From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/Documentation/devicetree/bindings/sound/st,sta32x.txt | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/sound/st,sta32x.txt b/kernel/Documentation/devicetree/bindings/sound/st,sta32x.txt
index 255de3a..52265fb 100644
--- a/kernel/Documentation/devicetree/bindings/sound/st,sta32x.txt
+++ b/kernel/Documentation/devicetree/bindings/sound/st,sta32x.txt
@@ -19,6 +19,10 @@
Optional properties:
+ - clocks, clock-names: Clock specifier for XTI input clock.
+ If specified, the clock will be enabled when the codec is probed,
+ and disabled when it is removed. The 'clock-names' must be set to 'xti'.
+
- st,output-conf: number, Selects the output configuration:
0: 2-channel (full-bridge) power, 2-channel data-out
1: 2 (half-bridge). 1 (full-bridge) on-board power
@@ -38,6 +42,9 @@
- st,thermal-warning-recover:
If present, thermal warning recovery is enabled.
+
+ - st,fault-detect-recovery:
+ If present, fault detect recovery is enabled.
- st,thermal-warning-adjustment:
If present, thermal warning adjustment is enabled.
@@ -76,6 +83,8 @@
codec: sta32x@38 {
compatible = "st,sta32x";
reg = <0x1c>;
+ clocks = <&clock>;
+ clock-names = "xti";
reset-gpios = <&gpio1 19 0>;
power-down-gpios = <&gpio1 16 0>;
st,output-conf = /bits/ 8 <0x3>; // set output to 2-channel
--
Gitblit v1.6.2