From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts | 286 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 279 insertions(+), 7 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/kernel/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
index 21ca80f..59291e0 100644
--- a/kernel/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
+++ b/kernel/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
@@ -13,6 +12,9 @@
model = "Bubblegum-96";
aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ mmc2 = &mmc2;
serial5 = &uart5;
};
@@ -25,11 +27,282 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- uart5_clk: uart5-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
+ /* Fixed regulator used in the absence of PMIC */
+ vcc_3v1: vcc-3v1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.1V";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
};
+
+ /* Fixed regulator used in the absence of PMIC */
+ sd_vcc: sd-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.1V";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+};
+
+&i2c0 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_default>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "Schematics Bubblegum96"
+ * version v1.0
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Boards naming of a line and the schematic name of
+ * the same line are in conflict, the 96Boards specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. Only exception is the I2C lines for which the schematic
+ * naming has been preferred. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+&pinctrl {
+ gpio-line-names =
+ "GPIO-A", /* GPIO_0, LSEC pin 23 */
+ "GPIO-B", /* GPIO_1, LSEC pin 24 */
+ "GPIO-C", /* GPIO_2, LSEC pin 25 */
+ "GPIO-D", /* GPIO_3, LSEC pin 26 */
+ "GPIO-E", /* GPIO_4, LSEC pin 27 */
+ "GPIO-F", /* GPIO_5, LSEC pin 28 */
+ "GPIO-G", /* GPIO_6, LSEC pin 29 */
+ "GPIO-H", /* GPIO_7, LSEC pin 30 */
+ "GPIO-I", /* GPIO_8, LSEC pin 31 */
+ "GPIO-J", /* GPIO_9, LSEC pin 32 */
+ "NC", /* GPIO_10 */
+ "NC", /* GPIO_11 */
+ "SIRQ2_1V8", /* GPIO_12 */
+ "PCM0_OUT", /* GPIO_13 */
+ "WIFI_LED", /* GPIO_14 */
+ "PCM0_SYNC", /* GPIO_15 */
+ "PCM0_CLK", /* GPIO_16 */
+ "PCM0_IN", /* GPIO_17 */
+ "BT_LED", /* GPIO_18 */
+ "LED0", /* GPIO_19 */
+ "LED1", /* GPIO_20 */
+ "JTAG_TCK", /* GPIO_21 */
+ "JTAG_TMS", /* GPIO_22 */
+ "JTAG_TDI", /* GPIO_23 */
+ "JTAG_TDO", /* GPIO_24 */
+ "[UART1_RxD]", /* GPIO_25, LSEC pin 13 */
+ "NC", /* GPIO_26 */
+ "[UART1_TxD]", /* GPIO_27, LSEC pin 11 */
+ "SD0_D0", /* GPIO_28 */
+ "SD0_D1", /* GPIO_29 */
+ "SD0_D2", /* GPIO_30 */
+ "SD0_D3", /* GPIO_31 */
+ "SD1_D0", /* GPIO_32 */
+ "SD1_D1", /* GPIO_33 */
+ "SD1_D2", /* GPIO_34 */
+ "SD1_D3", /* GPIO_35 */
+ "SD0_CMD", /* GPIO_36 */
+ "SD0_CLK", /* GPIO_37 */
+ "SD1_CMD", /* GPIO_38 */
+ "SD1_CLK", /* GPIO_39 */
+ "SPI0_SCLK", /* GPIO_40, LSEC pin 8 */
+ "SPI0_CS", /* GPIO_41, LSEC pin 12 */
+ "SPI0_DIN", /* GPIO_42, LSEC pin 10 */
+ "SPI0_DOUT", /* GPIO_43, LSEC pin 14 */
+ "I2C5_SDATA", /* GPIO_44, HSEC pin 36 */
+ "I2C5_SCLK", /* GPIO_45, HSEC pin 38 */
+ "UART0_RX", /* GPIO_46, LSEC pin 7 */
+ "UART0_TX", /* GPIO_47, LSEC pin 5 */
+ "UART0_RTSB", /* GPIO_48, LSEC pin 9 */
+ "UART0_CTSB", /* GPIO_49, LSEC pin 3 */
+ "I2C4_SCLK", /* GPIO_50, HSEC pin 32 */
+ "I2C4_SDATA", /* GPIO_51, HSEC pin 34 */
+ "I2C0_SCLK", /* GPIO_52 */
+ "I2C0_SDATA", /* GPIO_53 */
+ "I2C1_SCLK", /* GPIO_54, LSEC pin 15 */
+ "I2C1_SDATA", /* GPIO_55, LSEC pin 17 */
+ "I2C2_SCLK", /* GPIO_56, LSEC pin 19 */
+ "I2C2_SDATA", /* GPIO_57, LSEC pin 21 */
+ "CSI0_DN0", /* GPIO_58, HSEC pin 10 */
+ "CSI0_DP0", /* GPIO_59, HSEC pin 8 */
+ "CSI0_DN1", /* GPIO_60, HSEC pin 16 */
+ "CSI0_DP1", /* GPIO_61, HSEC pin 14 */
+ "CSI0_CN", /* GPIO_62, HSEC pin 4 */
+ "CSI0_CP", /* GPIO_63, HSEC pin 2 */
+ "CSI0_DN2", /* GPIO_64, HSEC pin 22 */
+ "CSI0_DP2", /* GPIO_65, HSEC pin 20 */
+ "CSI0_DN3", /* GPIO_66, HSEC pin 28 */
+ "CSI0_DP3", /* GPIO_67, HSEC pin 26 */
+ "[CLK0]", /* GPIO_68, HSEC pin 15 */
+ "CSI1_DN0", /* GPIO_69, HSEC pin 44 */
+ "CSI1_DP0", /* GPIO_70, HSEC pin 42 */
+ "CSI1_DN1", /* GPIO_71, HSEC pin 50 */
+ "CSI1_DP1", /* GPIO_72, HSEC pin 48 */
+ "CSI1_CN", /* GPIO_73, HSEC pin 56 */
+ "CSI1_CP", /* GPIO_74, HSEC pin 54 */
+ "[CLK1]", /* GPIO_75, HSEC pin 17 */
+ "[GPIOD0]", /* GPIO_76 */
+ "[GPIOD1]", /* GPIO_77 */
+ "BT_RST_N", /* GPIO_78 */
+ "EXT_DC_EN", /* GPIO_79 */
+ "[PCM_DI]", /* GPIO_80, LSEC pin 22 */
+ "[PCM_DO]", /* GPIO_81, LSEC pin 20 */
+ "[PCM_CLK]", /* GPIO_82, LSEC pin 18 */
+ "[PCM_FS]", /* GPIO_83, LSEC pin 16 */
+ "WAKE_BT", /* GPIO_84 */
+ "WL_REG_ON", /* GPIO_85 */
+ "NC", /* GPIO_86 */
+ "NC", /* GPIO_87 */
+ "NC", /* GPIO_88 */
+ "NC", /* GPIO_89 */
+ "NC", /* GPIO_90 */
+ "WIFI_WAKE", /* GPIO_91 */
+ "BT_WAKE", /* GPIO_92 */
+ "NC", /* GPIO_93 */
+ "OTG_EN2", /* GPIO_94 */
+ "OTG_EN", /* GPIO_95 */
+ "DSI_DP3", /* GPIO_96, HSEC pin 45 */
+ "DSI_DN3", /* GPIO_97, HSEC pin 47 */
+ "DSI_DP1", /* GPIO_98, HSEC pin 33 */
+ "DSI_DN1", /* GPIO_99, HSEC pin 35 */
+ "DSI_CP", /* GPIO_100, HSEC pin 21 */
+ "DSI_CN", /* GPIO_101, HSEC pin 23 */
+ "DSI_DP0", /* GPIO_102, HSEC pin 27 */
+ "DSI_DN0", /* GPIO_103, HSEC pin 29 */
+ "DSI_DP2", /* GPIO_104, HSEC pin 39 */
+ "DSI_DN2", /* GPIO_105, HSEC pin 41 */
+ "N0_D0", /* GPIO_106 */
+ "N0_D1", /* GPIO_107 */
+ "N0_D2", /* GPIO_108 */
+ "N0_D3", /* GPIO_109 */
+ "N0_D4", /* GPIO_110 */
+ "N0_D5", /* GPIO_111 */
+ "N0_D6", /* GPIO_112 */
+ "N0_D7", /* GPIO_113 */
+ "N0_DQS", /* GPIO_114 */
+ "N0_DQSN", /* GPIO_115 */
+ "NC", /* GPIO_116 */
+ "NC", /* GPIO_117 */
+ "NC", /* GPIO_118 */
+ "N0_CEB1", /* GPIO_119 */
+ "CARD_DT", /* GPIO_120 */
+ "N0_CEB3", /* GPIO_121 */
+ "SD_DAT0", /* GPIO_122, HSEC pin 1 */
+ "SD_DAT1", /* GPIO_123, HSEC pin 3 */
+ "SD_DAT2", /* GPIO_124, HSEC pin 5 */
+ "SD_DAT3", /* GPIO_125, HSEC pin 7 */
+ "NC", /* GPIO_126 */
+ "NC", /* GPIO_127 */
+ "[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */
+ "[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */
+ "NC", /* GPIO_130 */
+ "SD_CMD", /* GPIO_131 */
+ "GPIO-L", /* GPIO_132, LSEC pin 34 */
+ "GPIO-K", /* GPIO_133, LSEC pin 33 */
+ "NC", /* GPIO_134 */
+ "SD_SCLK", /* GPIO_135 */
+ "NC", /* GPIO_136 */
+ "JTAG_TRST", /* GPIO_137 */
+ "I2C3_SCLK", /* GPIO_138 */
+ "LED2", /* GPIO_139 */
+ "LED3", /* GPIO_140 */
+ "I2C3_SDATA", /* GPIO_141 */
+ "UART3_RX", /* GPIO_142 */
+ "UART3_TX", /* GPIO_143 */
+ "UART3_RTSB", /* GPIO_144 */
+ "UART3_CTSB"; /* GPIO_145 */
+
+ i2c0_default: i2c0-default {
+ pinmux {
+ groups = "i2c0_mfp";
+ function = "i2c0";
+ };
+ pinconf {
+ pins = "i2c0_sclk", "i2c0_sdata";
+ bias-pull-up;
+ };
+ };
+
+ i2c1_default: i2c1-default {
+ pinconf {
+ pins = "i2c1_sclk", "i2c1_sdata";
+ bias-pull-up;
+ };
+ };
+
+ i2c2_default: i2c2-default {
+ pinconf {
+ pins = "i2c2_sclk", "i2c2_sdata";
+ bias-pull-up;
+ };
+ };
+
+ mmc0_default: mmc0_default {
+ pinmux {
+ groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+ "sd0_cmd_mfp", "sd0_clk_mfp";
+ function = "sd0";
+ };
+ };
+
+ mmc2_default: mmc2_default {
+ pinmux {
+ groups = "nand0_d0_ceb3_mfp";
+ function = "sd2";
+ };
+ };
+};
+
+/* uSD */
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_default>;
+ no-sdio;
+ no-mmc;
+ no-1-8-v;
+ cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <&sd_vcc>;
+ vqmmc-supply = <&sd_vcc>;
+};
+
+/* eMMC */
+&mmc2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_default>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ bus-width = <8>;
+ vmmc-supply = <&vcc_3v1>;
};
&timer {
@@ -38,5 +311,4 @@
&uart5 {
status = "okay";
- clocks = <&uart5_clk>;
};
--
Gitblit v1.6.2