From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/Documentation/devicetree/bindings/pci/pci-keystone.txt | 61 +++++++++++++++++++++++++++++-
1 files changed, 58 insertions(+), 3 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/pci/pci-keystone.txt b/kernel/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 4dd17de..47202a2 100644
--- a/kernel/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -11,13 +11,24 @@
Required Properties:-
-compatibility: "ti,keystone-pcie"
-reg: index 1 is the base address and length of DW application registers.
- index 2 is the base address and length of PCI device ID register.
+compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC
+ Should be "ti,am654-pcie-rc" for RC on AM654x SoC
+reg: Three register ranges as listed in the reg-names property
+reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
+ TI specific application registers, "config" for the
+ configuration space address
pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
interrupt-cells: should be set to 1
interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
+ (required if the compatible is "ti,keystone-pcie")
+msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt
+ (required if the compatible is "ti,am654-pcie-rc".
+
+ti,syscon-pcie-id : phandle to the device control module required to set device
+ id and vendor id.
+ti,syscon-pcie-mode : phandle to the device control module required to configure
+ PCI in either RC mode or EP mode.
Example:
pcie_msi_intc: msi-interrupt-controller {
@@ -58,3 +69,47 @@
DesignWare DT Properties not applicable for Keystone PCI
1. pcie_bus clock-names not used. Instead, a phandle to phys is used.
+
+AM654 PCIe Endpoint
+===================
+
+Required Properties:-
+
+compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC
+reg: Four register ranges as listed in the reg-names property
+reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
+ TI specific application registers, "atu" for the
+ Address Translation Unit configuration registers and
+ "addr_space" used to map remote RC address space
+num-ib-windows: As specified in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
+num-ob-windows: As specified in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
+num-lanes: As specified in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
+power-domains: As documented by the generic PM domain bindings in
+ Documentation/devicetree/bindings/power/power_domain.txt.
+ti,syscon-pcie-mode: phandle to the device control module required to configure
+ PCI in either RC mode or EP mode.
+
+Optional properties:-
+
+phys: list of PHY specifiers (used by generic PHY framework)
+phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of lanes as specified in *num-lanes* property.
+("phys" and "phy-names" DT bindings are specified in
+Documentation/devicetree/bindings/phy/phy-bindings.txt)
+interrupts: platform interrupt for error interrupts.
+
+pcie-ep {
+ compatible = "ti,am654-pcie-ep";
+ reg = <0x5500000 0x1000>, <0x5501000 0x1000>,
+ <0x10000000 0x8000000>, <0x5506000 0x1000>;
+ reg-names = "app", "dbics", "addr_space", "atu";
+ power-domains = <&k3_pds 120>;
+ ti,syscon-pcie-mode = <&pcie0_mode>;
+ num-lanes = <1>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+};
--
Gitblit v1.6.2