From 297b60346df8beafee954a0fd7c2d64f33f3b9bc Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 01:44:05 +0000
Subject: [PATCH] rtl8211F_led_control
---
kernel/drivers/mmc/host/sdhci-pci-o2micro.c | 372 ++++++++++++++++++++++++++++++++++++++++++++++++----
1 files changed, 339 insertions(+), 33 deletions(-)
diff --git a/kernel/drivers/mmc/host/sdhci-pci-o2micro.c b/kernel/drivers/mmc/host/sdhci-pci-o2micro.c
index e248d79..7223479 100644
--- a/kernel/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/kernel/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -1,25 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2013 BayHub Technology Ltd.
*
* Authors: Peter Guo <peter.guo@bayhubtech.com>
* Adam Lee <adam.lee@canonical.com>
* Ernest Zhang <ernest.zhang@bayhubtech.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/pci.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/delay.h>
+#include <linux/iopoll.h>
#include "sdhci.h"
#include "sdhci-pci.h"
@@ -39,8 +31,11 @@
#define O2_SD_CAPS 0xE0
#define O2_SD_ADMA1 0xE2
#define O2_SD_ADMA2 0xE7
+#define O2_SD_MISC_CTRL2 0xF0
#define O2_SD_INF_MOD 0xF1
#define O2_SD_MISC_CTRL4 0xFC
+#define O2_SD_MISC_CTRL 0x1C0
+#define O2_SD_PWR_FORCE_L0 0x0002
#define O2_SD_TUNING_CTRL 0x300
#define O2_SD_PLL_SETTING 0x304
#define O2_SD_MISC_SETTING 0x308
@@ -60,6 +55,138 @@
#define O2_SD_VENDOR_SETTING2 0x1C8
#define O2_SD_HW_TUNING_DISABLE BIT(4)
+#define O2_PLL_DLL_WDT_CONTROL1 0x1CC
+#define O2_PLL_FORCE_ACTIVE BIT(18)
+#define O2_PLL_LOCK_STATUS BIT(14)
+#define O2_PLL_SOFT_RESET BIT(12)
+#define O2_DLL_LOCK_STATUS BIT(11)
+
+#define O2_SD_DETECT_SETTING 0x324
+
+static const u32 dmdn_table[] = {0x2B1C0000,
+ 0x2C1A0000, 0x371B0000, 0x35100000};
+#define DMDN_SZ ARRAY_SIZE(dmdn_table)
+
+struct o2_host {
+ u8 dll_adjust_count;
+};
+
+static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host)
+{
+ ktime_t timeout;
+ u32 scratch32;
+
+ /* Wait max 50 ms */
+ timeout = ktime_add_ms(ktime_get(), 50);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT
+ == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT)
+ break;
+
+ if (timedout) {
+ pr_err("%s: Card Detect debounce never finished.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return;
+ }
+ udelay(10);
+ }
+}
+
+static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
+{
+ ktime_t timeout;
+ u16 scratch;
+ u32 scratch32;
+
+ /* PLL software reset */
+ scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
+ scratch32 |= O2_PLL_SOFT_RESET;
+ sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
+ udelay(1);
+ scratch32 &= ~(O2_PLL_SOFT_RESET);
+ sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
+
+ /* PLL force active */
+ scratch32 |= O2_PLL_FORCE_ACTIVE;
+ sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1);
+ if (scratch & O2_PLL_LOCK_STATUS)
+ break;
+ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ goto out;
+ }
+ udelay(10);
+ }
+
+ /* Wait for card detect finish */
+ udelay(1);
+ sdhci_o2_wait_card_detect_stable(host);
+
+out:
+ /* Cancel PLL force active */
+ scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
+ scratch32 &= ~O2_PLL_FORCE_ACTIVE;
+ sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
+}
+
+static int sdhci_o2_get_cd(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS))
+ sdhci_o2_enable_internal_clock(host);
+ else
+ sdhci_o2_wait_card_detect_stable(host);
+
+ return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
+}
+
+static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
+{
+ u32 scratch_32;
+
+ pci_read_config_dword(chip->pdev,
+ O2_SD_PLL_SETTING, &scratch_32);
+
+ scratch_32 &= 0x0000FFFF;
+ scratch_32 |= value;
+
+ pci_write_config_dword(chip->pdev,
+ O2_SD_PLL_SETTING, scratch_32);
+}
+
+static u32 sdhci_o2_pll_dll_wdt_control(struct sdhci_host *host)
+{
+ return sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
+}
+
+/*
+ * This function is used to detect dll lock status.
+ * Since the dll lock status bit will toggle randomly
+ * with very short interval which needs to be polled
+ * as fast as possible. Set sleep_us as 1 microsecond.
+ */
+static int sdhci_o2_wait_dll_detect_lock(struct sdhci_host *host)
+{
+ u32 scratch32 = 0;
+
+ return readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
+ scratch32, !(scratch32 & O2_DLL_LOCK_STATUS), 1, 1000000);
+}
+
static void sdhci_o2_set_tuning_mode(struct sdhci_host *host)
{
u16 reg;
@@ -74,7 +201,7 @@
{
int i;
- sdhci_send_tuning(host, MMC_SEND_TUNING_BLOCK_HS200);
+ sdhci_send_tuning(host, opcode);
for (i = 0; i < 150; i++) {
u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
@@ -97,21 +224,122 @@
sdhci_reset_tuning(host);
}
+/*
+ * This function is used to fix o2 dll shift issue.
+ * It isn't necessary to detect card present before recovery.
+ * Firstly, it is used by bht emmc card, which is embedded.
+ * Second, before call recovery card present will be detected
+ * outside of the execute tuning function.
+ */
+static int sdhci_o2_dll_recovery(struct sdhci_host *host)
+{
+ int ret = 0;
+ u8 scratch_8 = 0;
+ u32 scratch_32 = 0;
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+ struct sdhci_pci_chip *chip = slot->chip;
+ struct o2_host *o2_host = sdhci_pci_priv(slot);
+
+ /* UnLock WP */
+ pci_read_config_byte(chip->pdev,
+ O2_SD_LOCK_WP, &scratch_8);
+ scratch_8 &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+ while (o2_host->dll_adjust_count < DMDN_SZ && !ret) {
+ /* Disable clock */
+ sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
+
+ /* PLL software reset */
+ scratch_32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
+ scratch_32 |= O2_PLL_SOFT_RESET;
+ sdhci_writel(host, scratch_32, O2_PLL_DLL_WDT_CONTROL1);
+
+ pci_read_config_dword(chip->pdev,
+ O2_SD_FUNC_REG4,
+ &scratch_32);
+ /* Enable Base Clk setting change */
+ scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
+ pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG4, scratch_32);
+ o2_pci_set_baseclk(chip, dmdn_table[o2_host->dll_adjust_count]);
+
+ /* Enable internal clock */
+ scratch_8 = SDHCI_CLOCK_INT_EN;
+ sdhci_writeb(host, scratch_8, SDHCI_CLOCK_CONTROL);
+
+ if (sdhci_o2_get_cd(host->mmc)) {
+ /*
+ * need wait at least 5ms for dll status stable,
+ * after enable internal clock
+ */
+ usleep_range(5000, 6000);
+ if (sdhci_o2_wait_dll_detect_lock(host)) {
+ scratch_8 |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writeb(host, scratch_8,
+ SDHCI_CLOCK_CONTROL);
+ ret = 1;
+ } else {
+ pr_warn("%s: DLL unlocked when dll_adjust_count is %d.\n",
+ mmc_hostname(host->mmc),
+ o2_host->dll_adjust_count);
+ }
+ } else {
+ pr_err("%s: card present detect failed.\n",
+ mmc_hostname(host->mmc));
+ break;
+ }
+
+ o2_host->dll_adjust_count++;
+ }
+ if (!ret && o2_host->dll_adjust_count == DMDN_SZ)
+ pr_err("%s: DLL adjust over max times\n",
+ mmc_hostname(host->mmc));
+ /* Lock WP */
+ pci_read_config_byte(chip->pdev,
+ O2_SD_LOCK_WP, &scratch_8);
+ scratch_8 |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+ return ret;
+}
+
static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct sdhci_host *host = mmc_priv(mmc);
int current_bus_width = 0;
+ u32 scratch32 = 0;
+ u16 scratch = 0;
/*
* This handler only implements the eMMC tuning that is specific to
* this controller. Fall back to the standard method for other TIMING.
*/
- if (host->timing != MMC_TIMING_MMC_HS200)
+ if ((host->timing != MMC_TIMING_MMC_HS200) &&
+ (host->timing != MMC_TIMING_UHS_SDR104))
return sdhci_execute_tuning(mmc, opcode);
- if (WARN_ON(opcode != MMC_SEND_TUNING_BLOCK_HS200))
+ if (WARN_ON((opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
+ (opcode != MMC_SEND_TUNING_BLOCK)))
return -EINVAL;
+ /* Force power mode enter L0 */
+ scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
+ scratch |= O2_SD_PWR_FORCE_L0;
+ sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
+
+ /* wait DLL lock, timeout value 5ms */
+ if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
+ scratch32, (scratch32 & O2_DLL_LOCK_STATUS), 1, 5000))
+ pr_warn("%s: DLL can't lock in 5ms after force L0 during tuning.\n",
+ mmc_hostname(host->mmc));
+ /*
+ * Judge the tuning reason, whether caused by dll shift
+ * If cause by dll shift, should call sdhci_o2_dll_recovery
+ */
+ if (!sdhci_o2_wait_dll_detect_lock(host))
+ if (!sdhci_o2_dll_recovery(host)) {
+ pr_err("%s: o2 dll recovery failed\n",
+ mmc_hostname(host->mmc));
+ return -EINVAL;
+ }
/*
* o2 sdhci host didn't support 8bit emmc tuning
*/
@@ -134,21 +362,16 @@
sdhci_set_bus_width(host, current_bus_width);
}
+ /* Cancel force power mode enter L0 */
+ scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
+ scratch &= ~(O2_SD_PWR_FORCE_L0);
+ sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
+
+ sdhci_reset(host, SDHCI_RESET_CMD);
+ sdhci_reset(host, SDHCI_RESET_DATA);
+
host->flags &= ~SDHCI_HS400_TUNING;
return 0;
-}
-
-static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
-{
- u32 scratch_32;
- pci_read_config_dword(chip->pdev,
- O2_SD_PLL_SETTING, &scratch_32);
-
- scratch_32 &= 0x0000FFFF;
- scratch_32 |= value;
-
- pci_write_config_dword(chip->pdev,
- O2_SD_PLL_SETTING, scratch_32);
}
static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
@@ -174,7 +397,6 @@
scratch_32 |= O2_SD_LED_ENABLE;
pci_write_config_dword(chip->pdev,
O2_SD_TEST_REG, scratch_32);
-
}
static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
@@ -286,16 +508,67 @@
host->irq = pci_irq_vector(chip->pdev, 0);
}
-int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
+static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
+{
+ /* Enable internal clock */
+ clk |= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ sdhci_o2_enable_internal_clock(host);
+ if (sdhci_o2_get_cd(host->mmc)) {
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+ }
+}
+
+static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ u16 clk;
+ u8 scratch;
+ u32 scratch_32;
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+ struct sdhci_pci_chip *chip = slot->chip;
+
+ host->mmc->actual_clock = 0;
+
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
+ pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+
+ scratch &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+ pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
+
+ if ((scratch_32 & 0xFFFF0000) != 0x2c280000)
+ o2_pci_set_baseclk(chip, 0x2c280000);
+
+ pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+
+ scratch |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+ }
+
+ clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
+ sdhci_o2_enable_clk(host, clk);
+}
+
+static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
{
struct sdhci_pci_chip *chip;
struct sdhci_host *host;
+ struct o2_host *o2_host = sdhci_pci_priv(slot);
u32 reg, caps;
int ret;
chip = slot->chip;
host = slot->host;
+ o2_host->dll_adjust_count = 0;
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
/*
@@ -329,7 +602,17 @@
host->flags |= SDHCI_SIGNALING_180;
host->mmc->caps2 |= MMC_CAP2_NO_SD;
host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ pci_write_config_dword(chip->pdev,
+ O2_SD_DETECT_SETTING, 3);
}
+
+ slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
+ }
+
+ if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD1) {
+ slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
+ host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
}
host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
@@ -349,7 +632,7 @@
return 0;
}
-int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
+static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
{
int ret;
u8 scratch;
@@ -503,9 +786,6 @@
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
case PCI_DEVICE_ID_O2_SEABIRD0:
- if (chip->pdev->revision == 0x01)
- chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
- /* fall through */
case PCI_DEVICE_ID_O2_SEABIRD1:
/* UnLock WP */
ret = pci_read_config_byte(chip->pdev,
@@ -543,6 +823,12 @@
/* Set Tuning Windows to 5 */
pci_write_config_byte(chip->pdev,
O2_SD_TUNING_CTRL, 0x55);
+ //Adjust 1st and 2nd CD debounce time
+ pci_read_config_dword(chip->pdev, O2_SD_MISC_CTRL2, &scratch_32);
+ scratch_32 &= 0xFFE7FFFF;
+ scratch_32 |= 0x00180000;
+ pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32);
+ pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1);
/* Lock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
@@ -557,9 +843,29 @@
}
#ifdef CONFIG_PM_SLEEP
-int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
+static int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
{
sdhci_pci_o2_probe(chip);
return sdhci_pci_resume_host(chip);
}
#endif
+
+static const struct sdhci_ops sdhci_pci_o2_ops = {
+ .set_clock = sdhci_pci_o2_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+const struct sdhci_pci_fixes sdhci_o2 = {
+ .probe = sdhci_pci_o2_probe,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
+ .probe_slot = sdhci_pci_o2_probe_slot,
+#ifdef CONFIG_PM_SLEEP
+ .resume = sdhci_pci_o2_resume,
+#endif
+ .ops = &sdhci_pci_o2_ops,
+ .priv_size = sizeof(struct o2_host),
+};
--
Gitblit v1.6.2