From 297b60346df8beafee954a0fd7c2d64f33f3b9bc Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 01:44:05 +0000
Subject: [PATCH] rtl8211F_led_control
---
kernel/drivers/target/target_core_fabric_lib.c | 123 +++++++++++++++++-----------------------
1 files changed, 53 insertions(+), 70 deletions(-)
diff --git a/kernel/drivers/target/target_core_fabric_lib.c b/kernel/drivers/target/target_core_fabric_lib.c
index 939c621..6600ae4 100644
--- a/kernel/drivers/target/target_core_fabric_lib.c
+++ b/kernel/drivers/target/target_core_fabric_lib.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*******************************************************************************
* Filename: target_core_fabric_lib.c
*
@@ -7,20 +8,6 @@
* (c) Copyright 2010-2013 Datera, Inc.
*
* Nicholas A. Bellinger <nab@linux-iscsi.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
******************************************************************************/
@@ -145,33 +132,27 @@
unsigned char *buf)
{
u32 off = 4, padding = 0;
+ int isid_len;
u16 len = 0;
spin_lock_irq(&se_nacl->nacl_sess_lock);
/*
- * From spc4r17 Section 7.5.4.6: TransportID for initiator
- * ports using SCSI over iSCSI.
+ * Only null terminate the last field.
*
- * The null-terminated, null-padded (see 4.4.2) ISCSI NAME field
- * shall contain the iSCSI name of an iSCSI initiator node (see
- * RFC 3720). The first ISCSI NAME field byte containing an ASCII
- * null character terminates the ISCSI NAME field without regard for
- * the specified length of the iSCSI TransportID or the contents of
- * the ADDITIONAL LENGTH field.
+ * From spc4r37 section 7.6.4.6: TransportID for initiator ports using
+ * SCSI over iSCSI.
+ *
+ * Table 507 TPID=0 Initiator device TransportID
+ *
+ * The null-terminated, null-padded (see 4.3.2) ISCSI NAME field shall
+ * contain the iSCSI name of an iSCSI initiator node (see RFC 7143).
+ * The first ISCSI NAME field byte containing an ASCII null character
+ * terminates the ISCSI NAME field without regard for the specified
+ * length of the iSCSI TransportID or the contents of the ADDITIONAL
+ * LENGTH field.
*/
len = sprintf(&buf[off], "%s", se_nacl->initiatorname);
- /*
- * Add Extra byte for NULL terminator
- */
- len++;
- /*
- * If there is ISID present with the registration and *format code == 1
- * 1, use iSCSI Initiator port TransportID format.
- *
- * Otherwise use iSCSI Initiator device TransportID format that
- * does not contain the ASCII encoded iSCSI Initiator iSID value
- * provied by the iSCSi Initiator during the iSCSI login process.
- */
+ off += len;
if ((*format_code == 1) && (pr_reg->isid_present_at_reg)) {
/*
* Set FORMAT CODE 01b for iSCSI Initiator port TransportID
@@ -179,8 +160,12 @@
*/
buf[0] |= 0x40;
/*
- * From spc4r17 Section 7.5.4.6: TransportID for initiator
- * ports using SCSI over iSCSI. Table 390
+ * From spc4r37 Section 7.6.4.6
+ *
+ * Table 508 TPID=1 Initiator port TransportID.
+ *
+ * The ISCSI NAME field shall not be null-terminated
+ * (see 4.3.2) and shall not be padded.
*
* The SEPARATOR field shall contain the five ASCII
* characters ",i,0x".
@@ -190,23 +175,24 @@
* (see RFC 3720) in the form of ASCII characters that are the
* hexadecimal digits converted from the binary iSCSI initiator
* session identifier value. The first ISCSI INITIATOR SESSION
- * ID field byte containing an ASCII null character
+ * ID field byte containing an ASCII null character terminates
+ * the ISCSI INITIATOR SESSION ID field without regard for the
+ * specified length of the iSCSI TransportID or the contents
+ * of the ADDITIONAL LENGTH field.
*/
- buf[off+len] = 0x2c; off++; /* ASCII Character: "," */
- buf[off+len] = 0x69; off++; /* ASCII Character: "i" */
- buf[off+len] = 0x2c; off++; /* ASCII Character: "," */
- buf[off+len] = 0x30; off++; /* ASCII Character: "0" */
- buf[off+len] = 0x78; off++; /* ASCII Character: "x" */
+ buf[off++] = 0x2c; /* ASCII Character: "," */
+ buf[off++] = 0x69; /* ASCII Character: "i" */
+ buf[off++] = 0x2c; /* ASCII Character: "," */
+ buf[off++] = 0x30; /* ASCII Character: "0" */
+ buf[off++] = 0x78; /* ASCII Character: "x" */
len += 5;
- buf[off+len] = pr_reg->pr_reg_isid[0]; off++;
- buf[off+len] = pr_reg->pr_reg_isid[1]; off++;
- buf[off+len] = pr_reg->pr_reg_isid[2]; off++;
- buf[off+len] = pr_reg->pr_reg_isid[3]; off++;
- buf[off+len] = pr_reg->pr_reg_isid[4]; off++;
- buf[off+len] = pr_reg->pr_reg_isid[5]; off++;
- buf[off+len] = '\0'; off++;
- len += 7;
+
+ isid_len = sprintf(buf + off, "%s", pr_reg->pr_reg_isid);
+ off += isid_len;
+ len += isid_len;
}
+ buf[off] = '\0';
+ len += 1;
spin_unlock_irq(&se_nacl->nacl_sess_lock);
/*
* The ADDITIONAL LENGTH field specifies the number of bytes that follow
@@ -249,7 +235,7 @@
*/
if (pr_reg->isid_present_at_reg) {
len += 5; /* For ",i,0x" ASCII separator */
- len += 7; /* For iSCSI Initiator Session ID + Null terminator */
+ len += strlen(pr_reg->pr_reg_isid);
*format_code = 1;
} else
*format_code = 0;
@@ -278,9 +264,7 @@
char **port_nexus_ptr)
{
char *p;
- u32 tid_len, padding;
int i;
- u16 add_len;
u8 format_code = (buf[0] & 0xc0);
/*
* Check for FORMAT CODE 00b or 01b from spc4r17, section 7.5.4.6:
@@ -306,23 +290,11 @@
*/
if (out_tid_len) {
/* The shift works thanks to integer promotion rules */
- add_len = get_unaligned_be16(&buf[2]);
-
- tid_len = strlen(&buf[4]);
- tid_len += 4; /* Add four bytes for iSCSI Transport ID header */
- tid_len += 1; /* Add one byte for NULL terminator */
- padding = ((-tid_len) & 3);
- if (padding != 0)
- tid_len += padding;
-
- if ((add_len + 4) != tid_len) {
- pr_debug("LIO-Target Extracted add_len: %hu "
- "does not match calculated tid_len: %u,"
- " using tid_len instead\n", add_len+4, tid_len);
- *out_tid_len = tid_len;
- } else
- *out_tid_len = (add_len + 4);
+ *out_tid_len = get_unaligned_be16(&buf[2]);
+ /* Add four bytes for iSCSI Transport ID header */
+ *out_tid_len += 4;
}
+
/*
* Check for ',i,0x' separator between iSCSI Name and iSCSI Initiator
* Session ID as defined in Table 390 - iSCSI initiator port TransportID
@@ -347,6 +319,16 @@
* iscsi_target.c:lio_sess_get_initiator_sid()
*/
for (i = 0; i < 12; i++) {
+ /*
+ * The first ISCSI INITIATOR SESSION ID field byte
+ * containing an ASCII null character terminates the
+ * ISCSI INITIATOR SESSION ID field without regard for
+ * the specified length of the iSCSI TransportID or the
+ * contents of the ADDITIONAL LENGTH field.
+ */
+ if (*p == '\0')
+ break;
+
if (isdigit(*p)) {
p++;
continue;
@@ -354,7 +336,8 @@
*p = tolower(*p);
p++;
}
- }
+ } else
+ *port_nexus_ptr = NULL;
return &buf[4];
}
--
Gitblit v1.6.2