From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 144 +++++++++++++++++++++++++++++++++++++++++++----
1 files changed, 131 insertions(+), 13 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 6478bca..9e198ca 100644
--- a/kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/kernel/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP
*
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ * (C) Copyright 2014 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
@@ -11,6 +11,9 @@
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
+
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
+#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
/ {
compatible = "xlnx,zynqmp";
@@ -22,7 +25,7 @@
#size-cells = <0>;
cpu0: cpu@0 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
operating-points-v2 = <&cpu_opp_table>;
@@ -31,7 +34,7 @@
};
cpu1: cpu@1 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x1>;
@@ -40,7 +43,7 @@
};
cpu2: cpu@2 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x2>;
@@ -49,7 +52,7 @@
};
cpu3: cpu@3 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x3>;
@@ -115,6 +118,53 @@
method = "smc";
};
+ firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ #power-domain-cells = <1>;
+ method = "smc";
+
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupt-parent = <&gic>;
+ interrupts = <0 35 4>;
+ };
+
+ zynqmp_clk: clock-controller {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>,
+ <&video_clk>,
+ <&pss_alt_ref_clk>,
+ <&aux_ref_clk>,
+ <>_crx_ref_clk>;
+ clock-names = "pss_ref_clk",
+ "video_clk",
+ "pss_alt_ref_clk",
+ "aux_ref_clk",
+ "gt_crx_ref_clk";
+ };
+
+ nvmem_firmware {
+ compatible = "xlnx,zynqmp-nvmem-fw";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ soc_revision: soc_revision@0 {
+ reg = <0x0 0x4>;
+ };
+ };
+
+ zynqmp_pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
+
+ xlnx_aes: zynqmp-aes {
+ compatible = "xlnx,zynqmp-aes";
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -124,14 +174,22 @@
<1 10 0xf08>;
};
- amba_apu: amba-apu@0 {
+ fpga_full: fpga-full {
+ compatible = "fpga-region";
+ fpga-mgr = <&zynqmp_pcap>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ amba_apu: axi@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0 0 0xffffffff>;
gic: interrupt-controller@f9010000 {
- compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
#interrupt-cells = <3>;
reg = <0x0 0xf9010000 0x10000>,
<0x0 0xf9020000 0x20000>,
@@ -143,7 +201,7 @@
};
};
- amba: amba {
+ amba: axi {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
@@ -158,6 +216,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&zynqmp_firmware PD_CAN_0>;
};
can1: can@ff070000 {
@@ -169,6 +228,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&zynqmp_firmware PD_CAN_1>;
};
cci: cci@fd6e0000 {
@@ -199,6 +259,7 @@
interrupts = <0 124 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan2: dma@fd510000 {
@@ -209,6 +270,7 @@
interrupts = <0 125 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan3: dma@fd520000 {
@@ -219,6 +281,7 @@
interrupts = <0 126 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan4: dma@fd530000 {
@@ -229,6 +292,7 @@
interrupts = <0 127 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan5: dma@fd540000 {
@@ -239,6 +303,7 @@
interrupts = <0 128 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan6: dma@fd550000 {
@@ -249,6 +314,7 @@
interrupts = <0 129 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan7: dma@fd560000 {
@@ -259,6 +325,7 @@
interrupts = <0 130 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan8: dma@fd570000 {
@@ -269,6 +336,7 @@
interrupts = <0 131 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
/* LPDDMA default allows only secured access. inorder to enable
@@ -283,6 +351,7 @@
interrupts = <0 77 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan2: dma@ffa90000 {
@@ -293,6 +362,7 @@
interrupts = <0 78 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan3: dma@ffaa0000 {
@@ -303,6 +373,7 @@
interrupts = <0 79 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan4: dma@ffab0000 {
@@ -313,6 +384,7 @@
interrupts = <0 80 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan5: dma@ffac0000 {
@@ -323,6 +395,7 @@
interrupts = <0 81 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan6: dma@ffad0000 {
@@ -333,6 +406,7 @@
interrupts = <0 82 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan7: dma@ffae0000 {
@@ -343,6 +417,7 @@
interrupts = <0 83 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan8: dma@ffaf0000 {
@@ -353,6 +428,14 @@
interrupts = <0 84 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
+ };
+
+ mc: memory-controller@fd070000 {
+ compatible = "xlnx,zynqmp-ddrc-2.40a";
+ reg = <0x0 0xfd070000 0x0 0x30000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 112 4>;
};
gem0: ethernet@ff0b0000 {
@@ -364,6 +447,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_0>;
};
gem1: ethernet@ff0c0000 {
@@ -375,6 +459,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_1>;
};
gem2: ethernet@ff0d0000 {
@@ -386,6 +471,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_2>;
};
gem3: ethernet@ff0e0000 {
@@ -397,17 +483,20 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_3>;
};
gpio: gpio@ff0a0000 {
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
+ gpio-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
+ power-domains = <&zynqmp_firmware PD_GPIO>;
};
i2c0: i2c@ff020000 {
@@ -418,6 +507,7 @@
reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_I2C_0>;
};
i2c1: i2c@ff030000 {
@@ -428,6 +518,7 @@
reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_I2C_1>;
};
pcie: pcie@fd0e0000 {
@@ -459,11 +550,21 @@
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+ power-domains = <&zynqmp_firmware PD_PCIE>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
+ };
+
+ psgtr: phy@fd400000 {
+ compatible = "xlnx,zynqmp-psgtr-v1.1";
+ status = "disabled";
+ reg = <0x0 0xfd400000 0x0 0x40000>,
+ <0x0 0xfd3d0000 0x0 0x1000>;
+ reg-names = "serdes", "siou";
+ #phy-cells = <4>;
};
rtc: rtc@ffa60000 {
@@ -482,27 +583,34 @@
reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
+ power-domains = <&zynqmp_firmware PD_SATA>;
};
- sdhci0: sdhci@ff160000 {
- compatible = "arasan,sdhci-8.9a";
+ sdhci0: mmc@ff160000 {
+ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ #clock-cells = <1>;
+ clock-output-names = "clk_out_sd0", "clk_in_sd0";
+ power-domains = <&zynqmp_firmware PD_SD_0>;
};
- sdhci1: sdhci@ff170000 {
- compatible = "arasan,sdhci-8.9a";
+ sdhci1: mmc@ff170000 {
+ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ #clock-cells = <1>;
+ clock-output-names = "clk_out_sd1", "clk_in_sd1";
+ power-domains = <&zynqmp_firmware PD_SD_1>;
};
- smmu: smmu@fd800000 {
+ smmu: iommu@fd800000 {
compatible = "arm,mmu-500";
reg = <0x0 0xfd800000 0x0 0x20000>;
status = "disabled";
@@ -524,6 +632,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_SPI_0>;
};
spi1: spi@ff050000 {
@@ -535,6 +644,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_SPI_1>;
};
ttc0: timer@ff110000 {
@@ -544,6 +654,7 @@
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_0>;
};
ttc1: timer@ff120000 {
@@ -553,6 +664,7 @@
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_1>;
};
ttc2: timer@ff130000 {
@@ -562,6 +674,7 @@
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_2>;
};
ttc3: timer@ff140000 {
@@ -571,6 +684,7 @@
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_3>;
};
uart0: serial@ff000000 {
@@ -580,6 +694,7 @@
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&zynqmp_firmware PD_UART_0>;
};
uart1: serial@ff010000 {
@@ -589,6 +704,7 @@
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&zynqmp_firmware PD_UART_1>;
};
usb0: usb@fe200000 {
@@ -598,6 +714,7 @@
interrupts = <0 65 4>;
reg = <0x0 0xfe200000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
+ power-domains = <&zynqmp_firmware PD_USB_0>;
};
usb1: usb@fe300000 {
@@ -607,6 +724,7 @@
interrupts = <0 70 4>;
reg = <0x0 0xfe300000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
+ power-domains = <&zynqmp_firmware PD_USB_1>;
};
watchdog0: watchdog@fd4d0000 {
--
Gitblit v1.6.2