From 50a212ec906f7524620675f0c57357691c26c81f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 16 Oct 2024 01:20:19 +0000
Subject: [PATCH] 修改GPIO导出默认初始值
---
kernel/arch/arm/boot/dts/exynos3250-rinato.dts | 67 ++++++++++++++++++++++++++++++---
1 files changed, 60 insertions(+), 7 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/exynos3250-rinato.dts b/kernel/arch/arm/boot/dts/exynos3250-rinato.dts
index 29df4cf..bbf01f7 100644
--- a/kernel/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/kernel/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -30,7 +30,7 @@
memory@40000000 {
device_type = "memory";
- reg = <0x40000000 0x1ff00000>;
+ reg = <0x40000000 0x1ff00000>;
};
firmware@205f000 {
@@ -50,9 +50,15 @@
};
};
+ wlan_pwrseq: mshc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+ };
+
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
@@ -116,11 +122,13 @@
cooling-maps {
map0 {
/* Corresponds to 500MHz */
- cooling-device = <&cpu0 5 5>;
+ cooling-device = <&cpu0 5 5>,
+ <&cpu1 5 5>;
};
map1 {
/* Corresponds to 200MHz */
- cooling-device = <&cpu0 8 8>;
+ cooling-device = <&cpu0 8 8>,
+ <&cpu1 8 8>;
};
};
};
@@ -197,6 +205,10 @@
status = "okay";
};
+&cmu {
+ clocks = <&xusbxti>;
+};
+
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
@@ -237,9 +249,14 @@
i80-if-timings {
cs-setup = <0>;
wr-setup = <0>;
- wr-act = <1>;
+ wr-active = <1>;
wr-hold = <0>;
};
+};
+
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
};
&i2c_0 {
@@ -598,8 +615,6 @@
};
&mshc_0 {
- #address-cells = <1>;
- #size-cells = <0>;
broken-cd;
non-removable;
cap-mmc-highspeed;
@@ -618,10 +633,48 @@
status = "okay";
};
+&mshc_1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ non-removable;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ samsung,dw-mshc-ciu-div = <1>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+ bus-width = <4>;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4334-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpx1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+};
+
&serial_0 {
assigned-clocks = <&cmu CLK_SCLK_UART0>;
assigned-clock-rates = <100000000>;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ max-speed = <3000000>;
+ shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+ clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
+ };
};
&serial_1 {
--
Gitblit v1.6.2