From 37f49e37ab4cb5d0bc4c60eb5c6d4dd57db767bb Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:44:59 +0000
Subject: [PATCH] gmac get mac form eeprom
---
kernel/include/uapi/linux/batman_adv.h | 220 ++++++++++++++++++++++++++++++++++++++++++++++++------
1 files changed, 195 insertions(+), 25 deletions(-)
diff --git a/kernel/include/uapi/linux/batman_adv.h b/kernel/include/uapi/linux/batman_adv.h
index 324a0e1..bb0ae94 100644
--- a/kernel/include/uapi/linux/batman_adv.h
+++ b/kernel/include/uapi/linux/batman_adv.h
@@ -1,25 +1,7 @@
/* SPDX-License-Identifier: MIT */
-/* Copyright (C) 2016-2018 B.A.T.M.A.N. contributors:
+/* Copyright (C) 2016-2020 B.A.T.M.A.N. contributors:
*
* Matthias Schiffer
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
*/
#ifndef _UAPI_LINUX_BATMAN_ADV_H_
@@ -27,6 +9,7 @@
#define BATADV_NL_NAME "batadv"
+#define BATADV_NL_MCAST_GROUP_CONFIG "config"
#define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter"
/**
@@ -86,7 +69,7 @@
/**
* @BATADV_TT_CLIENT_TEMP: this global client has been detected to be
- * part of the network but no nnode has already announced it
+ * part of the network but no node has already announced it
*/
BATADV_TT_CLIENT_TEMP = (1 << 11),
};
@@ -136,6 +119,20 @@
* (i.e. querier is behind our own bridge segment)
*/
BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING = (1 << 4),
+};
+
+/**
+ * enum batadv_gw_modes - gateway mode of node
+ */
+enum batadv_gw_modes {
+ /** @BATADV_GW_MODE_OFF: gw mode disabled */
+ BATADV_GW_MODE_OFF,
+
+ /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */
+ BATADV_GW_MODE_CLIENT,
+
+ /** @BATADV_GW_MODE_SERVER: announce itself as gateway server */
+ BATADV_GW_MODE_SERVER,
};
/**
@@ -344,6 +341,146 @@
*/
BATADV_ATTR_MCAST_FLAGS_PRIV,
+ /**
+ * @BATADV_ATTR_VLANID: VLAN id on top of soft interface
+ */
+ BATADV_ATTR_VLANID,
+
+ /**
+ * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol
+ * messages of the mesh interface shall be aggregated or not.
+ */
+ BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+
+ /**
+ * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going
+ * from a wireless client to another wireless client will be silently
+ * dropped.
+ */
+ BATADV_ATTR_AP_ISOLATION_ENABLED,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MARK,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MASK,
+
+ /**
+ * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through
+ * the mesh will be sent using multiple interfaces at the same time.
+ */
+ BATADV_ATTR_BONDING_ENABLED,
+
+ /**
+ * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop
+ * avoidance feature is enabled. This feature detects and avoids loops
+ * between the mesh and devices bridged with the soft interface
+ */
+ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+
+ /**
+ * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed
+ * arp table feature is enabled. This feature uses a distributed hash
+ * table to answer ARP requests without flooding the request through
+ * the whole mesh.
+ */
+ BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+
+ /**
+ * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going
+ * through the mesh will be fragmented or silently discarded if the
+ * packet size exceeds the outgoing interface MTU.
+ */
+ BATADV_ATTR_FRAGMENTATION_ENABLED,
+
+ /**
+ * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which
+ * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+ * to 'server'.
+ */
+ BATADV_ATTR_GW_BANDWIDTH_DOWN,
+
+ /**
+ * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which
+ * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+ * to 'server'.
+ */
+ BATADV_ATTR_GW_BANDWIDTH_UP,
+
+ /**
+ * @BATADV_ATTR_GW_MODE: defines the state of the gateway features.
+ * Possible values are specified in enum batadv_gw_modes
+ */
+ BATADV_ATTR_GW_MODE,
+
+ /**
+ * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node
+ * will use to choose a gateway if gw_mode was set to 'client'.
+ */
+ BATADV_ATTR_GW_SEL_CLASS,
+
+ /**
+ * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied
+ * to an originator message's tq-field on every hop and/or per
+ * hard interface
+ */
+ BATADV_ATTR_HOP_PENALTY,
+
+ /**
+ * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
+ * should be send to the debug log/trace ring buffer
+ */
+ BATADV_ATTR_LOG_LEVEL,
+
+ /**
+ * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED: whether multicast
+ * optimizations should be replaced by simple broadcast-like flooding
+ * of multicast packets. If set to non-zero then all nodes in the mesh
+ * are going to use classic flooding for any multicast packet with no
+ * optimizations.
+ */
+ BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,
+
+ /**
+ * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using
+ * some magic to send fewer wifi packets but still the same content) is
+ * enabled or not.
+ */
+ BATADV_ATTR_NETWORK_CODING_ENABLED,
+
+ /**
+ * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in
+ * which batman sends its protocol messages.
+ */
+ BATADV_ATTR_ORIG_INTERVAL,
+
+ /**
+ * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in
+ * which batman emits probing packets for neighbor sensing (ELP).
+ */
+ BATADV_ATTR_ELP_INTERVAL,
+
+ /**
+ * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be
+ * used by B.A.T.M.A.N. V when estimating the link throughput using
+ * this interface. If the value is set to 0 then batman-adv will try to
+ * estimate the throughput by itself.
+ */
+ BATADV_ATTR_THROUGHPUT_OVERRIDE,
+
+ /**
+ * @BATADV_ATTR_MULTICAST_FANOUT: defines the maximum number of packet
+ * copies that may be generated for a multicast-to-unicast conversion.
+ * Once this limit is exceeded distribution will fall back to broadcast.
+ */
+ BATADV_ATTR_MULTICAST_FANOUT,
+
/* add attributes above here, update the policy in netlink.c */
/**
@@ -372,10 +509,14 @@
BATADV_CMD_UNSPEC,
/**
- * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
- * device
+ * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh
*/
- BATADV_CMD_GET_MESH_INFO,
+ BATADV_CMD_GET_MESH,
+
+ /**
+ * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH
+ */
+ BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH,
/**
* @BATADV_CMD_TP_METER: Start a tp meter session
@@ -393,9 +534,15 @@
BATADV_CMD_GET_ROUTING_ALGOS,
/**
- * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
+ * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the
+ * current softif
*/
- BATADV_CMD_GET_HARDIFS,
+ BATADV_CMD_GET_HARDIF,
+
+ /**
+ * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF
+ */
+ BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF,
/**
* @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
@@ -443,6 +590,29 @@
*/
BATADV_CMD_GET_MCAST_FLAGS,
+ /**
+ * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh
+ */
+ BATADV_CMD_SET_MESH,
+
+ /**
+ * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the
+ * current softif
+ */
+ BATADV_CMD_SET_HARDIF,
+
+ /**
+ * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the
+ * current softif
+ */
+ BATADV_CMD_GET_VLAN,
+
+ /**
+ * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the
+ * current softif
+ */
+ BATADV_CMD_SET_VLAN,
+
/* add new commands above here */
/**
--
Gitblit v1.6.2