From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/arch/arm/boot/dts/omap5-cm-t54.dts | 58 +++++++++++++++++++++++++++++-----------------------------
1 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/omap5-cm-t54.dts b/kernel/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7..af288d6 100644
--- a/kernel/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/kernel/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -84,36 +84,36 @@
};
lcd0: display {
- compatible = "startek,startek-kd050c", "panel-dpi";
- label = "lcd";
+ compatible = "startek,startek-kd050c", "panel-dpi";
+ label = "lcd";
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
- enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
- panel-timing {
- clock-frequency = <33000000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <43>;
- vback-porch = <29>;
- vfront-porch = <13>;
- vsync-len = <3>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <43>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
- port {
- lcd_in: endpoint {
- remote-endpoint = <&dpi_lcd_out>;
- };
- };
- };
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ };
+ };
+ };
hdmi0: connector0 {
compatible = "hdmi-connector";
@@ -354,7 +354,7 @@
interrupt-parent = <&gpio1>;
interrupts = <15 0>; /* gpio1_wk15 */
- pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
@@ -644,8 +644,8 @@
};
&usb3 {
- extcon = <&extcon_usb3>;
- vbus-supply = <&smps10_out1_reg>;
+ extcon = <&extcon_usb3>;
+ vbus-supply = <&smps10_out1_reg>;
};
&cpu0 {
--
Gitblit v1.6.2