From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/Documentation/devicetree/bindings/board/fsl-board.txt | 30 ------------------------------
1 files changed, 0 insertions(+), 30 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/board/fsl-board.txt b/kernel/Documentation/devicetree/bindings/board/fsl-board.txt
index eb52f6b..9cde570 100644
--- a/kernel/Documentation/devicetree/bindings/board/fsl-board.txt
+++ b/kernel/Documentation/devicetree/bindings/board/fsl-board.txt
@@ -47,36 +47,6 @@
reg = <0x3 0 0x10000>;
};
-* Freescale BCSR GPIO banks
-
-Some BCSR registers act as simple GPIO controllers, each such
-register can be represented by the gpio-controller node.
-
-Required properities:
-- compatible : Should be "fsl,<board>-bcsr-gpio".
-- reg : Should contain the address and the length of the GPIO bank
- register.
-- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters (currently unused).
-- gpio-controller : Marks the port as GPIO controller.
-
-Example:
-
- bcsr@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8360mds-bcsr";
- reg = <1 0 0x8000>;
- ranges = <0 1 0 0x8000>;
-
- bcsr13: gpio-controller@d {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8360mds-bcsr-gpio";
- reg = <0xd 1>;
- gpio-controller;
- };
- };
-
* Freescale on-board FPGA connected on I2C bus
Some Freescale boards like BSC9132QDS have on board FPGA connected on
--
Gitblit v1.6.2