From 50a212ec906f7524620675f0c57357691c26c81f Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 16 Oct 2024 01:20:19 +0000
Subject: [PATCH] 修改GPIO导出默认初始值

---
 kernel/arch/arm/boot/dts/am57xx-cl-som-am57x.dts |   47 +++++++++++++++++++++++++----------------------
 1 files changed, 25 insertions(+), 22 deletions(-)

diff --git a/kernel/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/kernel/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 52ae8ee..d783d1f 100644
--- a/kernel/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/kernel/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -1,19 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Support for CompuLab CL-SOM-AM57x System-on-Module
  *
  * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
  */
 
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include "dra74x.dtsi"
+#include "am5728.dtsi"
 
 / {
 	model = "CompuLab CL-SOM-AM57x";
@@ -457,20 +454,20 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
@@ -530,7 +527,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <31 0>;
-		pendown-gpio = <&gpio1 31 0>;
+		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
@@ -549,30 +546,37 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_pins_default>;
 	pinctrl-1 = <&cpsw_pins_sleep>;
-	dual_emac;
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <0>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_pins_default>;
 	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &usb2_phy1 {
@@ -606,12 +610,11 @@
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };

--
Gitblit v1.6.2