From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/drivers/pci/controller/pci-mvebu.c | 451 ++++++++++++++++---------------------------------------
1 files changed, 135 insertions(+), 316 deletions(-)
diff --git a/kernel/drivers/pci/controller/pci-mvebu.c b/kernel/drivers/pci/controller/pci-mvebu.c
index a41d79b..2dc6890 100644
--- a/kernel/drivers/pci/controller/pci-mvebu.c
+++ b/kernel/drivers/pci/controller/pci-mvebu.c
@@ -12,7 +12,6 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mbus.h>
-#include <linux/msi.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
@@ -22,6 +21,7 @@
#include <linux/of_platform.h>
#include "../pci.h"
+#include "../pci-bridge-emul.h"
/*
* PCIe unit register offsets.
@@ -63,69 +63,12 @@
#define PCIE_DEBUG_CTRL 0x1a60
#define PCIE_DEBUG_SOFT_RESET BIT(20)
-enum {
- PCISWCAP = PCI_BRIDGE_CONTROL + 2,
- PCISWCAP_EXP_LIST_ID = PCISWCAP + PCI_CAP_LIST_ID,
- PCISWCAP_EXP_DEVCAP = PCISWCAP + PCI_EXP_DEVCAP,
- PCISWCAP_EXP_DEVCTL = PCISWCAP + PCI_EXP_DEVCTL,
- PCISWCAP_EXP_LNKCAP = PCISWCAP + PCI_EXP_LNKCAP,
- PCISWCAP_EXP_LNKCTL = PCISWCAP + PCI_EXP_LNKCTL,
- PCISWCAP_EXP_SLTCAP = PCISWCAP + PCI_EXP_SLTCAP,
- PCISWCAP_EXP_SLTCTL = PCISWCAP + PCI_EXP_SLTCTL,
- PCISWCAP_EXP_RTCTL = PCISWCAP + PCI_EXP_RTCTL,
- PCISWCAP_EXP_RTSTA = PCISWCAP + PCI_EXP_RTSTA,
- PCISWCAP_EXP_DEVCAP2 = PCISWCAP + PCI_EXP_DEVCAP2,
- PCISWCAP_EXP_DEVCTL2 = PCISWCAP + PCI_EXP_DEVCTL2,
- PCISWCAP_EXP_LNKCAP2 = PCISWCAP + PCI_EXP_LNKCAP2,
- PCISWCAP_EXP_LNKCTL2 = PCISWCAP + PCI_EXP_LNKCTL2,
- PCISWCAP_EXP_SLTCAP2 = PCISWCAP + PCI_EXP_SLTCAP2,
- PCISWCAP_EXP_SLTCTL2 = PCISWCAP + PCI_EXP_SLTCTL2,
-};
-
-/* PCI configuration space of a PCI-to-PCI bridge */
-struct mvebu_sw_pci_bridge {
- u16 vendor;
- u16 device;
- u16 command;
- u16 status;
- u16 class;
- u8 interface;
- u8 revision;
- u8 bist;
- u8 header_type;
- u8 latency_timer;
- u8 cache_line_size;
- u32 bar[2];
- u8 primary_bus;
- u8 secondary_bus;
- u8 subordinate_bus;
- u8 secondary_latency_timer;
- u8 iobase;
- u8 iolimit;
- u16 secondary_status;
- u16 membase;
- u16 memlimit;
- u16 iobaseupper;
- u16 iolimitupper;
- u32 romaddr;
- u8 intline;
- u8 intpin;
- u16 bridgectrl;
-
- /* PCI express capability */
- u32 pcie_sltcap;
- u16 pcie_devctl;
- u16 pcie_rtctl;
-};
-
struct mvebu_pcie_port;
/* Structure representing all PCIe interfaces */
struct mvebu_pcie {
struct platform_device *pdev;
struct mvebu_pcie_port *ports;
- struct msi_controller *msi;
- struct list_head resources;
struct resource io;
struct resource realio;
struct resource mem;
@@ -153,12 +96,13 @@
struct clk *clk;
struct gpio_desc *reset_gpio;
char *reset_name;
- struct mvebu_sw_pci_bridge bridge;
+ struct pci_bridge_emul bridge;
struct device_node *dn;
struct mvebu_pcie *pcie;
struct mvebu_pcie_window memwin;
struct mvebu_pcie_window iowin;
u32 saved_pcie_stat;
+ struct resource regs;
};
static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
@@ -203,7 +147,9 @@
/*
* Setup PCIE BARs and Address Decode Wins:
- * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
+ * BAR[0] -> internal registers (needed for MSI)
+ * BAR[1] -> covers all DRAM banks
+ * BAR[2] -> Disabled
* WIN[0-3] -> DRAM bank[0-3]
*/
static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
@@ -257,6 +203,12 @@
mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
PCIE_BAR_CTRL_OFF(1));
+
+ /*
+ * Point BAR[0] to the device's internal registers.
+ */
+ mvebu_writel(port, round_down(port->regs.start, SZ_1M), PCIE_BAR_LO_OFF(0));
+ mvebu_writel(port, 0, PCIE_BAR_HI_OFF(0));
}
static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
@@ -415,11 +367,12 @@
static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
{
struct mvebu_pcie_window desired = {};
+ struct pci_bridge_emul_conf *conf = &port->bridge.conf;
/* Are the new iobase/iolimit values invalid? */
- if (port->bridge.iolimit < port->bridge.iobase ||
- port->bridge.iolimitupper < port->bridge.iobaseupper ||
- !(port->bridge.command & PCI_COMMAND_IO)) {
+ if (conf->iolimit < conf->iobase ||
+ conf->iolimitupper < conf->iobaseupper ||
+ !(conf->command & PCI_COMMAND_IO)) {
mvebu_pcie_set_window(port, port->io_target, port->io_attr,
&desired, &port->iowin);
return;
@@ -438,11 +391,11 @@
* specifications. iobase is the bus address, port->iowin_base
* is the CPU address.
*/
- desired.remap = ((port->bridge.iobase & 0xF0) << 8) |
- (port->bridge.iobaseupper << 16);
+ desired.remap = ((conf->iobase & 0xF0) << 8) |
+ (conf->iobaseupper << 16);
desired.base = port->pcie->io.start + desired.remap;
- desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
- (port->bridge.iolimitupper << 16)) -
+ desired.size = ((0xFFF | ((conf->iolimit & 0xF0) << 8) |
+ (conf->iolimitupper << 16)) -
desired.remap) +
1;
@@ -453,10 +406,11 @@
static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
{
struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
+ struct pci_bridge_emul_conf *conf = &port->bridge.conf;
/* Are the new membase/memlimit values invalid? */
- if (port->bridge.memlimit < port->bridge.membase ||
- !(port->bridge.command & PCI_COMMAND_MEMORY)) {
+ if (conf->memlimit < conf->membase ||
+ !(conf->command & PCI_COMMAND_MEMORY)) {
mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
&desired, &port->memwin);
return;
@@ -468,130 +422,32 @@
* window to setup, according to the PCI-to-PCI bridge
* specifications.
*/
- desired.base = ((port->bridge.membase & 0xFFF0) << 16);
- desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
+ desired.base = ((conf->membase & 0xFFF0) << 16);
+ desired.size = (((conf->memlimit & 0xFFF0) << 16) | 0xFFFFF) -
desired.base + 1;
mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
&port->memwin);
}
-/*
- * Initialize the configuration space of the PCI-to-PCI bridge
- * associated with the given PCIe interface.
- */
-static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port)
+static pci_bridge_emul_read_status_t
+mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
+ int reg, u32 *value)
{
- struct mvebu_sw_pci_bridge *bridge = &port->bridge;
+ struct mvebu_pcie_port *port = bridge->data;
- memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge));
-
- bridge->class = PCI_CLASS_BRIDGE_PCI;
- bridge->vendor = PCI_VENDOR_ID_MARVELL;
- bridge->device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
- bridge->revision = mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
- bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
- bridge->cache_line_size = 0x10;
-
- /* We support 32 bits I/O addressing */
- bridge->iobase = PCI_IO_RANGE_TYPE_32;
- bridge->iolimit = PCI_IO_RANGE_TYPE_32;
-
- /* Add capabilities */
- bridge->status = PCI_STATUS_CAP_LIST;
-}
-
-/*
- * Read the configuration space of the PCI-to-PCI bridge associated to
- * the given PCIe interface.
- */
-static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
- unsigned int where, int size, u32 *value)
-{
- struct mvebu_sw_pci_bridge *bridge = &port->bridge;
-
- switch (where & ~3) {
- case PCI_VENDOR_ID:
- *value = bridge->device << 16 | bridge->vendor;
- break;
-
- case PCI_COMMAND:
- *value = bridge->command | bridge->status << 16;
- break;
-
- case PCI_CLASS_REVISION:
- *value = bridge->class << 16 | bridge->interface << 8 |
- bridge->revision;
- break;
-
- case PCI_CACHE_LINE_SIZE:
- *value = bridge->bist << 24 | bridge->header_type << 16 |
- bridge->latency_timer << 8 | bridge->cache_line_size;
- break;
-
- case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
- *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4];
- break;
-
- case PCI_PRIMARY_BUS:
- *value = (bridge->secondary_latency_timer << 24 |
- bridge->subordinate_bus << 16 |
- bridge->secondary_bus << 8 |
- bridge->primary_bus);
- break;
-
- case PCI_IO_BASE:
- if (!mvebu_has_ioport(port))
- *value = bridge->secondary_status << 16;
- else
- *value = (bridge->secondary_status << 16 |
- bridge->iolimit << 8 |
- bridge->iobase);
- break;
-
- case PCI_MEMORY_BASE:
- *value = (bridge->memlimit << 16 | bridge->membase);
- break;
-
- case PCI_PREF_MEMORY_BASE:
- *value = 0;
- break;
-
- case PCI_IO_BASE_UPPER16:
- *value = (bridge->iolimitupper << 16 | bridge->iobaseupper);
- break;
-
- case PCI_CAPABILITY_LIST:
- *value = PCISWCAP;
- break;
-
- case PCI_ROM_ADDRESS1:
- *value = 0;
- break;
-
- case PCI_INTERRUPT_LINE:
- /* LINE PIN MIN_GNT MAX_LAT */
- *value = 0;
- break;
-
- case PCISWCAP_EXP_LIST_ID:
- /* Set PCIe v2, root port, slot support */
- *value = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
- PCI_EXP_FLAGS_SLOT) << 16 | PCI_CAP_ID_EXP;
- break;
-
- case PCISWCAP_EXP_DEVCAP:
+ switch (reg) {
+ case PCI_EXP_DEVCAP:
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
break;
- case PCISWCAP_EXP_DEVCTL:
+ case PCI_EXP_DEVCTL:
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
- *value |= bridge->pcie_devctl;
break;
- case PCISWCAP_EXP_LNKCAP:
+ case PCI_EXP_LNKCAP:
/*
* PCIe requires the clock power management capability to be
* hard-wired to zero for downstream ports
@@ -600,176 +456,148 @@
~PCI_EXP_LNKCAP_CLKPM;
break;
- case PCISWCAP_EXP_LNKCTL:
+ case PCI_EXP_LNKCTL:
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
break;
- case PCISWCAP_EXP_SLTCAP:
- *value = bridge->pcie_sltcap;
- break;
-
- case PCISWCAP_EXP_SLTCTL:
+ case PCI_EXP_SLTCTL:
*value = PCI_EXP_SLTSTA_PDS << 16;
break;
- case PCISWCAP_EXP_RTCTL:
- *value = bridge->pcie_rtctl;
- break;
-
- case PCISWCAP_EXP_RTSTA:
+ case PCI_EXP_RTSTA:
*value = mvebu_readl(port, PCIE_RC_RTSTA);
break;
- /* PCIe requires the v2 fields to be hard-wired to zero */
- case PCISWCAP_EXP_DEVCAP2:
- case PCISWCAP_EXP_DEVCTL2:
- case PCISWCAP_EXP_LNKCAP2:
- case PCISWCAP_EXP_LNKCTL2:
- case PCISWCAP_EXP_SLTCAP2:
- case PCISWCAP_EXP_SLTCTL2:
default:
- /*
- * PCI defines configuration read accesses to reserved or
- * unimplemented registers to read as zero and complete
- * normally.
- */
- *value = 0;
- return PCIBIOS_SUCCESSFUL;
+ return PCI_BRIDGE_EMUL_NOT_HANDLED;
}
- if (size == 2)
- *value = (*value >> (8 * (where & 3))) & 0xffff;
- else if (size == 1)
- *value = (*value >> (8 * (where & 3))) & 0xff;
-
- return PCIBIOS_SUCCESSFUL;
+ return PCI_BRIDGE_EMUL_HANDLED;
}
-/* Write to the PCI-to-PCI bridge configuration space */
-static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
- unsigned int where, int size, u32 value)
+static void
+mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
+ int reg, u32 old, u32 new, u32 mask)
{
- struct mvebu_sw_pci_bridge *bridge = &port->bridge;
- u32 mask, reg;
- int err;
+ struct mvebu_pcie_port *port = bridge->data;
+ struct pci_bridge_emul_conf *conf = &bridge->conf;
- if (size == 4)
- mask = 0x0;
- else if (size == 2)
- mask = ~(0xffff << ((where & 3) * 8));
- else if (size == 1)
- mask = ~(0xff << ((where & 3) * 8));
- else
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, ®);
- if (err)
- return err;
-
- value = (reg & mask) | value << ((where & 3) * 8);
-
- switch (where & ~3) {
+ switch (reg) {
case PCI_COMMAND:
{
- u32 old = bridge->command;
-
if (!mvebu_has_ioport(port))
- value &= ~PCI_COMMAND_IO;
+ conf->command &= ~PCI_COMMAND_IO;
- bridge->command = value & 0xffff;
- if ((old ^ bridge->command) & PCI_COMMAND_IO)
+ if ((old ^ new) & PCI_COMMAND_IO)
mvebu_pcie_handle_iobase_change(port);
- if ((old ^ bridge->command) & PCI_COMMAND_MEMORY)
+ if ((old ^ new) & PCI_COMMAND_MEMORY)
mvebu_pcie_handle_membase_change(port);
+
break;
}
-
- case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
- bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value;
- break;
case PCI_IO_BASE:
/*
- * We also keep bit 1 set, it is a read-only bit that
+ * We keep bit 1 set, it is a read-only bit that
* indicates we support 32 bits addressing for the
* I/O
*/
- bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32;
- bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32;
+ conf->iobase |= PCI_IO_RANGE_TYPE_32;
+ conf->iolimit |= PCI_IO_RANGE_TYPE_32;
mvebu_pcie_handle_iobase_change(port);
break;
case PCI_MEMORY_BASE:
- bridge->membase = value & 0xffff;
- bridge->memlimit = value >> 16;
mvebu_pcie_handle_membase_change(port);
break;
case PCI_IO_BASE_UPPER16:
- bridge->iobaseupper = value & 0xffff;
- bridge->iolimitupper = value >> 16;
mvebu_pcie_handle_iobase_change(port);
break;
case PCI_PRIMARY_BUS:
- bridge->primary_bus = value & 0xff;
- bridge->secondary_bus = (value >> 8) & 0xff;
- bridge->subordinate_bus = (value >> 16) & 0xff;
- bridge->secondary_latency_timer = (value >> 24) & 0xff;
- mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus);
+ mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus);
break;
- case PCISWCAP_EXP_DEVCTL:
+ default:
+ break;
+ }
+}
+
+static void
+mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
+ int reg, u32 old, u32 new, u32 mask)
+{
+ struct mvebu_pcie_port *port = bridge->data;
+
+ switch (reg) {
+ case PCI_EXP_DEVCTL:
/*
* Armada370 data says these bits must always
* be zero when in root complex mode.
*/
- value &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
- PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
+ new &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
+ PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
- /*
- * If the mask is 0xffff0000, then we only want to write
- * the device control register, rather than clearing the
- * RW1C bits in the device status register. Mask out the
- * status register bits.
- */
- if (mask == 0xffff0000)
- value &= 0xffff;
-
- mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
+ mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
break;
- case PCISWCAP_EXP_LNKCTL:
+ case PCI_EXP_LNKCTL:
/*
* If we don't support CLKREQ, we must ensure that the
* CLKREQ enable bit always reads zero. Since we haven't
* had this capability, and it's dependent on board wiring,
* disable it for the time being.
*/
- value &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
+ new &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
- /*
- * If the mask is 0xffff0000, then we only want to write
- * the link control register, rather than clearing the
- * RW1C bits in the link status register. Mask out the
- * RW1C status register bits.
- */
- if (mask == 0xffff0000)
- value &= ~((PCI_EXP_LNKSTA_LABS |
- PCI_EXP_LNKSTA_LBMS) << 16);
-
- mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
+ mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
break;
- case PCISWCAP_EXP_RTSTA:
- mvebu_writel(port, value, PCIE_RC_RTSTA);
- break;
-
- default:
+ case PCI_EXP_RTSTA:
+ mvebu_writel(port, new, PCIE_RC_RTSTA);
break;
}
+}
- return PCIBIOS_SUCCESSFUL;
+static struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
+ .write_base = mvebu_pci_bridge_emul_base_conf_write,
+ .read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
+ .write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
+};
+
+/*
+ * Initialize the configuration space of the PCI-to-PCI bridge
+ * associated with the given PCIe interface.
+ */
+static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
+{
+ struct pci_bridge_emul *bridge = &port->bridge;
+ u32 pcie_cap = mvebu_readl(port, PCIE_CAP_PCIEXP);
+ u8 pcie_cap_ver = ((pcie_cap >> 16) & PCI_EXP_FLAGS_VERS);
+
+ bridge->conf.vendor = PCI_VENDOR_ID_MARVELL;
+ bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
+ bridge->conf.class_revision =
+ mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
+
+ if (mvebu_has_ioport(port)) {
+ /* We support 32 bits I/O addressing */
+ bridge->conf.iobase = PCI_IO_RANGE_TYPE_32;
+ bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
+ }
+
+ /*
+ * Older mvebu hardware provides PCIe Capability structure only in
+ * version 1. New hardware provides it in version 2.
+ */
+ bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver);
+
+ bridge->has_pcie = true;
+ bridge->data = port;
+ bridge->ops = &mvebu_pci_bridge_emul_ops;
+
+ pci_bridge_emul_init(bridge, PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR);
}
static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
@@ -789,8 +617,8 @@
if (bus->number == 0 && port->devfn == devfn)
return port;
if (bus->number != 0 &&
- bus->number >= port->bridge.secondary_bus &&
- bus->number <= port->bridge.subordinate_bus)
+ bus->number >= port->bridge.conf.secondary_bus &&
+ bus->number <= port->bridge.conf.subordinate_bus)
return port;
}
@@ -811,7 +639,8 @@
/* Access the emulated PCI-to-PCI bridge */
if (bus->number == 0)
- return mvebu_sw_pci_bridge_write(port, where, size, val);
+ return pci_bridge_emul_conf_write(&port->bridge, where,
+ size, val);
if (!mvebu_pcie_link_up(port))
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -839,7 +668,8 @@
/* Access the emulated PCI-to-PCI bridge */
if (bus->number == 0)
- return mvebu_sw_pci_bridge_read(port, where, size, val);
+ return pci_bridge_emul_conf_read(&port->bridge, where,
+ size, val);
if (!mvebu_pcie_link_up(port)) {
*val = 0xffffffff;
@@ -892,14 +722,13 @@
struct device_node *np,
struct mvebu_pcie_port *port)
{
- struct resource regs;
int ret = 0;
- ret = of_address_to_resource(np, 0, ®s);
+ ret = of_address_to_resource(np, 0, &port->regs);
if (ret)
- return ERR_PTR(ret);
+ return (void __iomem *)ERR_PTR(ret);
- return devm_ioremap_resource(&pdev->dev, ®s);
+ return devm_ioremap_resource(&pdev->dev, &port->regs);
}
#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
@@ -1137,25 +966,15 @@
}
/*
- * We can't use devm_of_pci_get_host_bridge_resources() because we
- * need to parse our special DT properties encoding the MEM and IO
- * apertures.
+ * devm_of_pci_get_host_bridge_resources() only sets up translateable resources,
+ * so we need extra resource setup parsing our special DT properties encoding
+ * the MEM and IO apertures.
*/
static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
{
struct device *dev = &pcie->pdev->dev;
- struct device_node *np = dev->of_node;
+ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
int ret;
-
- INIT_LIST_HEAD(&pcie->resources);
-
- /* Get the bus range */
- ret = of_pci_parse_bus_range(np, &pcie->busn);
- if (ret) {
- dev_err(dev, "failed to parse bus-range property: %d\n", ret);
- return ret;
- }
- pci_add_resource(&pcie->resources, &pcie->busn);
/* Get the PCIe memory aperture */
mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
@@ -1165,7 +984,10 @@
}
pcie->mem.name = "PCI MEM";
- pci_add_resource(&pcie->resources, &pcie->mem);
+ pci_add_resource(&bridge->windows, &pcie->mem);
+ ret = devm_request_resource(dev, &iomem_resource, &pcie->mem);
+ if (ret)
+ return ret;
/* Get the PCIe IO aperture */
mvebu_mbus_get_pcie_io_aperture(&pcie->io);
@@ -1178,10 +1000,13 @@
resource_size(&pcie->io) - 1);
pcie->realio.name = "PCI I/O";
- pci_add_resource(&pcie->resources, &pcie->realio);
+ pci_add_resource(&bridge->windows, &pcie->realio);
+ ret = devm_request_resource(dev, &ioport_resource, &pcie->realio);
+ if (ret)
+ return ret;
}
- return devm_request_pci_bus_resources(dev, &pcie->resources);
+ return 0;
}
/*
@@ -1297,20 +1122,14 @@
mvebu_pcie_setup_hw(port);
mvebu_pcie_set_local_dev_nr(port, 1);
- mvebu_sw_pci_bridge_init(port);
+ mvebu_pci_bridge_emul_init(port);
}
pcie->nports = i;
- list_splice_init(&pcie->resources, &bridge->windows);
- bridge->dev.parent = dev;
bridge->sysdata = pcie;
- bridge->busnr = 0;
bridge->ops = &mvebu_pcie_ops;
- bridge->map_irq = of_irq_parse_and_map_pci;
- bridge->swizzle_irq = pci_common_swizzle;
bridge->align_resource = mvebu_pcie_align_resource;
- bridge->msi = pcie->msi;
return mvebu_pci_host_probe(bridge);
}
--
Gitblit v1.6.2