From 61598093bbdd283a7edc367d900f223070ead8d2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:03 +0000
Subject: [PATCH] add ax88772C AX88772C_eeprom_tools
---
kernel/arch/arm64/boot/dts/marvell/armada-7040-db.dts | 69 ++++++++++++++++++++++++++--------
1 files changed, 53 insertions(+), 16 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/kernel/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 412efdb..a7eb4e7 100644
--- a/kernel/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/kernel/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -28,6 +28,32 @@
ethernet2 = &cp0_eth2;
};
+ cp0_exp_usb3_0_current_regulator: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "cp0-usb3-0-current-regulator";
+ regulator-type = "current";
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <900000>;
+ gpios = <&expander0 4 GPIO_ACTIVE_HIGH>;
+ states = <500000 0x0
+ 900000 0x1>;
+ enable-active-high;
+ gpios-states = <0>;
+ };
+
+ cp0_exp_usb3_1_current_regulator: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "cp0-usb3-1-current-regulator";
+ regulator-type = "current";
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <900000>;
+ gpios = <&expander0 5 GPIO_ACTIVE_HIGH>;
+ states = <500000 0x0
+ 900000 0x1>;
+ enable-active-high;
+ gpios-states = <0>;
+ };
+
cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h0-vbus";
@@ -35,6 +61,7 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&cp0_exp_usb3_0_current_regulator>;
};
cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
@@ -44,16 +71,7 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_usb3_0_phy: cp0-usb3-0-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_0_vbus>;
- };
-
- cp0_usb3_1_phy: cp0-usb3-1-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_1_vbus>;
+ vin-supply = <&cp0_exp_usb3_1_current_regulator>;
};
};
@@ -66,8 +84,6 @@
status = "okay";
spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
@@ -98,6 +114,8 @@
&cp0_pcie2 {
status = "okay";
+ phys = <&cp0_comphy5 2>;
+ phy-names = "cp0-pcie2-x1-phy";
};
&cp0_i2c0 {
@@ -169,8 +187,6 @@
status = "okay";
spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
@@ -195,15 +211,36 @@
&cp0_sata0 {
status = "okay";
+
+ sata-port@1 {
+ phys = <&cp0_comphy3 1>;
+ phy-names = "cp0-sata0-1-phy";
+ };
+};
+
+&cp0_comphy1 {
+ cp0_usbh0_con: connector {
+ compatible = "usb-a-connector";
+ phy-supply = <&cp0_reg_usb3_0_vbus>;
+ };
};
&cp0_usb3_0 {
- usb-phy = <&cp0_usb3_0_phy>;
+ phys = <&cp0_comphy1 0>;
+ phy-names = "cp0-usb3h0-comphy";
status = "okay";
};
+&cp0_comphy4 {
+ cp0_usbh1_con: connector {
+ compatible = "usb-a-connector";
+ phy-supply = <&cp0_reg_usb3_1_vbus>;
+ };
+};
+
&cp0_usb3_1 {
- usb-phy = <&cp0_usb3_1_phy>;
+ phys = <&cp0_comphy4 1>;
+ phy-names = "cp0-usb3h1-comphy";
status = "okay";
};
--
Gitblit v1.6.2