From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 104 +++++++++++++++++++++++++++++++++++++++++++---------
1 files changed, 86 insertions(+), 18 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/kernel/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 6d4dee3..edbcf3c 100644
--- a/kernel/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/kernel/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -56,7 +56,7 @@
};
cpu0: cpu@0 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x0 0x0>;
enable-method = "psci";
@@ -70,7 +70,7 @@
};
cpu1: cpu@1 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x0 0x1>;
enable-method = "psci";
@@ -79,10 +79,11 @@
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x0 0x2>;
enable-method = "psci";
@@ -91,10 +92,11 @@
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x0 0x3>;
enable-method = "psci";
@@ -103,10 +105,11 @@
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};
cpu4: cpu@100 {
- compatible = "arm,cortex-a73", "arm,armv8";
+ compatible = "arm,cortex-a73";
device_type = "cpu";
reg = <0x0 0x100>;
enable-method = "psci";
@@ -120,7 +123,7 @@
};
cpu5: cpu@101 {
- compatible = "arm,cortex-a73", "arm,armv8";
+ compatible = "arm,cortex-a73";
device_type = "cpu";
reg = <0x0 0x101>;
enable-method = "psci";
@@ -129,10 +132,11 @@
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};
cpu6: cpu@102 {
- compatible = "arm,cortex-a73", "arm,armv8";
+ compatible = "arm,cortex-a73";
device_type = "cpu";
reg = <0x0 0x102>;
enable-method = "psci";
@@ -141,10 +145,11 @@
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};
cpu7: cpu@103 {
- compatible = "arm,cortex-a73", "arm,armv8";
+ compatible = "arm,cortex-a73";
device_type = "cpu";
reg = <0x0 0x103>;
enable-method = "psci";
@@ -153,6 +158,7 @@
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};
idle-states {
@@ -425,7 +431,7 @@
resets = <&iomcu_rst 0x20 4>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
- status = "disabled";
+ status = "ok";
};
i2c3: i2c@fdf0c000 {
@@ -472,6 +478,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf00000 0x0 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 2 &dma0 3>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
<&crg_ctrl HI3660_CLK_GATE_UART1>;
clock-names = "uartclk", "apb_pclk";
@@ -484,6 +492,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf03000 0x0 0x1000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 4 &dma0 5>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
@@ -508,6 +518,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf01000 0x0 0x1000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 6 &dma0 7>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
<&crg_ctrl HI3660_CLK_GATE_UART4>;
clock-names = "uartclk", "apb_pclk";
@@ -520,6 +532,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 8 &dma0 9>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
<&crg_ctrl HI3660_CLK_GATE_UART5>;
clock-names = "uartclk", "apb_pclk";
@@ -546,11 +560,21 @@
#dma-cells = <1>;
dma-channels = <16>;
dma-requests = <32>;
- dma-min-chan = <1>;
+ dma-channel-mask = <0xfffe>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>;
dma-no-cci;
dma-type = "hi3660_dma";
+ };
+
+ asp_dmac: dma-controller@e804b000 {
+ compatible = "hisilicon,hisi-pcm-asp-dma-1.0";
+ reg = <0x0 0xe804b000 0x0 0x1000>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "asp_dma_irq";
};
rtc0: rtc@fff04000 {
@@ -950,7 +974,7 @@
clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>;
clock-names = "apb_pclk";
pinctrl-names = "default";
- pinctrl-0 = <&spi2_pmx_func>;
+ pinctrl-0 = <&spi2_pmx_func &spi2_cfg_func>;
num-cs = <1>;
cs-gpios = <&gpio27 2 0>;
status = "disabled";
@@ -965,7 +989,7 @@
clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>;
clock-names = "apb_pclk";
pinctrl-names = "default";
- pinctrl-0 = <&spi3_pmx_func>;
+ pinctrl-0 = <&spi3_pmx_func &spi3_cfg_func>;
num-cs = <1>;
cs-gpios = <&gpio18 5 0>;
status = "disabled";
@@ -1065,16 +1089,18 @@
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xe8a06000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg_ctrl HI3660_OSC32K>;
- clock-names = "apb_pclk";
+ clocks = <&crg_ctrl HI3660_OSC32K>,
+ <&crg_ctrl HI3660_OSC32K>;
+ clock-names = "wdog_clk", "apb_pclk";
};
watchdog1: watchdog@e8a07000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xe8a07000 0x0 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg_ctrl HI3660_OSC32K>;
- clock-names = "apb_pclk";
+ clocks = <&crg_ctrl HI3660_OSC32K>,
+ <&crg_ctrl HI3660_OSC32K>;
+ clock-names = "wdog_clk", "apb_pclk";
};
tsensor: tsensor@fff30000 {
@@ -1112,15 +1138,57 @@
map0 {
trip = <&target>;
contribution = <1024>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&target>;
contribution = <512>;
- cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
+
+ usb3_otg_bc: usb3_otg_bc@ff200000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+
+ usb_phy: usb-phy {
+ compatible = "hisilicon,hi3660-usb-phy";
+ #phy-cells = <0>;
+ hisilicon,pericrg-syscon = <&crg_ctrl>;
+ hisilicon,pctrl-syscon = <&pctrl>;
+ hisilicon,eye-diagram-param = <0x22466e4>;
+ };
+ };
+
+ dwc3: dwc3@ff100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff100000 0x0 0x100000>;
+
+ clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+ <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ clock-names = "ref", "bus_early";
+
+ assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ assigned-clock-rates = <229000000>;
+
+ resets = <&crg_rst 0x90 8>,
+ <&crg_rst 0x90 7>,
+ <&crg_rst 0x90 6>,
+ <&crg_rst 0x90 5>;
+
+ interrupts = <0 159 4>, <0 161 4>;
+ phys = <&usb_phy>;
+ phy-names = "usb3-phy";
+ };
};
};
+
+#include "hi3660-coresight.dtsi"
--
Gitblit v1.6.2