From 50a212ec906f7524620675f0c57357691c26c81f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 16 Oct 2024 01:20:19 +0000
Subject: [PATCH] 修改GPIO导出默认初始值
---
kernel/arch/arm/boot/dts/at91-cosino_mega2560.dts | 105 +++++++++++++++++++++++++---------------------------
1 files changed, 51 insertions(+), 54 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/at91-cosino_mega2560.dts b/kernel/arch/arm/boot/dts/at91-cosino_mega2560.dts
index c452654b8..04cb7be 100644
--- a/kernel/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/kernel/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at91-cosino_mega2560.dts - Device Tree file for Cosino board with
* Mega 2560 extension
@@ -8,8 +9,6 @@
* Derived from at91sam9g35ek.dts by:
* Copyright (C) 2012 Atmel,
* 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
*/
/dts-v1/;
@@ -18,61 +17,59 @@
/ {
model = "HCE Cosino Mega 2560";
compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+};
- ahb {
- apb {
- macb0: ethernet@f802c000 {
- phy-mode = "rmii";
- status = "okay";
- };
+&adc0 {
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+};
- adc0: adc@f804c000 {
- atmel,adc-ts-wires = <4>;
- atmel,adc-ts-pressure-threshold = <10000>;
- status = "okay";
- };
+&macb0 {
+ phy-mode = "rmii";
+ status = "okay";
+};
- rtc@fffffeb0 {
- status = "okay";
- };
+&mmc1 {
+ pinctrl-0 = <
+ &pinctrl_mmc1_slot0_clk_cmd_dat0
+ &pinctrl_mmc1_slot0_dat1_3>;
+ pinctrl-names = "default";
+ status = "okay";
- usart1: serial@f8020000 {
- status = "okay";
- };
-
- usart2: serial@f8024000 {
- status = "okay";
- };
-
- usb2: gadget@f803c000 {
- atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- mmc1: mmc@f000c000 {
- pinctrl-0 = <
- &pinctrl_mmc1_slot0_clk_cmd_dat0
- &pinctrl_mmc1_slot0_dat1_3>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- non-removable;
- };
- };
- };
-
- usb0: ohci@600000 {
- status = "okay";
- num-ports = <3>;
- atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
- &pioD 19 GPIO_ACTIVE_LOW
- &pioD 20 GPIO_ACTIVE_LOW
- >;
- };
-
- usb1: ehci@700000 {
- status = "okay";
- };
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ non-removable;
};
};
+
+&rtc {
+ status = "okay";
+};
+
+&usart1 {
+ status = "okay";
+};
+
+&usart2 {
+ status = "okay";
+};
+
+&usb0 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+ &pioD 19 GPIO_ACTIVE_LOW
+ &pioD 20 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
--
Gitblit v1.6.2