From 50a212ec906f7524620675f0c57357691c26c81f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 16 Oct 2024 01:20:19 +0000
Subject: [PATCH] 修改GPIO导出默认初始值
---
kernel/drivers/acpi/acpica/exfield.c | 382 +++++++++++++++++++-----------------------------------
1 files changed, 133 insertions(+), 249 deletions(-)
diff --git a/kernel/drivers/acpi/acpica/exfield.c b/kernel/drivers/acpi/acpica/exfield.c
index b272c32..b3230e5 100644
--- a/kernel/drivers/acpi/acpica/exfield.c
+++ b/kernel/drivers/acpi/acpica/exfield.c
@@ -1,9 +1,9 @@
// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
/******************************************************************************
*
- * Module Name: exfield - ACPI AML (p-code) execution - field manipulation
+ * Module Name: exfield - AML execution - field_unit read/write
*
- * Copyright (C) 2000 - 2018, Intel Corp.
+ * Copyright (C) 2000 - 2020, Intel Corp.
*
*****************************************************************************/
@@ -16,64 +16,73 @@
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exfield")
-/* Local prototypes */
-static u32
-acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length);
+/*
+ * This table maps the various Attrib protocols to the byte transfer
+ * length. Used for the generic serial bus.
+ */
+#define ACPI_INVALID_PROTOCOL_ID 0x80
+#define ACPI_MAX_PROTOCOL_ID 0x0F
+static const u8 acpi_protocol_lengths[] = {
+ ACPI_INVALID_PROTOCOL_ID, /* 0 - reserved */
+ ACPI_INVALID_PROTOCOL_ID, /* 1 - reserved */
+ 0x00, /* 2 - ATTRIB_QUICK */
+ ACPI_INVALID_PROTOCOL_ID, /* 3 - reserved */
+ 0x01, /* 4 - ATTRIB_SEND_RECEIVE */
+ ACPI_INVALID_PROTOCOL_ID, /* 5 - reserved */
+ 0x01, /* 6 - ATTRIB_BYTE */
+ ACPI_INVALID_PROTOCOL_ID, /* 7 - reserved */
+ 0x02, /* 8 - ATTRIB_WORD */
+ ACPI_INVALID_PROTOCOL_ID, /* 9 - reserved */
+ 0xFF, /* A - ATTRIB_BLOCK */
+ 0xFF, /* B - ATTRIB_BYTES */
+ 0x02, /* C - ATTRIB_PROCESS_CALL */
+ 0xFF, /* D - ATTRIB_BLOCK_PROCESS_CALL */
+ 0xFF, /* E - ATTRIB_RAW_BYTES */
+ 0xFF /* F - ATTRIB_RAW_PROCESS_BYTES */
+};
+
+#define PCC_MASTER_SUBSPACE 3
+
+/*
+ * The following macros determine a given offset is a COMD field.
+ * According to the specification, generic subspaces (types 0-2) contains a
+ * 2-byte COMD field at offset 4 and master subspaces (type 3) contains a 4-byte
+ * COMD field starting at offset 12.
+ */
+#define GENERIC_SUBSPACE_COMMAND(a) (4 == a || a == 5)
+#define MASTER_SUBSPACE_COMMAND(a) (12 <= a && a <= 15)
/*******************************************************************************
*
- * FUNCTION: acpi_ex_get_serial_access_length
+ * FUNCTION: acpi_ex_get_protocol_buffer_length
*
- * PARAMETERS: accessor_type - The type of the protocol indicated by region
+ * PARAMETERS: protocol_id - The type of the protocol indicated by region
* field access attributes
- * access_length - The access length of the region field
+ * return_length - Where the protocol byte transfer length is
+ * returned
*
- * RETURN: Decoded access length
+ * RETURN: Status and decoded byte transfer length
*
* DESCRIPTION: This routine returns the length of the generic_serial_bus
* protocol bytes
*
******************************************************************************/
-static u32
-acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length)
+acpi_status
+acpi_ex_get_protocol_buffer_length(u32 protocol_id, u32 *return_length)
{
- u32 length;
- switch (accessor_type) {
- case AML_FIELD_ATTRIB_QUICK:
+ if ((protocol_id > ACPI_MAX_PROTOCOL_ID) ||
+ (acpi_protocol_lengths[protocol_id] == ACPI_INVALID_PROTOCOL_ID)) {
+ ACPI_ERROR((AE_INFO,
+ "Invalid Field/AccessAs protocol ID: 0x%4.4X",
+ protocol_id));
- length = 0;
- break;
-
- case AML_FIELD_ATTRIB_SEND_RCV:
- case AML_FIELD_ATTRIB_BYTE:
-
- length = 1;
- break;
-
- case AML_FIELD_ATTRIB_WORD:
- case AML_FIELD_ATTRIB_WORD_CALL:
-
- length = 2;
- break;
-
- case AML_FIELD_ATTRIB_MULTIBYTE:
- case AML_FIELD_ATTRIB_RAW_BYTES:
- case AML_FIELD_ATTRIB_RAW_PROCESS:
-
- length = access_length;
- break;
-
- case AML_FIELD_ATTRIB_BLOCK:
- case AML_FIELD_ATTRIB_BLOCK_CALL:
- default:
-
- length = ACPI_GSBUS_BUFFER_SIZE - 2;
- break;
+ return (AE_AML_PROTOCOL);
}
- return (length);
+ *return_length = acpi_protocol_lengths[protocol_id];
+ return (AE_OK);
}
/*******************************************************************************
@@ -87,7 +96,8 @@
* RETURN: Status
*
* DESCRIPTION: Read from a named field. Returns either an Integer or a
- * Buffer, depending on the size of the field.
+ * Buffer, depending on the size of the field and whether if a
+ * field is created by the create_field() operator.
*
******************************************************************************/
@@ -98,10 +108,8 @@
{
acpi_status status;
union acpi_operand_object *buffer_desc;
- acpi_size length;
void *buffer;
- u32 function;
- u16 accessor_type;
+ u32 buffer_length;
ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc);
@@ -132,60 +140,11 @@
ACPI_ADR_SPACE_GSBUS
|| obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_IPMI)) {
- /*
- * This is an SMBus, GSBus or IPMI read. We must create a buffer to
- * hold the data and then directly access the region handler.
- *
- * Note: SMBus and GSBus protocol value is passed in upper 16-bits
- * of Function
- */
- if (obj_desc->field.region_obj->region.space_id ==
- ACPI_ADR_SPACE_SMBUS) {
- length = ACPI_SMBUS_BUFFER_SIZE;
- function =
- ACPI_READ | (obj_desc->field.attribute << 16);
- } else if (obj_desc->field.region_obj->region.space_id ==
- ACPI_ADR_SPACE_GSBUS) {
- accessor_type = obj_desc->field.attribute;
- length =
- acpi_ex_get_serial_access_length(accessor_type,
- obj_desc->field.
- access_length);
- /*
- * Add additional 2 bytes for the generic_serial_bus data buffer:
- *
- * Status; (Byte 0 of the data buffer)
- * Length; (Byte 1 of the data buffer)
- * Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
- */
- length += 2;
- function = ACPI_READ | (accessor_type << 16);
- } else { /* IPMI */
+ /* SMBus, GSBus, IPMI serial */
- length = ACPI_IPMI_BUFFER_SIZE;
- function = ACPI_READ;
- }
-
- buffer_desc = acpi_ut_create_buffer_object(length);
- if (!buffer_desc) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- /* Lock entire transaction if requested */
-
- acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
-
- /* Call the region handler for the read */
-
- status = acpi_ex_access_region(obj_desc, 0,
- ACPI_CAST_PTR(u64,
- buffer_desc->
- buffer.pointer),
- function);
-
- acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
- goto exit;
+ status = acpi_ex_read_serial_bus(obj_desc, ret_buffer_desc);
+ return_ACPI_STATUS(status);
}
/*
@@ -196,16 +155,21 @@
* the use of arithmetic operators on the returned value if the
* field size is equal or smaller than an Integer.
*
+ * However, all buffer fields created by create_field operator needs to
+ * remain as a buffer to match other AML interpreter implementations.
+ *
* Note: Field.length is in bits.
*/
- length =
+ buffer_length =
(acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length);
- if (length > acpi_gbl_integer_byte_width) {
+ if (buffer_length > acpi_gbl_integer_byte_width ||
+ (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD &&
+ obj_desc->buffer_field.is_create_field)) {
/* Field is too large for an Integer, create a Buffer instead */
- buffer_desc = acpi_ut_create_buffer_object(length);
+ buffer_desc = acpi_ut_create_buffer_object(buffer_length);
if (!buffer_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
@@ -218,47 +182,43 @@
return_ACPI_STATUS(AE_NO_MEMORY);
}
- length = acpi_gbl_integer_byte_width;
+ buffer_length = acpi_gbl_integer_byte_width;
buffer = &buffer_desc->integer.value;
}
if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
(obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_GPIO)) {
+
+ /* General Purpose I/O */
+
+ status = acpi_ex_read_gpio(obj_desc, buffer);
+ goto exit;
+ } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+ (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_PLATFORM_COMM)) {
/*
- * For GPIO (general_purpose_io), the Address will be the bit offset
- * from the previous Connection() operator, making it effectively a
- * pin number index. The bit_length is the length of the field, which
- * is thus the number of pins.
+ * Reading from a PCC field unit does not require the handler because
+ * it only requires reading from the internal_pcc_buffer.
*/
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
- "GPIO FieldRead [FROM]: Pin %u Bits %u\n",
- obj_desc->field.pin_number_index,
+ "PCC FieldRead bits %u\n",
obj_desc->field.bit_length));
- /* Lock entire transaction if requested */
+ memcpy(buffer,
+ obj_desc->field.region_obj->field.internal_pcc_buffer +
+ obj_desc->field.base_byte_offset,
+ (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.
+ bit_length));
- acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
-
- /* Perform the write */
-
- status =
- acpi_ex_access_region(obj_desc, 0, (u64 *)buffer,
- ACPI_READ);
-
- acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
- if (ACPI_FAILURE(status)) {
- acpi_ut_remove_reference(buffer_desc);
- } else {
- *ret_buffer_desc = buffer_desc;
- }
- return_ACPI_STATUS(status);
+ *ret_buffer_desc = buffer_desc;
+ return AE_OK;
}
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n",
obj_desc, obj_desc->common.type, buffer,
- (u32) length));
+ buffer_length));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n",
obj_desc->common_field.bit_length,
@@ -271,7 +231,7 @@
/* Read from the field */
- status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length);
+ status = acpi_ex_extract_from_field(obj_desc, buffer, buffer_length);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
exit:
@@ -304,11 +264,9 @@
union acpi_operand_object **result_desc)
{
acpi_status status;
- u32 length;
+ u32 buffer_length;
+ u32 data_length;
void *buffer;
- union acpi_operand_object *buffer_desc;
- u32 function;
- u16 accessor_type;
ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc);
@@ -331,131 +289,59 @@
}
} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
(obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_GPIO)) {
+
+ /* General Purpose I/O */
+
+ status = acpi_ex_write_gpio(source_desc, obj_desc, result_desc);
+ return_ACPI_STATUS(status);
+ } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+ (obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_SMBUS
|| obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_GSBUS
|| obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_IPMI)) {
- /*
- * This is an SMBus, GSBus or IPMI write. We will bypass the entire
- * field mechanism and handoff the buffer directly to the handler.
- * For these address spaces, the buffer is bi-directional; on a
- * write, return data is returned in the same buffer.
- *
- * Source must be a buffer of sufficient size:
- * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or
- * ACPI_IPMI_BUFFER_SIZE.
- *
- * Note: SMBus and GSBus protocol type is passed in upper 16-bits
- * of Function
- */
- if (source_desc->common.type != ACPI_TYPE_BUFFER) {
- ACPI_ERROR((AE_INFO,
- "SMBus/IPMI/GenericSerialBus write requires "
- "Buffer, found type %s",
- acpi_ut_get_object_type_name(source_desc)));
- return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
- }
+ /* SMBus, GSBus, IPMI serial */
- if (obj_desc->field.region_obj->region.space_id ==
- ACPI_ADR_SPACE_SMBUS) {
- length = ACPI_SMBUS_BUFFER_SIZE;
- function =
- ACPI_WRITE | (obj_desc->field.attribute << 16);
- } else if (obj_desc->field.region_obj->region.space_id ==
- ACPI_ADR_SPACE_GSBUS) {
- accessor_type = obj_desc->field.attribute;
- length =
- acpi_ex_get_serial_access_length(accessor_type,
- obj_desc->field.
- access_length);
-
- /*
- * Add additional 2 bytes for the generic_serial_bus data buffer:
- *
- * Status; (Byte 0 of the data buffer)
- * Length; (Byte 1 of the data buffer)
- * Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
- */
- length += 2;
- function = ACPI_WRITE | (accessor_type << 16);
- } else { /* IPMI */
-
- length = ACPI_IPMI_BUFFER_SIZE;
- function = ACPI_WRITE;
- }
-
- if (source_desc->buffer.length < length) {
- ACPI_ERROR((AE_INFO,
- "SMBus/IPMI/GenericSerialBus write requires "
- "Buffer of length %u, found length %u",
- length, source_desc->buffer.length));
-
- return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
- }
-
- /* Create the bi-directional buffer */
-
- buffer_desc = acpi_ut_create_buffer_object(length);
- if (!buffer_desc) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- buffer = buffer_desc->buffer.pointer;
- memcpy(buffer, source_desc->buffer.pointer, length);
-
- /* Lock entire transaction if requested */
-
- acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
-
- /*
- * Perform the write (returns status and perhaps data in the
- * same buffer)
- */
status =
- acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, function);
- acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
-
- *result_desc = buffer_desc;
+ acpi_ex_write_serial_bus(source_desc, obj_desc,
+ result_desc);
return_ACPI_STATUS(status);
} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
(obj_desc->field.region_obj->region.space_id ==
- ACPI_ADR_SPACE_GPIO)) {
+ ACPI_ADR_SPACE_PLATFORM_COMM)) {
/*
- * For GPIO (general_purpose_io), we will bypass the entire field
- * mechanism and handoff the bit address and bit width directly to
- * the handler. The Address will be the bit offset
- * from the previous Connection() operator, making it effectively a
- * pin number index. The bit_length is the length of the field, which
- * is thus the number of pins.
+ * According to the spec a write to the COMD field will invoke the
+ * region handler. Otherwise, write to the pcc_internal buffer. This
+ * implementation will use the offsets specified rather than the name
+ * of the field. This is considered safer because some firmware tools
+ * are known to obfiscate named objects.
*/
- if (source_desc->common.type != ACPI_TYPE_INTEGER) {
- return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+ data_length =
+ (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.
+ bit_length);
+ memcpy(obj_desc->field.region_obj->field.internal_pcc_buffer +
+ obj_desc->field.base_byte_offset,
+ source_desc->buffer.pointer, data_length);
+
+ if (MASTER_SUBSPACE_COMMAND(obj_desc->field.base_byte_offset)) {
+
+ /* Perform the write */
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "PCC COMD field has been written. Invoking PCC handler now.\n"));
+
+ status =
+ acpi_ex_access_region(obj_desc, 0,
+ (u64 *)obj_desc->field.
+ region_obj->field.
+ internal_pcc_buffer,
+ ACPI_WRITE);
+ return_ACPI_STATUS(status);
}
-
- ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
- "GPIO FieldWrite [FROM]: (%s:%X), Val %.8X [TO]: Pin %u Bits %u\n",
- acpi_ut_get_type_name(source_desc->common.
- type),
- source_desc->common.type,
- (u32)source_desc->integer.value,
- obj_desc->field.pin_number_index,
- obj_desc->field.bit_length));
-
- buffer = &source_desc->integer.value;
-
- /* Lock entire transaction if requested */
-
- acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
-
- /* Perform the write */
-
- status =
- acpi_ex_access_region(obj_desc, 0, (u64 *)buffer,
- ACPI_WRITE);
- acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
- return_ACPI_STATUS(status);
+ return (AE_OK);
}
/* Get a pointer to the data to be written */
@@ -464,23 +350,22 @@
case ACPI_TYPE_INTEGER:
buffer = &source_desc->integer.value;
- length = sizeof(source_desc->integer.value);
+ buffer_length = sizeof(source_desc->integer.value);
break;
case ACPI_TYPE_BUFFER:
buffer = source_desc->buffer.pointer;
- length = source_desc->buffer.length;
+ buffer_length = source_desc->buffer.length;
break;
case ACPI_TYPE_STRING:
buffer = source_desc->string.pointer;
- length = source_desc->string.length;
+ buffer_length = source_desc->string.length;
break;
default:
-
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -488,7 +373,7 @@
"FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n",
source_desc,
acpi_ut_get_type_name(source_desc->common.type),
- source_desc->common.type, buffer, length));
+ source_desc->common.type, buffer, buffer_length));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n",
@@ -505,8 +390,7 @@
/* Write to the field */
- status = acpi_ex_insert_into_field(obj_desc, buffer, length);
+ status = acpi_ex_insert_into_field(obj_desc, buffer, buffer_length);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
-
return_ACPI_STATUS(status);
}
--
Gitblit v1.6.2