From 50a212ec906f7524620675f0c57357691c26c81f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 16 Oct 2024 01:20:19 +0000
Subject: [PATCH] 修改GPIO导出默认初始值
---
kernel/arch/arm/boot/dts/sun8i-r40.dtsi | 376 ++++++++++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 355 insertions(+), 21 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/sun8i-r40.dtsi b/kernel/arch/arm/boot/dts/sun8i-r40.dtsi
index 5f547c1..7907569 100644
--- a/kernel/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/kernel/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -44,8 +44,10 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
#include <dt-bindings/reset/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
@@ -61,6 +63,7 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
+ clock-accuracy = <50000>;
clock-output-names = "osc24M";
};
@@ -68,7 +71,8 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
- clock-output-names = "osc32k";
+ clock-accuracy = <20000>;
+ clock-output-names = "ext-osc32k";
};
};
@@ -76,25 +80,25 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
@@ -107,6 +111,22 @@
status = "disabled";
};
+ thermal-zones {
+ cpu_thermal: cpu0-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
+
+ gpu_thermal: gpu-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -116,11 +136,11 @@
display_clocks: clock@1000000 {
compatible = "allwinner,sun8i-r40-de2-clk",
"allwinner,sun8i-h3-de2-clk";
- reg = <0x01000000 0x100000>;
- clocks = <&ccu CLK_DE>,
- <&ccu CLK_BUS_DE>;
- clock-names = "mod",
- "bus";
+ reg = <0x01000000 0x10000>;
+ clocks = <&ccu CLK_BUS_DE>,
+ <&ccu CLK_DE>;
+ clock-names = "bus",
+ "mod";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -170,12 +190,98 @@
};
};
+ syscon: system-control@1c00000 {
+ compatible = "allwinner,sun8i-r40-system-control",
+ "allwinner,sun4i-a10-system-control";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_c: sram@1d00000 {
+ compatible = "mmio-sram";
+ reg = <0x01d00000 0xd0000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x01d00000 0xd0000>;
+
+ ve_sram: sram-section@0 {
+ compatible = "allwinner,sun8i-r40-sram-c1",
+ "allwinner,sun4i-a10-sram-c1";
+ reg = <0x000000 0x80000>;
+ };
+ };
+ };
+
nmi_intc: interrupt-controller@1c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01c00030 0x0c>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun8i-r40-dma",
+ "allwinner,sun50i-a64-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ dma-channels = <16>;
+ dma-requests = <31>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
+ spi0: spi@1c05000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@1c06000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ csi0: csi@1c09000 {
+ compatible = "allwinner,sun8i-r40-csi0",
+ "allwinner,sun7i-a20-csi0";
+ reg = <0x01c09000 0x1000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_DRAM_CSI0>;
+ clock-names = "bus", "isp", "ram";
+ resets = <&ccu RST_BUS_CSI0>;
+ interconnects = <&mbus 5>;
+ interconnect-names = "dma-mem";
+ status = "disabled";
+ };
+
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun8i-r40-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
};
mmc0: mmc@1c0f000 {
@@ -264,6 +370,38 @@
#phy-cells = <1>;
};
+ crypto: crypto@1c15000 {
+ compatible = "allwinner,sun8i-r40-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_CE>;
+ };
+
+ spi2: spi@1c17000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ahci: sata@1c18000 {
+ compatible = "allwinner,sun8i-r40-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+ resets = <&ccu RST_BUS_SATA>;
+ reset-names = "ahci";
+ status = "disabled";
+ };
+
ehci1: usb@1c19000 {
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
reg = <0x01c19000 0x100>;
@@ -310,25 +448,66 @@
status = "disabled";
};
+ spi3: spi@1c1f000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c1f000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
+ clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
+ };
+
+ rtc: rtc@1c20400 {
+ compatible = "allwinner,sun8i-r40-rtc";
+ reg = <0x01c20400 0x400>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clock-output-names = "osc32k", "osc32k-out";
+ clocks = <&osc32k>;
+ #clock-cells = <1>;
};
pio: pinctrl@1c20800 {
compatible = "allwinner,sun8i-r40-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
+
+ clk_out_a_pin: clk-out-a-pin {
+ pins = "PI12";
+ function = "clk_out_a";
+ };
+
+ /omit-if-no-ref/
+ csi0_8bits_pins: csi0-8bits-pins {
+ pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+ "PE6", "PE7", "PE8", "PE9", "PE10",
+ "PE11";
+ function = "csi0";
+ };
+
+ /omit-if-no-ref/
+ csi0_mclk_pin: csi0-mclk-pin {
+ pins = "PE1";
+ function = "csi0";
+ };
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
@@ -346,6 +525,36 @@
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
+ };
+
+ i2c1_pins: i2c1-pins {
+ pins = "PB18", "PB19";
+ function = "i2c1";
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins = "PB20", "PB21";
+ function = "i2c2";
+ };
+
+ i2c3_pins: i2c3-pins {
+ pins = "PI0", "PI1";
+ function = "i2c3";
+ };
+
+ i2c4_pins: i2c4-pins {
+ pins = "PI2", "PI3";
+ function = "i2c4";
+ };
+
+ ir0_pins: ir0-pins {
+ pins = "PB4";
+ function = "ir0";
+ };
+
+ ir1_pins: ir1-pins {
+ pins = "PB23";
+ function = "ir1";
};
mmc0_pins: mmc0-pins {
@@ -373,15 +582,94 @@
bias-pull-up;
};
+ /omit-if-no-ref/
+ spi0_pc_pins: spi0-pc-pins {
+ pins = "PC0", "PC1", "PC2";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
+ spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+ pins = "PC23";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
+ spi1_pi_pins: spi1-pi-pins {
+ pins = "PI17", "PI18", "PI19";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+ pins = "PI16";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+ pins = "PI15";
+ function = "spi1";
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
+ };
+
+ uart3_pg_pins: uart3-pg-pins {
+ pins = "PG6", "PG7";
+ function = "uart3";
+ };
+
+ uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
+ pins = "PG8", "PG9";
+ function = "uart3";
};
};
wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ ir0: ir@1c21800 {
+ compatible = "allwinner,sun8i-r40-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x01c21800 0x400>;
+ pinctrl-0 = <&ir0_pins>;
+ pinctrl-names = "default";
+ clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
+ clock-names = "apb", "ir";
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_IR0>;
+ status = "disabled";
+ };
+
+ ir1: ir@1c21c00 {
+ compatible = "allwinner,sun8i-r40-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x01c21c00 0x400>;
+ pinctrl-0 = <&ir1_pins>;
+ pinctrl-names = "default";
+ clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
+ clock-names = "apb", "ir";
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_IR1>;
+ status = "disabled";
+ };
+
+ ths: thermal-sensor@1c24c00 {
+ compatible = "allwinner,sun8i-r40-ths";
+ reg = <0x01c24c00 0x100>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ /* TODO: add nvmem-cells for calibration */
+ #thermal-sensor-cells = <1>;
};
uart0: serial@1c28000 {
@@ -491,6 +779,8 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -502,6 +792,8 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -513,6 +805,8 @@
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C3>;
resets = <&ccu RST_BUS_I2C3>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -524,9 +818,33 @@
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C4>;
resets = <&ccu RST_BUS_I2C4>;
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ };
+
+ mali: gpu@1c40000 {
+ compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
+ reg = <0x01c40000 0x10000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pmu";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
};
gmac: ethernet@1c50000 {
@@ -546,6 +864,16 @@
#address-cells = <1>;
#size-cells = <0>;
};
+ };
+
+ mbus: dram-controller@1c62000 {
+ compatible = "allwinner,sun8i-r40-mbus";
+ reg = <0x01c62000 0x1000>;
+ clocks = <&ccu 155>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x00000000 0x40000000 0x80000000>;
+ #interconnect-cells = <1>;
};
tcon_top: tcon-top@1c70000 {
@@ -574,12 +902,9 @@
#size-cells = <0>;
tcon_top_mixer0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- tcon_top_mixer0_in_mixer0: endpoint@0 {
- reg = <0>;
+ tcon_top_mixer0_in_mixer0: endpoint {
remote-endpoint = <&mixer0_out_tcon_top>;
};
};
@@ -673,7 +998,7 @@
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c73000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+ clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV0>;
reset-names = "lcd";
@@ -716,7 +1041,7 @@
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c74000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
+ clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV1>;
reset-names = "lcd";
@@ -758,7 +1083,7 @@
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
@@ -778,7 +1103,7 @@
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
- phy-names = "hdmi-phy";
+ phy-names = "phy";
status = "disabled";
ports {
@@ -803,7 +1128,7 @@
compatible = "allwinner,sun8i-r40-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
- <&ccu 7>, <&ccu 16>;
+ <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
clock-names = "bus", "mod", "pll-0", "pll-1";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
@@ -811,6 +1136,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--
Gitblit v1.6.2