From 297b60346df8beafee954a0fd7c2d64f33f3b9bc Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 01:44:05 +0000
Subject: [PATCH] rtl8211F_led_control
---
kernel/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 32 +++++++++-----------------------
1 files changed, 9 insertions(+), 23 deletions(-)
diff --git a/kernel/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/kernel/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 4fb3dcb..d8f0863 100644
--- a/kernel/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/kernel/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1,8 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* QLogic qlcnic NIC Driver
* Copyright (c) 2009-2013 QLogic Corporation
- *
- * See LICENSE.qlcnic for copyright and licensing details.
*/
#include <linux/types.h>
@@ -20,7 +19,7 @@
int stat_offset;
};
-#define QLC_SIZEOF(m) FIELD_SIZEOF(struct qlcnic_adapter, m)
+#define QLC_SIZEOF(m) sizeof_field(struct qlcnic_adapter, m)
#define QLC_OFF(m) offsetof(struct qlcnic_adapter, m)
static const u32 qlcnic_fw_dump_level[] = {
0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff
@@ -353,7 +352,7 @@
case QLCNIC_BRDTYPE_P3P_4_GB_MM:
supported |= SUPPORTED_Autoneg;
advertising |= ADVERTISED_Autoneg;
- /* fall through */
+ fallthrough;
case QLCNIC_BRDTYPE_P3P_10G_CX4:
case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
@@ -377,7 +376,7 @@
supported |= SUPPORTED_TP;
check_sfp_module = netif_running(adapter->netdev) &&
ahw->has_link_events;
- /* fall through */
+ fallthrough;
case QLCNIC_BRDTYPE_P3P_10G_XFP:
supported |= SUPPORTED_FIBRE;
advertising |= ADVERTISED_FIBRE;
@@ -1543,24 +1542,7 @@
if (ethcoal->rx_coalesce_usecs > 0xffff ||
ethcoal->rx_max_coalesced_frames > 0xffff ||
ethcoal->tx_coalesce_usecs > 0xffff ||
- ethcoal->tx_max_coalesced_frames > 0xffff ||
- ethcoal->rx_coalesce_usecs_irq ||
- ethcoal->rx_max_coalesced_frames_irq ||
- ethcoal->tx_coalesce_usecs_irq ||
- ethcoal->tx_max_coalesced_frames_irq ||
- ethcoal->stats_block_coalesce_usecs ||
- ethcoal->use_adaptive_rx_coalesce ||
- ethcoal->use_adaptive_tx_coalesce ||
- ethcoal->pkt_rate_low ||
- ethcoal->rx_coalesce_usecs_low ||
- ethcoal->rx_max_coalesced_frames_low ||
- ethcoal->tx_coalesce_usecs_low ||
- ethcoal->tx_max_coalesced_frames_low ||
- ethcoal->pkt_rate_high ||
- ethcoal->rx_coalesce_usecs_high ||
- ethcoal->rx_max_coalesced_frames_high ||
- ethcoal->tx_coalesce_usecs_high ||
- ethcoal->tx_max_coalesced_frames_high)
+ ethcoal->tx_max_coalesced_frames > 0xffff)
return -EINVAL;
err = qlcnic_config_intr_coalesce(adapter, ethcoal);
@@ -1835,6 +1817,8 @@
}
const struct ethtool_ops qlcnic_ethtool_ops = {
+ .supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+ ETHTOOL_COALESCE_MAX_FRAMES,
.get_drvinfo = qlcnic_get_drvinfo,
.get_regs_len = qlcnic_get_regs_len,
.get_regs = qlcnic_get_regs,
@@ -1866,6 +1850,8 @@
};
const struct ethtool_ops qlcnic_sriov_vf_ethtool_ops = {
+ .supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+ ETHTOOL_COALESCE_MAX_FRAMES,
.get_drvinfo = qlcnic_get_drvinfo,
.get_regs_len = qlcnic_get_regs_len,
.get_regs = qlcnic_get_regs,
--
Gitblit v1.6.2