From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/drivers/usb/dwc3/core.c | 68 ++++++++++++++++------------------
1 files changed, 32 insertions(+), 36 deletions(-)
diff --git a/kernel/drivers/usb/dwc3/core.c b/kernel/drivers/usb/dwc3/core.c
index 20a7bc7..44a6f11 100644
--- a/kernel/drivers/usb/dwc3/core.c
+++ b/kernel/drivers/usb/dwc3/core.c
@@ -121,8 +121,12 @@
int ret;
int retries = 1000;
u32 reg;
+ u32 desired_dr_role;
mutex_lock(&dwc->mutex);
+ spin_lock_irqsave(&dwc->lock, flags);
+ desired_dr_role = dwc->desired_dr_role;
+ spin_unlock_irqrestore(&dwc->lock, flags);
pm_runtime_get_sync(dwc->dev);
@@ -141,13 +145,13 @@
if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_OTG)
dwc3_otg_update(dwc, 0);
- if (!dwc->desired_dr_role)
+ if (!desired_dr_role)
goto out;
- if (dwc->desired_dr_role == dwc->current_dr_role)
+ if (desired_dr_role == dwc->current_dr_role)
goto out;
- if (dwc->desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev)
+ if (desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev)
goto out;
switch (dwc->current_dr_role) {
@@ -175,7 +179,7 @@
*/
if (dwc->current_dr_role && ((DWC3_IP_IS(DWC3) ||
DWC3_VER_IS_PRIOR(DWC31, 190A)) &&
- dwc->desired_dr_role != DWC3_GCTL_PRTCAP_OTG)) {
+ desired_dr_role != DWC3_GCTL_PRTCAP_OTG)) {
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg |= DWC3_GCTL_CORESOFTRESET;
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
@@ -195,11 +199,11 @@
spin_lock_irqsave(&dwc->lock, flags);
- dwc3_set_prtcap(dwc, dwc->desired_dr_role);
+ dwc3_set_prtcap(dwc, desired_dr_role);
spin_unlock_irqrestore(&dwc->lock, flags);
- switch (dwc->desired_dr_role) {
+ switch (desired_dr_role) {
case DWC3_GCTL_PRTCAP_HOST:
ret = dwc3_host_init(dwc);
if (ret) {
@@ -303,9 +307,9 @@
/*
* We're resetting only the device side because, if we're in host mode,
* XHCI driver will reset the host block. If dwc3 was configured for
- * host-only mode, then we can return early.
+ * host-only mode or current role is host, then we can return early.
*/
- if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
+ if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
return 0;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -992,8 +996,13 @@
if (!dwc->ulpi_ready) {
ret = dwc3_core_ulpi_init(dwc);
- if (ret)
+ if (ret) {
+ if (ret == -ETIMEDOUT) {
+ dwc3_core_soft_reset(dwc);
+ ret = -EPROBE_DEFER;
+ }
goto err0;
+ }
dwc->ulpi_ready = true;
}
@@ -1104,27 +1113,12 @@
reg |= DWC3_GUCTL1_PARKMODE_DISABLE_HS;
#endif
- if (dwc->maximum_speed == USB_SPEED_HIGH ||
- dwc->maximum_speed == USB_SPEED_FULL)
+ if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) &&
+ (dwc->maximum_speed == USB_SPEED_HIGH ||
+ dwc->maximum_speed == USB_SPEED_FULL))
reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
- }
-
- if (dwc->dr_mode == USB_DR_MODE_HOST ||
- dwc->dr_mode == USB_DR_MODE_OTG) {
- reg = dwc3_readl(dwc->regs, DWC3_GUCTL);
-
- /*
- * Enable Auto retry Feature to make the controller operating in
- * Host mode on seeing transaction errors(CRC errors or internal
- * overrun scenerios) on IN transfers to reply to the device
- * with a non-terminating retry ACK (i.e, an ACK transcation
- * packet with Retry=1 & Nump != 0)
- */
- reg |= DWC3_GUCTL_HSTINAUTORETRY;
-
- dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
}
/*
@@ -1654,13 +1648,11 @@
spin_lock_init(&dwc->lock);
mutex_init(&dwc->mutex);
+ pm_runtime_get_noresume(dev);
pm_runtime_set_active(dev);
pm_runtime_use_autosuspend(dev);
pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY);
pm_runtime_enable(dev);
- ret = pm_runtime_get_sync(dev);
- if (ret < 0)
- goto err1;
pm_runtime_forbid(dev);
@@ -1729,12 +1721,10 @@
dwc3_free_event_buffers(dwc);
err2:
- pm_runtime_allow(&pdev->dev);
-
-err1:
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
+ pm_runtime_allow(dev);
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
disable_clks:
clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
assert_reset:
@@ -1758,8 +1748,14 @@
dwc3_core_exit(dwc);
dwc3_ulpi_exit(dwc);
+ pm_runtime_allow(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
+ /*
+ * HACK: Clear the driver data, which is currently accessed by parent
+ * glue drivers, before allowing the parent to suspend.
+ */
+ platform_set_drvdata(pdev, NULL);
pm_runtime_set_suspended(&pdev->dev);
dwc3_free_event_buffers(dwc);
--
Gitblit v1.6.2