From 297b60346df8beafee954a0fd7c2d64f33f3b9bc Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 01:44:05 +0000
Subject: [PATCH] rtl8211F_led_control
---
kernel/include/linux/iopoll.h | 143 +++++++++++++++++++++++++++++++----------------
1 files changed, 93 insertions(+), 50 deletions(-)
diff --git a/kernel/include/linux/iopoll.h b/kernel/include/linux/iopoll.h
index b1d861c..0417360 100644
--- a/kernel/include/linux/iopoll.h
+++ b/kernel/include/linux/iopoll.h
@@ -1,15 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2012-2014 The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#ifndef _LINUX_IOPOLL_H
@@ -23,6 +14,94 @@
#include <linux/io.h>
/**
+ * read_poll_timeout - Periodically poll an address until a condition is
+ * met or a timeout occurs
+ * @op: accessor function (takes @args as its arguments)
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @sleep_us: Maximum time to sleep between reads in us (0
+ * tight-loops). Should be less than ~20ms since usleep_range
+ * is used (see Documentation/timers/timers-howto.rst).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ * @sleep_before_read: if it is true, sleep @sleep_us before read.
+ * @args: arguments for @op poll
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @args is stored in @val. Must not
+ * be called from atomic context if sleep_us or timeout_us are used.
+ *
+ * When available, you'll probably want to use one of the specialized
+ * macros defined below rather than this macro directly.
+ */
+#define read_poll_timeout(op, val, cond, sleep_us, timeout_us, \
+ sleep_before_read, args...) \
+({ \
+ u64 __timeout_us = (timeout_us); \
+ unsigned long __sleep_us = (sleep_us); \
+ ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
+ might_sleep_if((__sleep_us) != 0); \
+ if (sleep_before_read && __sleep_us) \
+ usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
+ for (;;) { \
+ (val) = op(args); \
+ if (cond) \
+ break; \
+ if (__timeout_us && \
+ ktime_compare(ktime_get(), __timeout) > 0) { \
+ (val) = op(args); \
+ break; \
+ } \
+ if (__sleep_us) \
+ usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
+ cpu_relax(); \
+ } \
+ (cond) ? 0 : -ETIMEDOUT; \
+})
+
+/**
+ * read_poll_timeout_atomic - Periodically poll an address until a condition is
+ * met or a timeout occurs
+ * @op: accessor function (takes @args as its arguments)
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @delay_us: Time to udelay between reads in us (0 tight-loops). Should
+ * be less than ~10us since udelay is used (see
+ * Documentation/timers/timers-howto.rst).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ * @delay_before_read: if it is true, delay @delay_us before read.
+ * @args: arguments for @op poll
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @args is stored in @val.
+ *
+ * When available, you'll probably want to use one of the specialized
+ * macros defined below rather than this macro directly.
+ */
+#define read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, \
+ delay_before_read, args...) \
+({ \
+ u64 __timeout_us = (timeout_us); \
+ unsigned long __delay_us = (delay_us); \
+ ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
+ if (delay_before_read && __delay_us) \
+ udelay(__delay_us); \
+ for (;;) { \
+ (val) = op(args); \
+ if (cond) \
+ break; \
+ if (__timeout_us && \
+ ktime_compare(ktime_get(), __timeout) > 0) { \
+ (val) = op(args); \
+ break; \
+ } \
+ if (__delay_us) \
+ udelay(__delay_us); \
+ cpu_relax(); \
+ } \
+ (cond) ? 0 : -ETIMEDOUT; \
+})
+
+/**
* readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs
* @op: accessor function (takes @addr as its only argument)
* @addr: Address to poll
@@ -30,7 +109,7 @@
* @cond: Break condition (usually involving @val)
* @sleep_us: Maximum time to sleep between reads in us (0
* tight-loops). Should be less than ~20ms since usleep_range
- * is used (see Documentation/timers/timers-howto.txt).
+ * is used (see Documentation/timers/timers-howto.rst).
* @timeout_us: Timeout in us, 0 means never timeout
*
* Returns 0 on success and -ETIMEDOUT upon a timeout. In either
@@ -41,25 +120,7 @@
* macros defined below rather than this macro directly.
*/
#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \
-({ \
- u64 __timeout_us = (timeout_us); \
- unsigned long __sleep_us = (sleep_us); \
- ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
- might_sleep_if((__sleep_us) != 0); \
- for (;;) { \
- (val) = op(addr); \
- if (cond) \
- break; \
- if (__timeout_us && \
- ktime_compare(ktime_get(), __timeout) > 0) { \
- (val) = op(addr); \
- break; \
- } \
- if (__sleep_us) \
- usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
- } \
- (cond) ? 0 : -ETIMEDOUT; \
-})
+ read_poll_timeout(op, val, cond, sleep_us, timeout_us, false, addr)
/**
* readx_poll_timeout_atomic - Periodically poll an address until a condition is met or a timeout occurs
@@ -69,7 +130,7 @@
* @cond: Break condition (usually involving @val)
* @delay_us: Time to udelay between reads in us (0 tight-loops). Should
* be less than ~10us since udelay is used (see
- * Documentation/timers/timers-howto.txt).
+ * Documentation/timers/timers-howto.rst).
* @timeout_us: Timeout in us, 0 means never timeout
*
* Returns 0 on success and -ETIMEDOUT upon a timeout. In either
@@ -79,25 +140,7 @@
* macros defined below rather than this macro directly.
*/
#define readx_poll_timeout_atomic(op, addr, val, cond, delay_us, timeout_us) \
-({ \
- u64 __timeout_us = (timeout_us); \
- unsigned long __delay_us = (delay_us); \
- ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
- for (;;) { \
- (val) = op(addr); \
- if (cond) \
- break; \
- if (__timeout_us && \
- ktime_compare(ktime_get(), __timeout) > 0) { \
- (val) = op(addr); \
- break; \
- } \
- if (__delay_us) \
- udelay(__delay_us); \
- } \
- (cond) ? 0 : -ETIMEDOUT; \
-})
-
+ read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, false, addr)
#define readb_poll_timeout(addr, val, cond, delay_us, timeout_us) \
readx_poll_timeout(readb, addr, val, cond, delay_us, timeout_us)
--
Gitblit v1.6.2