From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/drivers/rtc/rtc-snvs.c | 16 ++++++++++++++--
1 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/kernel/drivers/rtc/rtc-snvs.c b/kernel/drivers/rtc/rtc-snvs.c
index 0263d99..cc7f6c4 100644
--- a/kernel/drivers/rtc/rtc-snvs.c
+++ b/kernel/drivers/rtc/rtc-snvs.c
@@ -32,6 +32,14 @@
#define SNVS_LPPGDR_INIT 0x41736166
#define CNTR_TO_SECS_SH 15
+/* The maximum RTC clock cycles that are allowed to pass between two
+ * consecutive clock counter register reads. If the values are corrupted a
+ * bigger difference is expected. The RTC frequency is 32kHz. With 320 cycles
+ * we end at 10ms which should be enough for most cases. If it once takes
+ * longer than expected we do a retry.
+ */
+#define MAX_RTC_READ_DIFF_CYCLES 320
+
struct snvs_rtc_data {
struct rtc_device *rtc;
struct regmap *regmap;
@@ -56,6 +64,7 @@
static u32 rtc_read_lp_counter(struct snvs_rtc_data *data)
{
u64 read1, read2;
+ s64 diff;
unsigned int timeout = 100;
/* As expected, the registers might update between the read of the LSB
@@ -66,7 +75,8 @@
do {
read2 = read1;
read1 = rtc_read_lpsrt(data);
- } while (read1 != read2 && --timeout);
+ diff = read1 - read2;
+ } while (((diff < 0) || (diff > MAX_RTC_READ_DIFF_CYCLES)) && --timeout);
if (!timeout)
dev_err(&data->rtc->dev, "Timeout trying to get valid LPSRT Counter read\n");
@@ -78,13 +88,15 @@
static int rtc_read_lp_counter_lsb(struct snvs_rtc_data *data, u32 *lsb)
{
u32 count1, count2;
+ s32 diff;
unsigned int timeout = 100;
regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count1);
do {
count2 = count1;
regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count1);
- } while (count1 != count2 && --timeout);
+ diff = count1 - count2;
+ } while (((diff < 0) || (diff > MAX_RTC_READ_DIFF_CYCLES)) && --timeout);
if (!timeout) {
dev_err(&data->rtc->dev, "Timeout trying to get valid LPSRT Counter read\n");
return -ETIMEDOUT;
--
Gitblit v1.6.2