From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/drivers/spi/spi-bcm63xx-hsspi.c | 19 +++++++++++++++----
1 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/kernel/drivers/spi/spi-bcm63xx-hsspi.c b/kernel/drivers/spi/spi-bcm63xx-hsspi.c
index 1f08d75..02f56fc 100644
--- a/kernel/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/kernel/drivers/spi/spi-bcm63xx-hsspi.c
@@ -21,6 +21,7 @@
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/reset.h>
+#include <linux/pm_runtime.h>
#define HSSPI_GLOBAL_CTRL_REG 0x0
#define GLOBAL_CTRL_CS_POLARITY_SHIFT 0
@@ -162,6 +163,7 @@
int step_size = HSSPI_BUFFER_LEN;
const u8 *tx = t->tx_buf;
u8 *rx = t->rx_buf;
+ u32 val = 0;
bcm63xx_hsspi_set_clk(bs, spi, t->speed_hz);
bcm63xx_hsspi_set_cs(bs, spi->chip_select, true);
@@ -177,11 +179,16 @@
step_size -= HSSPI_OPCODE_LEN;
if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) ||
- (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL))
+ (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL)) {
opcode |= HSSPI_OP_MULTIBIT;
- __raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT |
- 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff,
+ if (t->rx_nbits == SPI_NBITS_DUAL)
+ val |= 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT;
+ if (t->tx_nbits == SPI_NBITS_DUAL)
+ val |= 1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT;
+ }
+
+ __raw_writel(val | 0xff,
bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
while (pending > 0) {
@@ -439,13 +446,17 @@
if (ret)
goto out_put_master;
+ pm_runtime_enable(&pdev->dev);
+
/* register and we are done */
ret = devm_spi_register_master(dev, master);
if (ret)
- goto out_put_master;
+ goto out_pm_disable;
return 0;
+out_pm_disable:
+ pm_runtime_disable(&pdev->dev);
out_put_master:
spi_master_put(master);
out_disable_pll_clk:
--
Gitblit v1.6.2