From 50a212ec906f7524620675f0c57357691c26c81f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 16 Oct 2024 01:20:19 +0000
Subject: [PATCH] 修改GPIO导出默认初始值

---
 kernel/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts |   49 +++++--------------------------------------------
 1 files changed, 5 insertions(+), 44 deletions(-)

diff --git a/kernel/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/kernel/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index 8202c87..6a66b04 100644
--- a/kernel/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/kernel/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -63,8 +63,6 @@
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_enable_pin>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
 	};
 
@@ -74,8 +72,6 @@
 };
 
 &codec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&codec_pa_pin>;
 	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
 	status = "okay";
 };
@@ -93,8 +89,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -107,14 +101,10 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	gt911: touchscreen@5d {
@@ -122,8 +112,6 @@
 		reg = <0x5d>;
 		interrupt-parent = <&pio>;
 		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_reset_pin>;
 		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
 		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
 		touchscreen-swapped-x-y;
@@ -134,14 +122,14 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@571 {
+	button-571 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <571428>;
 	};
 
-	button@761 {
+	button-761 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -150,8 +138,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -170,32 +156,9 @@
 	status = "okay";
 };
 
-&pio {
-	bl_enable_pin: bl_enable_pin@0 {
-		pins = "PH7";
-		function = "gpio_out";
-	};
-
-	codec_pa_pin: codec_pa_pin@0 {
-		pins = "PH15";
-		function = "gpio_out";
-	};
-
-	ts_reset_pin: ts_reset_pin@0 {
-		pins = "PB13";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -238,7 +201,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -252,9 +215,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;

--
Gitblit v1.6.2