From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/Documentation/devicetree/bindings/display/panel/panel-simple.yaml | 74 +++++++++++++++++++++++++++++++++++++
1 files changed, 74 insertions(+), 0 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/kernel/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index edb53ab..8fcf8c0 100644
--- a/kernel/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/kernel/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -29,6 +29,10 @@
# compatible must be listed in alphabetical order, ordered by compatible.
# The description in the comment is mandatory for each compatible.
+ # common simple panel
+ - simple-panel
+ # common simple dsi panel
+ - simple-panel-dsi
# Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel
- ampire,am-1280800n3tzqw-t00h
# Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
@@ -288,6 +292,76 @@
port: true
power-supply: true
+ reset-gpios:
+ description: GPIO pin to reset the panel
+
+ prepare-delay-ms:
+ description: |
+ the time (in milliseconds) that it takes for the panel to
+ become ready and start receiving video data
+ enable-delay-ms:
+ description: |
+ the time (in milliseconds) that it takes for the panel to
+ display the first valid frame after starting to receive
+ video data
+ disable-delay-ms:
+ description: |
+ the time (in milliseconds) that it takes for the panel to
+ turn the display off (no content is visible)
+ unprepare-delay-ms:
+ description: |
+ the time (in milliseconds) that it takes for the panel
+ to power itself down completely
+ reset-delay-ms:
+ description: |
+ the time (in milliseconds) that it takes for the panel to
+ reset itself completely
+ init-delay-ms:
+ description: |
+ the time (in milliseconds) that it takes for the panel to
+ send init command sequence after reset deassert
+
+ width-mm:
+ description: width (in millimeters) of the panel's active display area
+ height-mm:
+ description: height (in millimeters) of the panel's active display area
+
+ bpc:
+ description: bits per color/component
+ bus-format:
+ description: pixel data format on the wire
+
+ dsi,lanes:
+ description: number of active data lanes
+ dsi,format:
+ description: pixel format for video mode
+ dsi,flags:
+ description: DSI operation mode related flags
+
+ panel-init-sequence: true
+ panel-exit-sequence:
+ description: |
+ A byte stream formed by simple multiple dcs packets.
+ byte 0 - dcs data type
+ byte 1 - wait number of specified ms after dcs command transmitted
+ byte 2 - packet payload length
+ byte 3 - and beyond: number byte of payload
+ rockchip,cmd-type:
+ description: default is DSI cmd, or "spi", "mcu" cmd type
+ spi-sdi:
+ description: spi init panel for spi-sdi io
+ spi-scl:
+ description: spi init panel for spi-scl io
+ spi-cs:
+ description: spi init pael for spi-cs io
+
+ power-invert:
+ description: power invert control
+ vsp-supply:
+ description: positive voltage supply
+ vsn-supply:
+ description: negative voltage supply
+
additionalProperties: false
required:
--
Gitblit v1.6.2