From 50a212ec906f7524620675f0c57357691c26c81f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 16 Oct 2024 01:20:19 +0000
Subject: [PATCH] 修改GPIO导出默认初始值
---
kernel/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 161 +++++++++++++++++++++++------------------------------
1 files changed, 71 insertions(+), 90 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/kernel/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index f37af91..0a53f21 100644
--- a/kernel/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/kernel/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
*
@@ -5,49 +6,12 @@
* 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
* 2017 Cristian Birsan <cristian.birsan@microchip.com>
* 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "at91-sama5d27_som1.dtsi"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Atmel SAMA5D27 SOM1 EK";
@@ -58,7 +22,7 @@
serial1 = &uart4; /* mikro BUS 1 */
serial2 = &uart2; /* mikro BUS 2 */
i2c1 = &i2c1;
- i2c2 = &i2c2;
+ i2c2 = &i2c3;
};
chosen {
@@ -90,6 +54,7 @@
sdmmc0: sdio-host@a0000000 {
bus-width = <8>;
+ mmc-ddr-3_3v;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
status = "okay";
@@ -106,6 +71,10 @@
isc: isc@f0008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+ };
+
+ qspi1: spi@f0024000 {
+ status = "okay";
};
spi0: spi@f8000000 {
@@ -156,24 +125,19 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
- i2c2: i2c@600 {
- compatible = "atmel,sama5d2-i2c";
- reg = <0x600 0x200>;
- interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+ i2c3: i2c@600 {
dmas = <0>, <0>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&flx1_clk>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
- atmel,fifo-size = <16>;
status = "okay";
};
};
shdwc@f8048010 {
- atmel,shdwc-debouncer = <976>;
+ debounce-delay-us = <976>;
atmel,wakeup-rtc-timer;
input@0 {
@@ -206,27 +170,17 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
status = "disabled";
- uart7: serial@200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0x200 0x200>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx3_clk>;
- clock-names = "usart";
+ uart8: serial@200 {
+ dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
- atmel,fifo-size = <32>;
status = "disabled"; /* Conflict with isc. */
};
- spi2: spi@400 {
- compatible = "atmel,at91rm9200-spi";
- reg = <0x400 0x200>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx3_clk>;
- clock-names = "spi_clk";
+ spi5: spi@400 {
+ dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
- atmel,fifo-size = <16>;
status = "disabled"; /* Conflict with isc. */
};
};
@@ -235,51 +189,43 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
status = "okay";
- uart6: serial@200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0x200 0x200>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx4_clk>;
- clock-names = "usart";
+ uart9: serial@200 {
+ dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
- atmel,fifo-size = <32>;
- status = "disabled"; /* Conflict with spi3 and i2c3. */
+ status = "disabled"; /* Conflict with spi6 and i2c6. */
};
- spi3: spi@400 {
- compatible = "atmel,at91rm9200-spi";
- reg = <0x400 0x200>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx4_clk>;
- clock-names = "spi_clk";
+ spi6: spi@400 {
+ dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
- atmel,fifo-size = <16>;
- status = "okay"; /* Conflict with uart6 and i2c3. */
+ status = "okay"; /* Conflict with uart5 and i2c6. */
};
- i2c3: i2c@600 {
- compatible = "atmel,sama5d2-i2c";
- reg = <0x600 0x200>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ i2c6: i2c@600 {
dmas = <0>, <0>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&flx4_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
- atmel,fifo-size = <16>;
- status = "disabled"; /* Conflict with uart6 and spi3. */
+ status = "disabled"; /* Conflict with uart5 and spi6. */
};
};
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_default>;
status = "okay";
+ };
+
+ adc: adc@fc030000 {
+ vddana-supply = <&vddana>;
+ vref-supply = <&advref>;
+
+ status = "disabled";
};
pinctrl@fc038000 {
@@ -521,7 +467,7 @@
pb4 {
label = "USER";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
@@ -548,4 +494,39 @@
linux,default-trigger = "heartbeat";
};
};
+
+ vddin_3v3: fixed-regulator-vddin_3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDDIN_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ status = "okay";
+ };
+
+ vddana: fixed-regulator-vddana {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vddin_3v3>;
+ status = "okay";
+ };
+
+ advref: fixed-regulator-advref {
+ compatible = "regulator-fixed";
+
+ regulator-name = "advref";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vddana>;
+ status = "okay";
+ };
};
--
Gitblit v1.6.2