From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 401 +++++++++++++++++++++++++++++++++------------------------
1 files changed, 231 insertions(+), 170 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/kernel/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index a0385a3..6e5f846 100644
--- a/kernel/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/kernel/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -18,7 +18,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
@@ -38,6 +38,9 @@
sor@54540000 {
status = "okay";
+
+ avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
+ vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
nvidia,dpaux = <&dpaux>;
nvidia,panel = <&panel>;
@@ -671,7 +674,7 @@
regulator-boot-on;
};
- ldo0 {
+ avdd_1v05_run: ldo0 {
regulator-name = "+1.05_RUN_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
@@ -781,7 +784,6 @@
battery: smart-battery {
compatible = "sbs,sbs-battery";
reg = <0xb>;
- battery-name = "battery";
sbs,i2c-retry-count = <2>;
sbs,poll-retry-count = <10>;
/* power-supplies = <&charger>; */
@@ -893,13 +895,108 @@
nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
};
+ usb@70090000 {
+ phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+ avddio-pex-supply = <&vdd_1v05_run>;
+ dvddio-pex-supply = <&vdd_1v05_run>;
+ avdd-usb-supply = <&vdd_3v3_lp0>;
+ hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+
+ status = "okay";
+ };
+
+ padctl@7009f000 {
+ avdd-pll-utmip-supply = <&vddio_1v8>;
+ avdd-pll-erefe-supply = <&avdd_1v05_run>;
+ avdd-pex-pll-supply = <&vdd_1v05_run>;
+ hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+ pads {
+ usb2 {
+ status = "okay";
+
+ lanes {
+ usb2-0 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-1 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-2 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+ };
+ };
+
+ pcie {
+ status = "okay";
+
+ lanes {
+ pcie-0 {
+ nvidia,function = "usb3-ss";
+ status = "okay";
+ };
+
+ pcie-1 {
+ nvidia,function = "usb3-ss";
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ status = "okay";
+ mode = "otg";
+
+ vbus-supply = <&vdd_usb1_vbus>;
+ };
+
+ usb2-1 {
+ status = "okay";
+ mode = "host";
+
+ vbus-supply = <&vdd_run_cam>;
+ };
+
+ usb2-2 {
+ status = "okay";
+ mode = "host";
+
+ vbus-supply = <&vdd_usb3_vbus>;
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <0>;
+ status = "okay";
+ };
+
+ usb3-1 {
+ nvidia,usb2-companion = <2>;
+ status = "okay";
+ };
+ };
+ };
+
/* WIFI/BT module */
- sdhci@700b0000 {
+ mmc@700b0000 {
status = "disabled";
};
/* external SD/MMC */
- sdhci@700b0400 {
+ mmc@700b0400 {
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
@@ -909,37 +1006,10 @@
};
/* EMMC 4.51 */
- sdhci@700b0600 {
+ mmc@700b0600 {
status = "okay";
bus-width = <8>;
non-removable;
- };
-
- usb@7d000000 {
- status = "okay";
- };
-
- usb-phy@7d000000 {
- status = "okay";
- vbus-supply = <&vdd_usb1_vbus>;
- };
-
- usb@7d004000 {
- status = "okay";
- };
-
- usb-phy@7d004000 {
- status = "okay";
- vbus-supply = <&vdd_run_cam>;
- };
-
- usb@7d008000 {
- status = "okay";
- };
-
- usb-phy@7d008000 {
- status = "okay";
- vbus-supply = <&vdd_usb3_vbus>;
};
backlight: backlight {
@@ -955,17 +1025,10 @@
backlight-boot-off;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg=<0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
};
gpio-keys {
@@ -990,147 +1053,145 @@
};
panel: panel {
- compatible = "innolux,n116bge", "simple-panel";
+ compatible = "innolux,n116bge";
+ power-supply = <&vdd_3v3_panel>;
backlight = <&backlight>;
ddc-i2c-bus = <&dpaux>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ vdd_mux: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "+VDD_MUX";
+ regulator-min-microvolt = <19000000>;
+ regulator-max-microvolt = <19000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- vdd_mux: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "+VDD_MUX";
- regulator-min-microvolt = <19000000>;
- regulator-max-microvolt = <19000000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ vdd_5v0_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_5v0_sys: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "+5V_SYS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
+ vdd_3v3_sys: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_3v3_sys: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "+3.3V_SYS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
+ vdd_3v3_run: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_RUN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
- vdd_3v3_run: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "+3.3V_RUN";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
+ vdd_3v3_hdmi: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_run>;
+ };
- vdd_3v3_hdmi: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_3v3_run>;
- };
+ vdd_led: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "+VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_led: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "+VDD_LED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_mux>;
- };
+ vdd_usb1_vbus: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_USB_HS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_usb1_vbus: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "+5V_USB_HS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_usb3_vbus: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_USB_SS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_usb3_vbus: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "+5V_USB_SS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_3v3_panel: regulator@8 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_PANEL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
- vdd_3v3_panel: regulator@8 {
- compatible = "regulator-fixed";
- reg = <8>;
- regulator-name = "+3.3V_PANEL";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
+ vdd_hdmi_pll: regulator@9 {
+ compatible = "regulator-fixed";
+ regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_1v05_run>;
+ };
- vdd_hdmi_pll: regulator@9 {
- compatible = "regulator-fixed";
- reg = <9>;
- regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05_run>;
- };
+ vdd_5v0_hdmi: regulator@10 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_5v0_hdmi: regulator@10 {
- compatible = "regulator-fixed";
- reg = <10>;
- regulator-name = "+5V_HDMI_CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_5v0_ts: regulator@11 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_VDD_TS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vdd_5v0_ts: regulator@11 {
- compatible = "regulator-fixed";
- reg = <11>;
- regulator-name = "+5V_VDD_TS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vdd_3v3_lp0: regulator@12 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_LP0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*
+ * TODO: find a way to wire this up with the USB EHCI
+ * controllers so that it can be enabled on demand.
+ */
+ regulator-always-on;
+ gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
};
};
--
Gitblit v1.6.2