From 61598093bbdd283a7edc367d900f223070ead8d2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:03 +0000
Subject: [PATCH] add ax88772C AX88772C_eeprom_tools
---
kernel/drivers/clk/bcm/clk-bcm2835.c | 278 +++++++++++++++++++++++++++++++++++++++----------------
1 files changed, 198 insertions(+), 80 deletions(-)
diff --git a/kernel/drivers/clk/bcm/clk-bcm2835.c b/kernel/drivers/clk/bcm/clk-bcm2835.c
index 8a1d565..b7f8987 100644
--- a/kernel/drivers/clk/bcm/clk-bcm2835.c
+++ b/kernel/drivers/clk/bcm/clk-bcm2835.c
@@ -1,17 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2010,2015 Broadcom
* Copyright (C) 2012 Stephen Warren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
/**
@@ -39,8 +29,9 @@
#include <linux/clk.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
+#include <linux/io.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <dt-bindings/clock/bcm2835.h>
@@ -123,6 +114,8 @@
#define CM_AVEODIV 0x1bc
#define CM_EMMCCTL 0x1c0
#define CM_EMMCDIV 0x1c4
+#define CM_EMMC2CTL 0x1d0
+#define CM_EMMC2DIV 0x1d4
/* General bits for the CM_*CTL regs */
# define CM_ENABLE BIT(4)
@@ -298,6 +291,10 @@
#define LOCK_TIMEOUT_NS 100000000
#define BCM2835_MAX_FB_RATE 1750000000u
+#define SOC_BCM2835 BIT(0)
+#define SOC_BCM2711 BIT(1)
+#define SOC_ALL (SOC_BCM2835 | SOC_BCM2711)
+
/*
* Names of clocks used within the driver that need to be replaced
* with an external parent's name. This array is in the order that
@@ -317,6 +314,7 @@
struct device *dev;
void __iomem *regs;
spinlock_t regs_lock; /* spinlock for all clocks */
+ unsigned int soc;
/*
* Real names of cprman clock parents looked up through
@@ -327,6 +325,10 @@
/* Must be last */
struct clk_hw_onecell_data onecell;
+};
+
+struct cprman_plat_data {
+ unsigned int soc;
};
static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val)
@@ -395,8 +397,8 @@
}
static void bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base,
- struct debugfs_reg32 *regs, size_t nregs,
- struct dentry *dentry)
+ const struct debugfs_reg32 *regs,
+ size_t nregs, struct dentry *dentry)
{
struct debugfs_regset32 *regset;
@@ -420,6 +422,7 @@
u32 reference_enable_mask;
/* Bit in CM_LOCK to indicate when the PLL has locked. */
u32 lock_mask;
+ u32 flags;
const struct bcm2835_pll_ana_bits *ana;
@@ -524,6 +527,20 @@
A2W_PLL_CTRL_PRST_DISABLE;
}
+static u32 bcm2835_pll_get_prediv_mask(struct bcm2835_cprman *cprman,
+ const struct bcm2835_pll_data *data)
+{
+ /*
+ * On BCM2711 there isn't a pre-divisor available in the PLL feedback
+ * loop. Bits 13:14 of ANA1 (PLLA,PLLB,PLLC,PLLD) have been re-purposed
+ * for to for VCO RANGE bits.
+ */
+ if (cprman->soc & SOC_BCM2711)
+ return 0;
+
+ return data->ana->fb_prediv_mask;
+}
+
static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate,
unsigned long parent_rate,
u32 *ndiv, u32 *fdiv)
@@ -581,7 +598,7 @@
ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT;
pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT;
using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &
- data->ana->fb_prediv_mask;
+ bcm2835_pll_get_prediv_mask(cprman, data);
if (using_prediv) {
ndiv *= 2;
@@ -664,6 +681,7 @@
struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
struct bcm2835_cprman *cprman = pll->cprman;
const struct bcm2835_pll_data *data = pll->data;
+ u32 prediv_mask = bcm2835_pll_get_prediv_mask(cprman, data);
bool was_using_prediv, use_fb_prediv, do_ana_setup_first;
u32 ndiv, fdiv, a2w_ctl;
u32 ana[4];
@@ -681,7 +699,7 @@
for (i = 3; i >= 0; i--)
ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);
- was_using_prediv = ana[1] & data->ana->fb_prediv_mask;
+ was_using_prediv = ana[1] & prediv_mask;
ana[0] &= ~data->ana->mask0;
ana[0] |= data->ana->set0;
@@ -691,10 +709,10 @@
ana[3] |= data->ana->set3;
if (was_using_prediv && !use_fb_prediv) {
- ana[1] &= ~data->ana->fb_prediv_mask;
+ ana[1] &= ~prediv_mask;
do_ana_setup_first = true;
} else if (!was_using_prediv && use_fb_prediv) {
- ana[1] |= data->ana->fb_prediv_mask;
+ ana[1] |= prediv_mask;
do_ana_setup_first = false;
} else {
do_ana_setup_first = true;
@@ -950,9 +968,9 @@
return div;
}
-static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
- unsigned long parent_rate,
- u32 div)
+static unsigned long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+ unsigned long parent_rate,
+ u32 div)
{
const struct bcm2835_clock_data *data = clock->data;
u64 temp;
@@ -1234,7 +1252,7 @@
return (src & CM_SRC_MASK) >> CM_SRC_SHIFT;
}
-static struct debugfs_reg32 bcm2835_debugfs_clock_reg32[] = {
+static const struct debugfs_reg32 bcm2835_debugfs_clock_reg32[] = {
{
.name = "ctl",
.offset = 0,
@@ -1290,10 +1308,11 @@
};
static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
- const struct bcm2835_pll_data *data)
+ const void *data)
{
+ const struct bcm2835_pll_data *pll_data = data;
struct bcm2835_pll *pll;
- struct clk_init_data init = {};
+ struct clk_init_data init;
int ret;
memset(&init, 0, sizeof(init));
@@ -1301,16 +1320,16 @@
/* All of the PLLs derive from the external oscillator. */
init.parent_names = &cprman->real_parent_names[0];
init.num_parents = 1;
- init.name = data->name;
+ init.name = pll_data->name;
init.ops = &bcm2835_pll_clk_ops;
- init.flags = CLK_IGNORE_UNUSED;
+ init.flags = pll_data->flags | CLK_IGNORE_UNUSED;
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
return NULL;
pll->cprman = cprman;
- pll->data = data;
+ pll->data = pll_data;
pll->hw.init = &init;
ret = devm_clk_hw_register(cprman->dev, &pll->hw);
@@ -1323,35 +1342,36 @@
static struct clk_hw *
bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
- const struct bcm2835_pll_divider_data *data)
+ const void *data)
{
+ const struct bcm2835_pll_divider_data *divider_data = data;
struct bcm2835_pll_divider *divider;
- struct clk_init_data init = {};
+ struct clk_init_data init;
const char *divider_name;
int ret;
- if (data->fixed_divider != 1) {
+ if (divider_data->fixed_divider != 1) {
divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL,
- "%s_prediv", data->name);
+ "%s_prediv", divider_data->name);
if (!divider_name)
return NULL;
} else {
- divider_name = data->name;
+ divider_name = divider_data->name;
}
memset(&init, 0, sizeof(init));
- init.parent_names = &data->source_pll;
+ init.parent_names = ÷r_data->source_pll;
init.num_parents = 1;
init.name = divider_name;
init.ops = &bcm2835_pll_divider_clk_ops;
- init.flags = data->flags | CLK_IGNORE_UNUSED;
+ init.flags = divider_data->flags | CLK_IGNORE_UNUSED;
divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL);
if (!divider)
return NULL;
- divider->div.reg = cprman->regs + data->a2w_reg;
+ divider->div.reg = cprman->regs + divider_data->a2w_reg;
divider->div.shift = A2W_PLL_DIV_SHIFT;
divider->div.width = A2W_PLL_DIV_BITS;
divider->div.flags = CLK_DIVIDER_MAX_AT_ZERO;
@@ -1360,7 +1380,7 @@
divider->div.table = NULL;
divider->cprman = cprman;
- divider->data = data;
+ divider->data = divider_data;
ret = devm_clk_hw_register(cprman->dev, ÷r->div.hw);
if (ret)
@@ -1370,22 +1390,24 @@
* PLLH's channels have a fixed divide by 10 afterwards, which
* is what our consumers are actually using.
*/
- if (data->fixed_divider != 1) {
- return clk_hw_register_fixed_factor(cprman->dev, data->name,
+ if (divider_data->fixed_divider != 1) {
+ return clk_hw_register_fixed_factor(cprman->dev,
+ divider_data->name,
divider_name,
CLK_SET_RATE_PARENT,
1,
- data->fixed_divider);
+ divider_data->fixed_divider);
}
return ÷r->div.hw;
}
static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
- const struct bcm2835_clock_data *data)
+ const void *data)
{
+ const struct bcm2835_clock_data *clock_data = data;
struct bcm2835_clock *clock;
- struct clk_init_data init = {};
+ struct clk_init_data init;
const char *parents[1 << CM_SRC_BITS];
size_t i;
int ret;
@@ -1394,8 +1416,8 @@
* Replace our strings referencing parent clocks with the
* actual clock-output-name of the parent.
*/
- for (i = 0; i < data->num_mux_parents; i++) {
- parents[i] = data->parents[i];
+ for (i = 0; i < clock_data->num_mux_parents; i++) {
+ parents[i] = clock_data->parents[i];
ret = match_string(cprman_parent_names,
ARRAY_SIZE(cprman_parent_names),
@@ -1406,18 +1428,18 @@
memset(&init, 0, sizeof(init));
init.parent_names = parents;
- init.num_parents = data->num_mux_parents;
- init.name = data->name;
- init.flags = data->flags | CLK_IGNORE_UNUSED;
+ init.num_parents = clock_data->num_mux_parents;
+ init.name = clock_data->name;
+ init.flags = clock_data->flags | CLK_IGNORE_UNUSED;
/*
* Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate
* rate changes on at least of the parents.
*/
- if (data->set_rate_parent)
+ if (clock_data->set_rate_parent)
init.flags |= CLK_SET_RATE_PARENT;
- if (data->is_vpu_clock) {
+ if (clock_data->is_vpu_clock) {
init.ops = &bcm2835_vpu_clock_clk_ops;
} else {
init.ops = &bcm2835_clock_clk_ops;
@@ -1426,7 +1448,7 @@
/* If the clock wasn't actually enabled at boot, it's not
* critical.
*/
- if (!(cprman_read(cprman, data->ctl_reg) & CM_ENABLE))
+ if (!(cprman_read(cprman, clock_data->ctl_reg) & CM_ENABLE))
init.flags &= ~CLK_IS_CRITICAL;
}
@@ -1435,7 +1457,7 @@
return NULL;
clock->cprman = cprman;
- clock->data = data;
+ clock->data = clock_data;
clock->hw.init = &init;
ret = devm_clk_hw_register(cprman->dev, &clock->hw);
@@ -1445,34 +1467,42 @@
}
static struct clk_hw *bcm2835_register_gate(struct bcm2835_cprman *cprman,
- const struct bcm2835_gate_data *data)
+ const void *data)
{
- return clk_hw_register_gate(cprman->dev, data->name, data->parent,
+ const struct bcm2835_gate_data *gate_data = data;
+
+ return clk_hw_register_gate(cprman->dev, gate_data->name,
+ gate_data->parent,
CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
- cprman->regs + data->ctl_reg,
+ cprman->regs + gate_data->ctl_reg,
CM_GATE_BIT, 0, &cprman->regs_lock);
}
-typedef struct clk_hw *(*bcm2835_clk_register)(struct bcm2835_cprman *cprman,
- const void *data);
struct bcm2835_clk_desc {
- bcm2835_clk_register clk_register;
+ struct clk_hw *(*clk_register)(struct bcm2835_cprman *cprman,
+ const void *data);
+ unsigned int supported;
const void *data;
};
/* assignment helper macros for different clock types */
-#define _REGISTER(f, ...) { .clk_register = (bcm2835_clk_register)f, \
- .data = __VA_ARGS__ }
-#define REGISTER_PLL(...) _REGISTER(&bcm2835_register_pll, \
+#define _REGISTER(f, s, ...) { .clk_register = f, \
+ .supported = s, \
+ .data = __VA_ARGS__ }
+#define REGISTER_PLL(s, ...) _REGISTER(&bcm2835_register_pll, \
+ s, \
&(struct bcm2835_pll_data) \
{__VA_ARGS__})
-#define REGISTER_PLL_DIV(...) _REGISTER(&bcm2835_register_pll_divider, \
- &(struct bcm2835_pll_divider_data) \
- {__VA_ARGS__})
-#define REGISTER_CLK(...) _REGISTER(&bcm2835_register_clock, \
+#define REGISTER_PLL_DIV(s, ...) _REGISTER(&bcm2835_register_pll_divider, \
+ s, \
+ &(struct bcm2835_pll_divider_data) \
+ {__VA_ARGS__})
+#define REGISTER_CLK(s, ...) _REGISTER(&bcm2835_register_clock, \
+ s, \
&(struct bcm2835_clock_data) \
{__VA_ARGS__})
-#define REGISTER_GATE(...) _REGISTER(&bcm2835_register_gate, \
+#define REGISTER_GATE(s, ...) _REGISTER(&bcm2835_register_gate, \
+ s, \
&(struct bcm2835_gate_data) \
{__VA_ARGS__})
@@ -1486,7 +1516,8 @@
"testdebug1"
};
-#define REGISTER_OSC_CLK(...) REGISTER_CLK( \
+#define REGISTER_OSC_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents), \
.parents = bcm2835_clock_osc_parents, \
__VA_ARGS__)
@@ -1503,7 +1534,8 @@
"pllh_aux",
};
-#define REGISTER_PER_CLK(...) REGISTER_CLK( \
+#define REGISTER_PER_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents), \
.parents = bcm2835_clock_per_parents, \
__VA_ARGS__)
@@ -1528,7 +1560,8 @@
"-",
};
-#define REGISTER_PCM_CLK(...) REGISTER_CLK( \
+#define REGISTER_PCM_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_pcm_per_parents), \
.parents = bcm2835_pcm_per_parents, \
__VA_ARGS__)
@@ -1547,7 +1580,8 @@
"pllc_core2",
};
-#define REGISTER_VPU_CLK(...) REGISTER_CLK( \
+#define REGISTER_VPU_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents), \
.parents = bcm2835_clock_vpu_parents, \
__VA_ARGS__)
@@ -1583,12 +1617,14 @@
"dsi1_byte_inv",
};
-#define REGISTER_DSI0_CLK(...) REGISTER_CLK( \
+#define REGISTER_DSI0_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi0_parents), \
.parents = bcm2835_clock_dsi0_parents, \
__VA_ARGS__)
-#define REGISTER_DSI1_CLK(...) REGISTER_CLK( \
+#define REGISTER_DSI1_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi1_parents), \
.parents = bcm2835_clock_dsi1_parents, \
__VA_ARGS__)
@@ -1608,6 +1644,7 @@
* AUDIO domain is on.
*/
[BCM2835_PLLA] = REGISTER_PLL(
+ SOC_ALL,
.name = "plla",
.cm_ctrl_reg = CM_PLLA,
.a2w_ctrl_reg = A2W_PLLA_CTRL,
@@ -1622,6 +1659,7 @@
.max_rate = 2400000000u,
.max_fb_rate = BCM2835_MAX_FB_RATE),
[BCM2835_PLLA_CORE] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plla_core",
.source_pll = "plla",
.cm_reg = CM_PLLA,
@@ -1631,6 +1669,7 @@
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLA_PER] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plla_per",
.source_pll = "plla",
.cm_reg = CM_PLLA,
@@ -1640,6 +1679,7 @@
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plla_dsi0",
.source_pll = "plla",
.cm_reg = CM_PLLA,
@@ -1648,6 +1688,7 @@
.hold_mask = CM_PLLA_HOLDDSI0,
.fixed_divider = 1),
[BCM2835_PLLA_CCP2] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plla_ccp2",
.source_pll = "plla",
.cm_reg = CM_PLLA,
@@ -1659,6 +1700,7 @@
/* PLLB is used for the ARM's clock. */
[BCM2835_PLLB] = REGISTER_PLL(
+ SOC_ALL,
.name = "pllb",
.cm_ctrl_reg = CM_PLLB,
.a2w_ctrl_reg = A2W_PLLB_CTRL,
@@ -1671,8 +1713,10 @@
.min_rate = 600000000u,
.max_rate = 3000000000u,
- .max_fb_rate = BCM2835_MAX_FB_RATE),
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+ .flags = CLK_GET_RATE_NOCACHE),
[BCM2835_PLLB_ARM] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "pllb_arm",
.source_pll = "pllb",
.cm_reg = CM_PLLB,
@@ -1680,7 +1724,7 @@
.load_mask = CM_PLLB_LOADARM,
.hold_mask = CM_PLLB_HOLDARM,
.fixed_divider = 1,
- .flags = CLK_SET_RATE_PARENT),
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE),
/*
* PLLC is the core PLL, used to drive the core VPU clock.
@@ -1689,6 +1733,7 @@
* AUDIO domain is on.
*/
[BCM2835_PLLC] = REGISTER_PLL(
+ SOC_ALL,
.name = "pllc",
.cm_ctrl_reg = CM_PLLC,
.a2w_ctrl_reg = A2W_PLLC_CTRL,
@@ -1703,6 +1748,7 @@
.max_rate = 3000000000u,
.max_fb_rate = BCM2835_MAX_FB_RATE),
[BCM2835_PLLC_CORE0] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "pllc_core0",
.source_pll = "pllc",
.cm_reg = CM_PLLC,
@@ -1712,6 +1758,7 @@
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLC_CORE1] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "pllc_core1",
.source_pll = "pllc",
.cm_reg = CM_PLLC,
@@ -1721,6 +1768,7 @@
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLC_CORE2] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "pllc_core2",
.source_pll = "pllc",
.cm_reg = CM_PLLC,
@@ -1730,6 +1778,7 @@
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLC_PER] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "pllc_per",
.source_pll = "pllc",
.cm_reg = CM_PLLC,
@@ -1737,7 +1786,7 @@
.load_mask = CM_PLLC_LOADPER,
.hold_mask = CM_PLLC_HOLDPER,
.fixed_divider = 1,
- .flags = CLK_SET_RATE_PARENT),
+ .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
/*
* PLLD is the display PLL, used to drive DSI display panels.
@@ -1746,6 +1795,7 @@
* AUDIO domain is on.
*/
[BCM2835_PLLD] = REGISTER_PLL(
+ SOC_ALL,
.name = "plld",
.cm_ctrl_reg = CM_PLLD,
.a2w_ctrl_reg = A2W_PLLD_CTRL,
@@ -1760,6 +1810,7 @@
.max_rate = 2400000000u,
.max_fb_rate = BCM2835_MAX_FB_RATE),
[BCM2835_PLLD_CORE] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plld_core",
.source_pll = "plld",
.cm_reg = CM_PLLD,
@@ -1768,7 +1819,13 @@
.hold_mask = CM_PLLD_HOLDCORE,
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
+ /*
+ * VPU firmware assumes that PLLD_PER isn't disabled by the ARM core.
+ * Otherwise this could cause firmware lookups. That's why we mark
+ * it as critical.
+ */
[BCM2835_PLLD_PER] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plld_per",
.source_pll = "plld",
.cm_reg = CM_PLLD,
@@ -1776,8 +1833,9 @@
.load_mask = CM_PLLD_LOADPER,
.hold_mask = CM_PLLD_HOLDPER,
.fixed_divider = 1,
- .flags = CLK_SET_RATE_PARENT),
+ .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
[BCM2835_PLLD_DSI0] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plld_dsi0",
.source_pll = "plld",
.cm_reg = CM_PLLD,
@@ -1786,6 +1844,7 @@
.hold_mask = CM_PLLD_HOLDDSI0,
.fixed_divider = 1),
[BCM2835_PLLD_DSI1] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plld_dsi1",
.source_pll = "plld",
.cm_reg = CM_PLLD,
@@ -1801,6 +1860,7 @@
* It is in the HDMI power domain.
*/
[BCM2835_PLLH] = REGISTER_PLL(
+ SOC_BCM2835,
"pllh",
.cm_ctrl_reg = CM_PLLH,
.a2w_ctrl_reg = A2W_PLLH_CTRL,
@@ -1815,6 +1875,7 @@
.max_rate = 3000000000u,
.max_fb_rate = BCM2835_MAX_FB_RATE),
[BCM2835_PLLH_RCAL] = REGISTER_PLL_DIV(
+ SOC_BCM2835,
.name = "pllh_rcal",
.source_pll = "pllh",
.cm_reg = CM_PLLH,
@@ -1824,6 +1885,7 @@
.fixed_divider = 10,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLH_AUX] = REGISTER_PLL_DIV(
+ SOC_BCM2835,
.name = "pllh_aux",
.source_pll = "pllh",
.cm_reg = CM_PLLH,
@@ -1833,6 +1895,7 @@
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLH_PIX] = REGISTER_PLL_DIV(
+ SOC_BCM2835,
.name = "pllh_pix",
.source_pll = "pllh",
.cm_reg = CM_PLLH,
@@ -1848,6 +1911,7 @@
/* One Time Programmable Memory clock. Maximum 10Mhz. */
[BCM2835_CLOCK_OTP] = REGISTER_OSC_CLK(
+ SOC_ALL,
.name = "otp",
.ctl_reg = CM_OTPCTL,
.div_reg = CM_OTPDIV,
@@ -1859,6 +1923,7 @@
* bythe watchdog timer and the camera pulse generator.
*/
[BCM2835_CLOCK_TIMER] = REGISTER_OSC_CLK(
+ SOC_ALL,
.name = "timer",
.ctl_reg = CM_TIMERCTL,
.div_reg = CM_TIMERDIV,
@@ -1869,12 +1934,14 @@
* Generally run at 2Mhz, max 5Mhz.
*/
[BCM2835_CLOCK_TSENS] = REGISTER_OSC_CLK(
+ SOC_ALL,
.name = "tsens",
.ctl_reg = CM_TSENSCTL,
.div_reg = CM_TSENSDIV,
.int_bits = 5,
.frac_bits = 0),
[BCM2835_CLOCK_TEC] = REGISTER_OSC_CLK(
+ SOC_ALL,
.name = "tec",
.ctl_reg = CM_TECCTL,
.div_reg = CM_TECDIV,
@@ -1883,6 +1950,7 @@
/* clocks with vpu parent mux */
[BCM2835_CLOCK_H264] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "h264",
.ctl_reg = CM_H264CTL,
.div_reg = CM_H264DIV,
@@ -1890,6 +1958,7 @@
.frac_bits = 8,
.tcnt_mux = 1),
[BCM2835_CLOCK_ISP] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "isp",
.ctl_reg = CM_ISPCTL,
.div_reg = CM_ISPDIV,
@@ -1902,6 +1971,7 @@
* in the SDRAM controller can't be used.
*/
[BCM2835_CLOCK_SDRAM] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "sdram",
.ctl_reg = CM_SDCCTL,
.div_reg = CM_SDCDIV,
@@ -1909,6 +1979,7 @@
.frac_bits = 0,
.tcnt_mux = 3),
[BCM2835_CLOCK_V3D] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "v3d",
.ctl_reg = CM_V3DCTL,
.div_reg = CM_V3DDIV,
@@ -1922,6 +1993,7 @@
* in various hardware documentation.
*/
[BCM2835_CLOCK_VPU] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "vpu",
.ctl_reg = CM_VPUCTL,
.div_reg = CM_VPUDIV,
@@ -1933,6 +2005,7 @@
/* clocks with per parent mux */
[BCM2835_CLOCK_AVEO] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "aveo",
.ctl_reg = CM_AVEOCTL,
.div_reg = CM_AVEODIV,
@@ -1940,6 +2013,7 @@
.frac_bits = 0,
.tcnt_mux = 38),
[BCM2835_CLOCK_CAM0] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "cam0",
.ctl_reg = CM_CAM0CTL,
.div_reg = CM_CAM0DIV,
@@ -1947,6 +2021,7 @@
.frac_bits = 8,
.tcnt_mux = 14),
[BCM2835_CLOCK_CAM1] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "cam1",
.ctl_reg = CM_CAM1CTL,
.div_reg = CM_CAM1DIV,
@@ -1954,12 +2029,14 @@
.frac_bits = 8,
.tcnt_mux = 15),
[BCM2835_CLOCK_DFT] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "dft",
.ctl_reg = CM_DFTCTL,
.div_reg = CM_DFTDIV,
.int_bits = 5,
.frac_bits = 0),
[BCM2835_CLOCK_DPI] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "dpi",
.ctl_reg = CM_DPICTL,
.div_reg = CM_DPIDIV,
@@ -1969,6 +2046,7 @@
/* Arasan EMMC clock */
[BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "emmc",
.ctl_reg = CM_EMMCCTL,
.div_reg = CM_EMMCDIV,
@@ -1976,8 +2054,19 @@
.frac_bits = 8,
.tcnt_mux = 39),
+ /* EMMC2 clock (only available for BCM2711) */
+ [BCM2711_CLOCK_EMMC2] = REGISTER_PER_CLK(
+ SOC_BCM2711,
+ .name = "emmc2",
+ .ctl_reg = CM_EMMC2CTL,
+ .div_reg = CM_EMMC2DIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+ .tcnt_mux = 42),
+
/* General purpose (GPIO) clocks */
[BCM2835_CLOCK_GP0] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "gp0",
.ctl_reg = CM_GP0CTL,
.div_reg = CM_GP0DIV,
@@ -1986,6 +2075,7 @@
.is_mash_clock = true,
.tcnt_mux = 20),
[BCM2835_CLOCK_GP1] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "gp1",
.ctl_reg = CM_GP1CTL,
.div_reg = CM_GP1DIV,
@@ -1995,6 +2085,7 @@
.is_mash_clock = true,
.tcnt_mux = 21),
[BCM2835_CLOCK_GP2] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "gp2",
.ctl_reg = CM_GP2CTL,
.div_reg = CM_GP2DIV,
@@ -2004,6 +2095,7 @@
/* HDMI state machine */
[BCM2835_CLOCK_HSM] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "hsm",
.ctl_reg = CM_HSMCTL,
.div_reg = CM_HSMDIV,
@@ -2011,6 +2103,7 @@
.frac_bits = 8,
.tcnt_mux = 22),
[BCM2835_CLOCK_PCM] = REGISTER_PCM_CLK(
+ SOC_ALL,
.name = "pcm",
.ctl_reg = CM_PCMCTL,
.div_reg = CM_PCMDIV,
@@ -2020,6 +2113,7 @@
.low_jitter = true,
.tcnt_mux = 23),
[BCM2835_CLOCK_PWM] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "pwm",
.ctl_reg = CM_PWMCTL,
.div_reg = CM_PWMDIV,
@@ -2028,6 +2122,7 @@
.is_mash_clock = true,
.tcnt_mux = 24),
[BCM2835_CLOCK_SLIM] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "slim",
.ctl_reg = CM_SLIMCTL,
.div_reg = CM_SLIMDIV,
@@ -2036,6 +2131,7 @@
.is_mash_clock = true,
.tcnt_mux = 25),
[BCM2835_CLOCK_SMI] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "smi",
.ctl_reg = CM_SMICTL,
.div_reg = CM_SMIDIV,
@@ -2043,6 +2139,7 @@
.frac_bits = 8,
.tcnt_mux = 27),
[BCM2835_CLOCK_UART] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "uart",
.ctl_reg = CM_UARTCTL,
.div_reg = CM_UARTDIV,
@@ -2052,6 +2149,7 @@
/* TV encoder clock. Only operating frequency is 108Mhz. */
[BCM2835_CLOCK_VEC] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "vec",
.ctl_reg = CM_VECCTL,
.div_reg = CM_VECDIV,
@@ -2066,6 +2164,7 @@
/* dsi clocks */
[BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "dsi0e",
.ctl_reg = CM_DSI0ECTL,
.div_reg = CM_DSI0EDIV,
@@ -2073,6 +2172,7 @@
.frac_bits = 8,
.tcnt_mux = 18),
[BCM2835_CLOCK_DSI1E] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "dsi1e",
.ctl_reg = CM_DSI1ECTL,
.div_reg = CM_DSI1EDIV,
@@ -2080,6 +2180,7 @@
.frac_bits = 8,
.tcnt_mux = 19),
[BCM2835_CLOCK_DSI0P] = REGISTER_DSI0_CLK(
+ SOC_ALL,
.name = "dsi0p",
.ctl_reg = CM_DSI0PCTL,
.div_reg = CM_DSI0PDIV,
@@ -2087,6 +2188,7 @@
.frac_bits = 0,
.tcnt_mux = 12),
[BCM2835_CLOCK_DSI1P] = REGISTER_DSI1_CLK(
+ SOC_ALL,
.name = "dsi1p",
.ctl_reg = CM_DSI1PCTL,
.div_reg = CM_DSI1PDIV,
@@ -2103,6 +2205,7 @@
* non-stop vpu clock.
*/
[BCM2835_CLOCK_PERI_IMAGE] = REGISTER_GATE(
+ SOC_ALL,
.name = "peri_image",
.parent = "vpu",
.ctl_reg = CM_PERIICTL),
@@ -2132,11 +2235,15 @@
struct device *dev = &pdev->dev;
struct clk_hw **hws;
struct bcm2835_cprman *cprman;
- struct resource *res;
const struct bcm2835_clk_desc *desc;
const size_t asize = ARRAY_SIZE(clk_desc_array);
+ const struct cprman_plat_data *pdata;
size_t i;
int ret;
+
+ pdata = of_device_get_match_data(&pdev->dev);
+ if (!pdata)
+ return -ENODEV;
cprman = devm_kzalloc(dev,
struct_size(cprman, onecell.hws, asize),
@@ -2146,8 +2253,7 @@
spin_lock_init(&cprman->regs_lock);
cprman->dev = dev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- cprman->regs = devm_ioremap_resource(dev, res);
+ cprman->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(cprman->regs))
return PTR_ERR(cprman->regs);
@@ -2169,12 +2275,15 @@
platform_set_drvdata(pdev, cprman);
cprman->onecell.num = asize;
+ cprman->soc = pdata->soc;
hws = cprman->onecell.hws;
for (i = 0; i < asize; i++) {
desc = &clk_desc_array[i];
- if (desc->clk_register && desc->data)
+ if (desc->clk_register && desc->data &&
+ (desc->supported & pdata->soc)) {
hws[i] = desc->clk_register(cprman, desc->data);
+ }
}
ret = bcm2835_mark_sdc_parent_critical(hws[BCM2835_CLOCK_SDRAM]->clk);
@@ -2185,8 +2294,17 @@
&cprman->onecell);
}
+static const struct cprman_plat_data cprman_bcm2835_plat_data = {
+ .soc = SOC_BCM2835,
+};
+
+static const struct cprman_plat_data cprman_bcm2711_plat_data = {
+ .soc = SOC_BCM2711,
+};
+
static const struct of_device_id bcm2835_clk_of_match[] = {
- { .compatible = "brcm,bcm2835-cprman", },
+ { .compatible = "brcm,bcm2835-cprman", .data = &cprman_bcm2835_plat_data },
+ { .compatible = "brcm,bcm2711-cprman", .data = &cprman_bcm2711_plat_data },
{}
};
MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
@@ -2203,4 +2321,4 @@
MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
MODULE_DESCRIPTION("BCM2835 clock driver");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
--
Gitblit v1.6.2