From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/arch/arm/boot/dts/rv1106g-evb1-mcu-display-v20.dts | 302 --------------------------------------------------
1 files changed, 1 insertions(+), 301 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/rv1106g-evb1-mcu-display-v20.dts b/kernel/arch/arm/boot/dts/rv1106g-evb1-mcu-display-v20.dts
index 21dbea7..d2c2cd1 100644
--- a/kernel/arch/arm/boot/dts/rv1106g-evb1-mcu-display-v20.dts
+++ b/kernel/arch/arm/boot/dts/rv1106g-evb1-mcu-display-v20.dts
@@ -5,310 +5,10 @@
/dts-v1/;
-#include <dt-bindings/display/media-bus-format.h>
#include "rv1106g-evb1-v11.dts"
+#include "rv1106-evb-ext-mcu-v10.dtsi"
/ {
model = "Rockchip RV1106G EVB1 V11 Board + RK EVB MCU 8BIT Display V20 Ext Board";
compatible = "rockchip,rv1106g-evb1-mcu-display-v20", "rockchip,rv1106";
-
- backlight: backlight {
- status = "okay";
- compatible = "pwm-backlight";
- pwms = <&pwm3 0 25000 0>;
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <200>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- linux,cma {
- compatible = "shared-dma-pool";
- inactive;
- reusable;
- size = <0x1000000>;
- linux,cma-default;
- };
-
- drm_logo: drm-logo@00000000 {
- compatible = "rockchip,drm-logo";
- reg = <0x0 0x0>;
- };
- };
-};
-
-&display_subsystem {
- status = "okay";
- logo-memory-region = <&drm_logo>;
-};
-
-&pwm3 {
- status = "okay";
- pinctrl-names = "active";
- pinctrl-0 = <&pwm3m1_pins>;
-};
-
-&rgb {
- status = "okay";
- rockchip,data-sync-bypass;
- pinctrl-names = "default";
- /*
- * rgb3x8_pins for RGB3x8(8bit)
- * rgb565_pins for RGB565(16bit)
- */
- pinctrl-0 = <&rgb3x8_pins>;
-
- /*
- * 320x480 RGB/MCU screen K350C4516T
- */
- mcu_panel: mcu-panel {
- /*
- * MEDIA_BUS_FMT_RGB888_3X8 for RGB3x8(8bit)
- * MEDIA_BUS_FMT_RGB565_1X16 for RGB565(16bit)
- */
- bus-format = <MEDIA_BUS_FMT_RGB888_3X8>;
- backlight = <&backlight>;
- enable-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
- enable-delay-ms = <20>;
- reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
- reset-delay-ms = <10>;
- prepare-delay-ms = <20>;
- unprepare-delay-ms = <20>;
- disable-delay-ms = <20>;
- init-delay-ms = <10>;
- width-mm = <217>;
- height-mm = <136>;
-
- // type:0 is cmd, 1 is data
- panel-init-sequence = [
- //type delay num val1 val2 val3
- 00 00 01 e0
- 01 00 01 00
- 01 00 01 07
- 01 00 01 0f
- 01 00 01 0d
- 01 00 01 1b
- 01 00 01 0a
- 01 00 01 3c
-
- 01 00 01 78
- 01 00 01 4a
- 01 00 01 07
- 01 00 01 0e
- 01 00 01 09
- 01 00 01 1b
- 01 00 01 1e
- 01 00 01 0f
-
- 00 00 01 e1
- 01 00 01 00
- 01 00 01 22
- 01 00 01 24
- 01 00 01 06
- 01 00 01 12
- 01 00 01 07
- 01 00 01 36
-
- 01 00 01 47
- 01 00 01 47
- 01 00 01 06
- 01 00 01 0a
- 01 00 01 07
- 01 00 01 30
- 01 00 01 37
- 01 00 01 0f
-
- 00 00 01 c0
- 01 00 01 10
- 01 00 01 10
-
- 00 00 01 c1
- 01 00 01 41
-
- 00 00 01 c5
- 01 00 01 00
- 01 00 01 22
- 01 00 01 80
-
- 00 00 01 36
- 01 00 01 48
-
- 00 00 01 3a
- 01 00 01 66 /*
- * interface pixel format:
- * 66 for RGB3x8(8bit)
- * 55 for RGB565(16bit)
- */
-
- 00 00 01 b0
- 01 00 01 00
-
- 00 00 01 b1
- 01 00 01 70 /*
- * frame rate control:
- * 70 (45hz) for RGB3x8(8bit)
- * a0 (60hz) for RGB565(16bit)
- */
- 01 00 01 11
- 00 00 01 b4
- 01 00 01 02
- 00 00 01 B6
- 01 00 01 02 /*
- * display function control:
- * 32 for RGB
- * 02 for MCU
- */
- 01 00 01 02
-
- 00 00 01 b7
- 01 00 01 c6
-
- 00 00 01 be
- 01 00 01 00
- 01 00 01 04
-
- 00 00 01 e9
- 01 00 01 00
-
- 00 00 01 f7
- 01 00 01 a9
- 01 00 01 51
- 01 00 01 2c
- 01 00 01 82
-
- 00 78 01 11
- 00 32 01 29
- 00 00 01 2c
- ];
-
- panel-exit-sequence = [
- //type delay num val1 val2 val3
- 00 0a 01 28
- 00 78 01 10
- ];
-
- display-timings {
- native-mode = <&kd050fwfba002_timing>;
-
- kd050fwfba002_timing: timing0 {
- /*
- * 7840125 for frame rate 45Hz
- * 10453500 for frame rate 60Hz
- */
- clock-frequency = <7840125>;
- hactive = <320>;
- vactive = <480>;
- hback-porch = <10>;
- hfront-porch = <5>;
- vback-porch = <10>;
- vfront-porch = <5>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <0>;
- pixelclk-active = <1>;
- };
- };
-
- port {
- panel_in_rgb: endpoint {
- remote-endpoint = <&rgb_out_panel>;
- };
- };
- };
-
- ports {
- rgb_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- rgb_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_rgb>;
- };
- };
- };
-};
-
-&rgb_in_vop {
- status = "okay";
-};
-
-&route_rgb {
- status = "disabled";
-};
-
-/*
- * The pins of sdmmc1 and lcd are multiplexed
- */
-&sdio {
- status = "disabled";
-};
-
-&sdio_pwrseq {
- status = "disabled";
-};
-
-&vop {
- status = "okay";
-
- /*
- * Default config is as follows:
- *
- * mcu-pix-total = <9>;
- * mcu-cs-pst = <1>;
- * mcu-cs-pend = <8>;
- * mcu-rw-pst = <2>;
- * mcu-rw-pend = <5>;
- * mcu-hold-mode = <0>; // default set to 0
- *
- * To increase the frame rate, reduce all parameters because
- * the max dclk rate of mcu is 150M in rv1103/rv1106.
- */
- mcu-timing {
- mcu-pix-total = <5>;
- mcu-cs-pst = <1>;
- mcu-cs-pend = <4>;
- mcu-rw-pst = <2>;
- mcu-rw-pend = <3>;
-
- mcu-hold-mode = <0>; // default set to 0
- };
};
--
Gitblit v1.6.2