From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 145 ++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 128 insertions(+), 17 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/kernel/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index dda70a0..e0bc031 100644
--- a/kernel/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -21,11 +21,18 @@
#clock-cells = <0>;
};
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ #clock-cells = <0>;
+ };
+
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -34,10 +41,9 @@
vcc_host_5v: vcc-host-5v-regulator {
compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&usb30_host_drv>;
+ pinctrl-0 = <&usb20_host_drv>;
regulator-name = "vcc_host_5v";
regulator-always-on;
regulator-boot-on;
@@ -64,11 +70,54 @@
regulator-max-microvolt = <5000000>;
};
- xin32k: xin32k {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- #clock-cells = <0>;
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_led: led-0 {
+ gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "mmc0";
+ };
+
+ standby_led: led-1 {
+ gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "rockchip,rk3328";
+ dais = <&i2s1_p0
+ &spdif_p0>;
+ };
+
+ spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port {
+ dit_p0_0: endpoint {
+ remote-endpoint = <&spdif_p0_0>;
+ };
+ };
+ };
+};
+
+&codec {
+ mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ port@0 {
+ codec_p0_0: endpoint {
+ remote-endpoint = <&i2s1_p0_0>;
+ };
};
};
@@ -117,6 +166,14 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
@@ -127,6 +184,8 @@
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "rk805-clkout1", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
@@ -188,7 +247,7 @@
};
vcc_18: LDO_REG1 {
- regulator-name = "vdd_18";
+ regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
@@ -200,7 +259,7 @@
};
vcc18_emmc: LDO_REG2 {
- regulator-name = "vcc_18emmc";
+ regulator-name = "vcc18_emmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
@@ -226,6 +285,18 @@
};
};
+&i2s1 {
+ status = "okay";
+
+ i2s1_p0: port {
+ i2s1_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&codec_p0_0>;
+ };
+ };
+};
+
&io_domains {
status = "okay";
@@ -239,6 +310,12 @@
};
&pinctrl {
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -248,12 +325,6 @@
usb2 {
usb20_host_drv: usb20-host-drv {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb3 {
- usb30_host_drv: usb30-host-drv {
- rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
@@ -270,9 +341,36 @@
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdifm0_tx>;
+ status = "okay";
+
+ spdif_p0: port {
+ spdif_p0_0: endpoint {
+ remote-endpoint = <&dit_p0_0>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /* maximum speed for Rockchip SPI */
+ spi-max-frequency = <50000000>;
+ };
+};
+
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
status = "okay";
};
@@ -293,6 +391,11 @@
status = "okay";
};
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_host0_ehci {
status = "okay";
};
@@ -300,3 +403,11 @@
&usb_host0_ohci {
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
--
Gitblit v1.6.2