From 50a212ec906f7524620675f0c57357691c26c81f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 16 Oct 2024 01:20:19 +0000
Subject: [PATCH] 修改GPIO导出默认初始值

---
 kernel/arch/arm/boot/dts/sun8i-r16-parrot.dts |   52 +++++-----------------------------------------------
 1 files changed, 5 insertions(+), 47 deletions(-)

diff --git a/kernel/arch/arm/boot/dts/sun8i-r16-parrot.dts b/kernel/arch/arm/boot/dts/sun8i-r16-parrot.dts
index 472c03b..4f48eec 100644
--- a/kernel/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/kernel/arch/arm/boot/dts/sun8i-r16-parrot.dts
@@ -63,8 +63,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_parrot>;
 
 		led1 {
 			label = "parrot:led1:usr";
@@ -97,8 +95,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	/*
@@ -111,14 +107,14 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@0 {
+	button-190 {
 		label = "V+";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <190000>;
 	};
 
-	button@1 {
+	button-390 {
 		label = "V-";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -128,8 +124,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;
 	vmmc-supply = <&reg_dcdc1>;
 	cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
 	bus-width = <4>;
@@ -138,7 +132,7 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -158,42 +152,10 @@
 
 &mmc2_8bit_pins {
 	drive-strength = <40>;
-	bias-pull-up;
 };
 
 &ohci0 {
 	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
-		pins = "PD14";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_parrot: led_pins@0 {
-		pins = "PE16", "PE17";
-		function = "gpio_out";
-	};
-
-	usb0_id_det: usb0_id_detect_pin@0 {
-		pins = "PD10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
-		pins = "PD12";
-		function = "gpio_out";
-	};
-};
-
-&r_pio {
-	wifi_reset_pin_parrot: wifi_reset_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
 };
 
 &r_rsb {
@@ -319,8 +281,6 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_parrot>;
 	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
 	status = "okay";
 };
@@ -331,7 +291,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -346,10 +306,8 @@
 
 &usbphy {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_det>;
 	usb0_vbus-supply = <&reg_drivevbus>;
-	usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
+	usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 };

--
Gitblit v1.6.2