domain);
@@ -259,6 +288,9 @@
*/
udelay(1);
}
+
+ if (sc->flags & RETAIN_FF_ENABLE)
+ gdsc_retain_ff_on(sc);
return 0;
}
@@ -314,7 +346,18 @@
*/
mask = HW_CONTROL_MASK | SW_OVERRIDE_MASK |
EN_REST_WAIT_MASK | EN_FEW_WAIT_MASK | CLK_DIS_WAIT_MASK;
- val = EN_REST_WAIT_VAL | EN_FEW_WAIT_VAL | CLK_DIS_WAIT_VAL;
+
+ if (!sc->en_rest_wait_val)
+ sc->en_rest_wait_val = EN_REST_WAIT_VAL;
+ if (!sc->en_few_wait_val)
+ sc->en_few_wait_val = EN_FEW_WAIT_VAL;
+ if (!sc->clk_dis_wait_val)
+ sc->clk_dis_wait_val = CLK_DIS_WAIT_VAL;
+
+ val = sc->en_rest_wait_val << EN_REST_WAIT_SHIFT |
+ sc->en_few_wait_val << EN_FEW_WAIT_SHIFT |
+ sc->clk_dis_wait_val << CLK_DIS_WAIT_SHIFT;
+
ret = regmap_update_bits(sc->regmap, sc->gdscr, mask, val);
if (ret)
return ret;
@@ -330,19 +373,43 @@
if (on < 0)
return on;
- /*
- * Votable GDSCs can be ON due to Vote from other masters.
- * If a Votable GDSC is ON, make sure we have a Vote.
- */
- if ((sc->flags & VOTABLE) && on)
- gdsc_enable(&sc->pd);
+ if (on) {
+ /* The regulator must be on, sync the kernel state */
+ if (sc->rsupply) {
+ ret = regulator_enable(sc->rsupply);
+ if (ret < 0)
+ return ret;
+ }
- /* If ALWAYS_ON GDSCs are not ON, turn them ON */
- if (sc->flags & ALWAYS_ON) {
- if (!on)
- gdsc_enable(&sc->pd);
+ /*
+ * Votable GDSCs can be ON due to Vote from other masters.
+ * If a Votable GDSC is ON, make sure we have a Vote.
+ */
+ if (sc->flags & VOTABLE) {
+ ret = regmap_update_bits(sc->regmap, sc->gdscr,
+ SW_COLLAPSE_MASK, val);
+ if (ret)
+ return ret;
+ }
+
+ /* Turn on HW trigger mode if supported */
+ if (sc->flags & HW_CTRL) {
+ ret = gdsc_hwctrl(sc, true);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * Make sure the retain bit is set if the GDSC is already on,
+ * otherwise we end up turning off the GDSC and destroying all
+ * the register contents that we thought we were saving.
+ */
+ if (sc->flags & RETAIN_FF_ENABLE)
+ gdsc_retain_ff_on(sc);
+ } else if (sc->flags & ALWAYS_ON) {
+ /* If ALWAYS_ON GDSCs are not ON, turn them ON */
+ gdsc_enable(&sc->pd);
on = true;
- sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
}
if (on || (sc->pwrsts & PWRSTS_RET))
@@ -350,8 +417,12 @@
else
gdsc_clear_mem_on(sc);
- sc->pd.power_off = gdsc_disable;
- sc->pd.power_on = gdsc_enable;
+ if (sc->flags & ALWAYS_ON)
+ sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
+ if (!sc->pd.power_off)
+ sc->pd.power_off = gdsc_disable;
+ if (!sc->pd.power_on)
+ sc->pd.power_on = gdsc_enable;
pm_genpd_init(&sc->pd, NULL, !on);
return 0;
@@ -374,6 +445,15 @@
GFP_KERNEL);
if (!data->domains)
return -ENOMEM;
+
+ for (i = 0; i < num; i++) {
+ if (!scs[i] || !scs[i]->supply)
+ continue;
+
+ scs[i]->rsupply = devm_regulator_get(dev, scs[i]->supply);
+ if (IS_ERR(scs[i]->rsupply))
+ return PTR_ERR(scs[i]->rsupply);
+ }
data->num_domains = num;
for (i = 0; i < num; i++) {
@@ -414,3 +494,29 @@
}
of_genpd_del_provider(dev->of_node);
}
+
+/*
+ * On SDM845+ the GPU GX domain is *almost* entirely controlled by the GMU
+ * running in the CX domain so the CPU doesn't need to know anything about the
+ * GX domain EXCEPT....
+ *
+ * Hardware constraints dictate that the GX be powered down before the CX. If
+ * the GMU crashes it could leave the GX on. In order to successfully bring back
+ * the device the CPU needs to disable the GX headswitch. There being no sane
+ * way to reach in and touch that register from deep inside the GPU driver we
+ * need to set up the infrastructure to be able to ensure that the GPU can
+ * ensure that the GX is off during this super special case. We do this by
+ * defining a GX gdsc with a dummy enable function and a "default" disable
+ * function.
+ *
+ * This allows us to attach with genpd_dev_pm_attach_by_name() in the GPU
+ * driver. During power up, nothing will happen from the CPU (and the GMU will
+ * power up normally but during power down this will ensure that the GX domain
+ * is *really* off - this gives us a semi standard way of doing what we need.
+ */
+int gdsc_gx_do_nothing_enable(struct generic_pm_domain *domain)
+{
+ /* Do nothing but give genpd the impression that we were successful */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gdsc_gx_do_nothing_enable);
--
Gitblit v1.6.2