From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi | 340 ++++++++++++++++++++++++++++++++++++++++++++++----------
1 files changed, 276 insertions(+), 64 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
index 9424547..ad8ce8e 100755
--- a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/display/media-bus-format.h>
#include "rk3568.dtsi"
#include "rk3568-evb.dtsi"
@@ -18,6 +19,7 @@
rk_headset: rk-headset {
compatible = "rockchip_headset";
headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+ spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
pinctrl-names = "default";
pinctrl-0 = <&hp_det>;
};
@@ -58,7 +60,9 @@
regulator-name = "vcc3v3_pcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
enable-active-high;
+ regulator-boot-on;
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
startup-delay-us = <5000>;
vin-supply = <&dc_12v>;
@@ -85,16 +89,110 @@
regulator-boot-on;
};
#endif
-
+ ndj_io_init {
+ compatible = "nk_io_control";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nk_io_gpio>;
+
+ //gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+
+ vcc_5v {
+ gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
+ gpio_function = <0>;
+ };
+
+ vcc_12v {
+ gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
+ gpio_function = <0>;
+ };
+
+ hub_host2_rst {
+ gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
+ gpio_function = <3>;
+ };
+
+ hub_host3 {
+ gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
+ gpio_function = <0>;
+ };
+
+ wake_4g {
+ gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
+ gpio_function = <0>;
+ };
+
+ air_mode_4g {
+ gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
+ gpio_function = <0>;
+ };
+
+ reset_4g {
+ gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
+ gpio_function = <3>;
+ };
+
+ en_4g {
+ gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
+ gpio_function = <0>;
+ };
+
+ hp_en {
+ gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
+ gpio_function = <0>;
+ };
+
+ wifi_power_en {
+ gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
+ gpio_function = <0>;
+ };
+ #if 0
+ do1 {
+ gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+ gpio_function = <0>;
+ };
+
+ do2 {
+ gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ gpio_function = <0>;
+ };
+
+ do3 {
+ gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ gpio_function = <0>;
+ };
+
+ do4 {
+ gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+ gpio_function = <0>;
+ };
+
+ do5 {
+ gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
+ gpio_function = <0>;
+ };
+
+ do6 {
+ gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
+ gpio_function = <0>;
+ };
+
+ do7 {
+ gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
+ gpio_function = <0>;
+ };
+
+ di1 {
+ gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
+ gpio_function = <1>;
+ };
+ #endif
+ };
+#if 0
nk_io_init {
compatible = "nk_io_control";
-// usb_en_oc_gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; //USB_EN_OC_GPIO0_A5
- lcd_bk_en_gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
- lcd_pwblk_gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
- vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
+// vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
-// hub_host3_5V_rest_gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
@@ -102,23 +200,55 @@
air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
- spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3
-
- edp_enable_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
- edp_gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2
- edp_gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3
- edp_gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4
- edp_gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
- edp_reset = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
-// tp_reset = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
-// vddio_mipi = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
-
+// spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3
wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
-
+// pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4
pinctrl-names = "default";
- pinctrl-0 = <&nk_io_gpio>;
- nodka_lvds = <9>;
+ pinctrl-0 = <&nk_io_gpio>;
};
+#endif
+ panel: panel {
+ compatible = "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <&vcc3v3_lcd0_n>;
+ enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
+ edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
+ edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
+ bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
+ bpc = <8>;
+ prepare-delay-ms = <200>;
+ enable-delay-ms = <20>;
+ lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2
+ lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3
+ lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4
+ lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
+ nodka-lvds = <15>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <72500000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <70>;
+ hsync-len = <2>;
+ hback-porch = <88>;
+ vfront-porch = <7>;
+ vsync-len = <4>;
+ vback-porch = <17>;
+ hsync-active = <21>;
+ vsync-active = <0>;
+ de-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+ ports {
+ panel_in: endpoint {
+ remote-endpoint = <&edp_out>;
+ };
+ };
+ };
};
&combphy0_us {
@@ -134,11 +264,11 @@
};
&csi2_dphy_hw {
- status = "okay";
+ status = "disabled";
};
&csi2_dphy0 {
- status = "okay";
+ status = "disabled";
ports {
#address-cells = <1>;
@@ -181,8 +311,12 @@
* video_phy0 needs to be enabled
* when dsi0 is enabled
*/
+&video_phy0 {
+ status = "disabled";
+};
+
&dsi0 {
- status = "okay";
+ status = "disabled";
};
&dsi0_in_vp0 {
@@ -190,7 +324,7 @@
};
&dsi0_in_vp1 {
- status = "okay";
+ status = "disabled";
};
&dsi0_panel {
@@ -201,6 +335,10 @@
* video_phy1 needs to be enabled
* when dsi1 is enabled
*/
+
+&video_phy1 {
+ status = "okay";
+};
&dsi1 {
status = "disabled";
};
@@ -210,16 +348,40 @@
};
&dsi1_in_vp1 {
- status = "disabled";
+ status = "okay";
};
&dsi1_panel {
- power-supply = <&vcc3v3_lcd1_n>;
+ power-supply = <&vcc3v3_lcd1_n>; //MIPI_3V3EN_GPIO3_A3_d_3V3
+ vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
+ reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
+ vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd1_rst_gpio>;
};
+&route_dsi1 {
+ status = "disabled";
+ connect = <&vp1_out_dsi1>;
+};
+
+
+/*
+* edp_start
+*/
+
&edp {
- hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ force-hpd;
+ status = "okay";
+ ports {
+ port@1 {
+ reg = <1>;
+ edp_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+
+ };
};
&edp_phy {
@@ -227,18 +389,67 @@
};
&edp_in_vp0 {
- status = "okay";
+ status = "disabled";
};
&edp_in_vp1 {
+ status = "okay";
+
+};
+
+&route_edp {
+ status = "okay";
+ connect = <&vp1_out_edp>;
+};
+
+&route_edp {
+ status = "okay";
+};
+/*
+* edp_end
+*/
+
+/*
+* Hdmi_start
+*/
+
+&hdmi {
+ status = "okay";
+ rockchip,phy-table =
+ <92812500 0x8009 0x0000 0x0270>,
+ <165000000 0x800b 0x0000 0x026d>,
+ <185625000 0x800b 0x0000 0x01ed>,
+ <297000000 0x800b 0x0000 0x01ad>,
+ <594000000 0x8029 0x0000 0x0088>,
+ <000000000 0x0000 0x0000 0x0000>;
+};
+
+&route_hdmi {
+ status = "okay";
+ connect = <&vp0_out_hdmi>;
+};
+
+&hdmi_in_vp0 {
+ status = "okay";
+};
+
+&hdmi_in_vp1 {
status = "disabled";
};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+/*
+ * Hdmi_END
+*/
&gmac0 {
phy-mode = "rgmii";
clock_in_out = "output";
- snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
@@ -258,7 +469,9 @@
rx_delay = <0x2f>;
phy-handle = <&rgmii_phy0>;
+
status = "disabled";
+
};
&gmac1 {
@@ -292,9 +505,7 @@
* power-supply should switche to vcc3v3_lcd1_n
* when mipi panel is connected to dsi1.
*/
->1x {
- power-supply = <&vcc3v3_lcd0_n>;
-};
+
&i2c3 {
status = "okay";
@@ -313,7 +524,7 @@
};
&i2c4 {
- status = "okay";
+ status = "disabled";
gc8034: gc8034@37 {
compatible = "galaxycore,gc8034";
status = "okay";
@@ -325,7 +536,6 @@
reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
rockchip,grf = <&grf>;
- power-domains = <&power RK3568_PD_VI>;
rockchip,camera-module-index = <0>;
rockchip,camera-module-facing = "back";
rockchip,camera-module-name = "RK-CMK-8M-2-v1";
@@ -359,7 +569,7 @@
};
};
ov5695: ov5695@36 {
- status = "okay";
+ status = "disabled";
compatible = "ovti,ov5695";
reg = <0x36>;
clocks = <&cru CLK_CIF_OUT>;
@@ -409,20 +619,14 @@
};
};
-&video_phy0 {
- status = "okay";
-};
-&video_phy1 {
- status = "disabled";
-};
&pcie30phy {
status = "okay";
};
-&pcie3x2 {
- reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+&pcie2x1 {
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
@@ -437,7 +641,8 @@
// };
headphone {
hp_det: hp-det {
- rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
+ <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
@@ -452,6 +657,13 @@
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ lcd1 {
+ lcd1_rst_gpio: lcd1-rst-gpio {
+ rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
nk_io_init{
nk_io_gpio: nk-io-gpio{
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
@@ -465,27 +677,30 @@
<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
- <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
+ <2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
+ <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
+ <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
+ <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&rkisp {
- status = "okay";
+ status = "disabled";
};
&rkisp_mmu {
- status = "okay";
+ status = "disabled";
};
&rkisp_vir0 {
- status = "okay";
+ status = "disabled";
port {
#address-cells = <1>;
@@ -498,15 +713,7 @@
};
};
-&route_dsi0 {
- status = "okay";
- connect = <&vp1_out_dsi0>;
-};
-&route_edp {
- status = "okay";
- connect = <&vp0_out_edp>;
-};
&sata2 {
status = "okay";
@@ -545,12 +752,12 @@
};
&vcc3v3_lcd0_n {
- gpio = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
&vcc3v3_lcd1_n {
- gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
enable-active-high;
};
@@ -566,20 +773,25 @@
clock-names = "ext_clock";
//wifi-bt-power-toggle;
uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
- BT,power_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default", "rts_gpio";
pinctrl-0 = <&uart1m0_rtsn>;
pinctrl-1 = <&uart1_gpios>;
- BT,reset_gpio = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
- BT,wake_gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
- BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
- status = "disabled";
+ BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ BT,wake_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
};
&uart0 {
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+ status = "okay";
+};
+
&uart3 {
status = "okay";
pinctrl-0 = <&uart3m1_xfer>;
--
Gitblit v1.6.2