From 50a212ec906f7524620675f0c57357691c26c81f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 16 Oct 2024 01:20:19 +0000
Subject: [PATCH] 修改GPIO导出默认初始值
---
kernel/arch/arm/boot/dts/at91-sama5d3_xplained.dts | 50 ++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 42 insertions(+), 8 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/kernel/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 74440da..cc55d16 100644
--- a/kernel/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/kernel/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -1,13 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
*
* Copyright (C) 2014 Atmel,
* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
*/
/dts-v1/;
#include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "SAMA5D3 Xplained";
@@ -17,7 +17,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x10000000>;
};
@@ -57,6 +57,8 @@
};
spi0: spi@f0004000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_cs>;
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
};
@@ -129,7 +131,7 @@
};
macb0: ethernet@f0028000 {
- phy-mode = "rgmii";
+ phy-mode = "rgmii-rxid";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
@@ -169,6 +171,8 @@
};
spi1: spi@f8008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_cs>;
cs-gpios = <&pioC 25 0>;
status = "okay";
};
@@ -248,6 +252,26 @@
<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
+
+ pinctrl_gpio_leds: gpio_leds_default {
+ atmel,pins =
+ <AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi0_cs: spi0_cs_default {
+ atmel,pins =
+ <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi1_cs: spi1_cs_default {
+ atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+ atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
};
};
@@ -304,12 +328,17 @@
bootloader@40000 {
label = "bootloader";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- bootloaderenv@c0000 {
+ bootloaderenvred@100000 {
+ label = "bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
label = "bootloader env";
- reg = <0xc0000 0xc0000>;
+ reg = <0x140000 0x40000>;
};
dtb@180000 {
@@ -334,6 +363,8 @@
vcc_mmc0_reg: fixedregulator_mmc0 {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
regulator-name = "mmc0-card-supply";
regulator-min-microvolt = <3300000>;
@@ -350,13 +381,16 @@
bp3 {
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+ status = "okay";
d2 {
label = "d2";
--
Gitblit v1.6.2