From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/drivers/scsi/pm8001/pm8001_hwi.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/kernel/drivers/scsi/pm8001/pm8001_hwi.c b/kernel/drivers/scsi/pm8001/pm8001_hwi.c
index da9fbe6..2b20c6a 100644
--- a/kernel/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/kernel/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1881,7 +1881,7 @@
param);
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_GOOD;
+ ts->stat = SAS_SAM_STAT_GOOD;
} else {
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_PROTO_RESPONSE;
@@ -2341,7 +2341,7 @@
pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_GOOD;
+ ts->stat = SAS_SAM_STAT_GOOD;
/* check if response is for SEND READ LOG */
if (pm8001_dev &&
(pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
@@ -2864,7 +2864,7 @@
case IO_SUCCESS:
pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_GOOD;
+ ts->stat = SAS_SAM_STAT_GOOD;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
@@ -2891,17 +2891,17 @@
case IO_ERROR_HW_TIMEOUT:
pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_BUSY;
+ ts->stat = SAS_SAM_STAT_BUSY;
break;
case IO_XFER_ERROR_BREAK:
pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_BUSY;
+ ts->stat = SAS_SAM_STAT_BUSY;
break;
case IO_XFER_ERROR_PHY_NOT_READY:
pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_BUSY;
+ ts->stat = SAS_SAM_STAT_BUSY;
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
pm8001_dbg(pm8001_ha, IO,
@@ -3656,7 +3656,7 @@
case IO_SUCCESS:
pm8001_dbg(pm8001_ha, EH, "IO_SUCCESS\n");
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_GOOD;
+ ts->stat = SAS_SAM_STAT_GOOD;
break;
case IO_NOT_VALID:
pm8001_dbg(pm8001_ha, EH, "IO_NOT_VALID\n");
@@ -4288,7 +4288,7 @@
spin_lock_irqsave(&task->task_state_lock, flags);
ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAM_STAT_GOOD;
+ ts->stat = SAS_SAM_STAT_GOOD;
task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
task->task_state_flags |= SAS_TASK_STATE_DONE;
@@ -4344,7 +4344,7 @@
payload.sas_identify.dev_type = SAS_END_DEVICE;
payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
memcpy(payload.sas_identify.sas_addr,
- pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+ &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE);
payload.sas_identify.phy_id = phy_id;
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload,
sizeof(payload), 0);
--
Gitblit v1.6.2