From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 217 +++++++++++++++++++++++++++++------------------------
1 files changed, 118 insertions(+), 99 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/kernel/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 43cae47..bd78378 100644
--- a/kernel/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/kernel/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1330,7 +1330,6 @@
battery: bq27742@55 {
compatible = "ti,bq27742";
reg = <0x55>;
- battery-name = "battery";
};
};
};
@@ -1340,10 +1339,29 @@
status = "okay";
clock-frequency = <1000000>;
- max77620: max77620@3c {
+ max77621_cpu: max77621@1b {
+ compatible = "maxim,max77621";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(Y, 1) IRQ_TYPE_LEVEL_LOW>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1231250>;
+ regulator-name = "PPVAR_CPU";
+ regulator-ramp-delay = <12500>;
+ maxim,dvs-default-state = <1>;
+ maxim,enable-active-discharge;
+ maxim,enable-bias-control;
+ maxim,enable-etr;
+ maxim,enable-gpio = <&pmic 5 0>;
+ maxim,externally-enable;
+ };
+
+ pmic: pmic@3c {
compatible = "maxim,max77620";
reg = <0x3c>;
- interrupts = <0 86 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
@@ -1354,8 +1372,8 @@
pinctrl-names = "default";
pinctrl-0 = <&max77620_default>;
- max77620_default: pinmux@0 {
- pin_gpio {
+ max77620_default: pinmux {
+ gpio0_1_2_7 {
pins = "gpio0", "gpio1", "gpio2", "gpio7";
function = "gpio";
};
@@ -1365,7 +1383,7 @@
* sequence, So it must be sequenced up (automatically
* set by OTP) and down properly.
*/
- pin_gpio3 {
+ gpio3 {
pins = "gpio3";
function = "fps-out";
drive-open-drain = <1>;
@@ -1374,13 +1392,13 @@
maxim,active-fps-power-down-slot = <2>;
};
- pin_gpio5_6 {
+ gpio5_6 {
pins = "gpio5", "gpio6";
function = "gpio";
drive-push-pull = <1>;
};
- pin_32k {
+ gpio4 {
pins = "gpio4";
function = "32k-out1";
};
@@ -1573,7 +1591,7 @@
reg = <0x1a>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
- clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
clock-names = "mclk";
nuvoton,jkdet-enable;
@@ -1635,6 +1653,11 @@
padctl@7009f000 {
status = "okay";
+ avdd-pll-utmip-supply = <&pp1800>;
+ avdd-pll-uerefe-supply = <&pp1050_avdd>;
+ dvdd-pex-pll-supply = <&avddio_1v05>;
+ hvdd-pex-pll-e-supply = <&pp1800>;
+
pads {
usb2 {
status = "okay";
@@ -1673,10 +1696,22 @@
};
};
- sdhci@700b0600 {
+ mmc@700b0600 {
bus-width = <8>;
non-removable;
status = "okay";
+ };
+
+ clock@70110000 {
+ status = "okay";
+ nvidia,cf = <6>;
+ nvidia,ci = <0>;
+ nvidia,cg = <2>;
+ nvidia,droop-ctrl = <0x00000f00>;
+ nvidia,force-mode = <1>;
+ nvidia,i2c-fs-rate = <400000>;
+ nvidia,sample-rate = <12500>;
+ vdd-cpu-supply = <&max77621_cpu>;
};
aconnect@702c0000 {
@@ -1686,22 +1721,15 @@
status = "okay";
};
- agic@702f9000 {
+ interrupt-controller@702f9000 {
status = "okay";
};
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
};
cpus {
@@ -1720,11 +1748,17 @@
cpu@3 {
enable-method = "psci";
};
+
+ idle-states {
+ cpu-sleep {
+ arm,psci-suspend-param = <0x00010007>;
+ status = "okay";
+ };
+ };
};
gpio-keys {
compatible = "gpio-keys";
- gpio-keys,name = "gpio-keys";
power {
label = "Power";
@@ -1773,88 +1807,73 @@
method = "smc";
};
- regulators {
- compatible = "simple-bus";
- device_type = "fixed-regulators";
- #address-cells = <1>;
- #size-cells = <0>;
+ ppvar_sys: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "PPVAR_SYS";
+ regulator-min-microvolt = <4400000>;
+ regulator-max-microvolt = <4400000>;
+ regulator-always-on;
+ };
- ppvar_sys: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "PPVAR_SYS";
- regulator-min-microvolt = <4400000>;
- regulator-max-microvolt = <4400000>;
- regulator-always-on;
- };
+ pplcd_vdd: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "PPLCD_VDD";
+ regulator-min-microvolt = <4400000>;
+ regulator-max-microvolt = <4400000>;
+ gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
- pplcd_vdd: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "PPLCD_VDD";
- regulator-min-microvolt = <4400000>;
- regulator-max-microvolt = <4400000>;
- gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
- enable-active-high;
- regulator-boot-on;
- };
+ pp3000_always: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "PP3000_ALWAYS";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
- pp3000_always: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "PP3000_ALWAYS";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
+ pp3300: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "PP3300";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ };
- pp3300: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "PP3300";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- enable-active-high;
- };
+ pp5000: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "PP5000";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- pp5000: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "PP5000";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ pp1800_lcdio: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "PP1800_LCDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
- pp1800_lcdio: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "PP1800_LCDIO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
- enable-active-high;
- regulator-boot-on;
- };
+ pp1800_cam: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "PP1800_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
+ enable-active-high;
+ };
- pp1800_cam: regulator@6 {
- compatible = "regulator-fixed";
- reg= <6>;
- regulator-name = "PP1800_CAM";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
- enable-active-high;
- };
-
- usbc_vbus: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "USBC_VBUS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
+ usbc_vbus: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "USBC_VBUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
};
};
--
Gitblit v1.6.2